Bedienungsanleitung Tascam CD-200BT (Seite 8 von 32) (Englisch)

587253

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

8 TASCAM CD-200BT

1 – Introduction

Trademarks

• TASCAM is a registered trademark of TEAC Corporation.

• The Bluetooth® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by TEAC CORPORATION is under license.

and the aptX logo are trade marks of CSR plc or one of its

group companies and may be registered in one or more

jurisdictions.

• MPEG Layer-3 audio coding technology licensed from

Fraunhofer IIS and Thomson.

• Other company names, product names and logos in this

document are the trademarks or registered trademarks of

their respective owners.

Any data, including, but not limited to information,

described herein are intended only as illustrations of such

data and/or information and not as the specifications for

such data and/or information. TEAC Corporation disclaims

any warranty that any use of such data and/or information

shall be free from infringement of any third party’s intel-

lectual property rights or other proprietary rights, and

further, assumes no liability of whatsoever nature in the

event of any such infringement, or arising from or connected

with or related to the use of such data and/or information.

This product is designed to help you record and reproduce

sound works to which you own the copyright, or where

you have obtained permission from the copyright holder or

the rightful licensor. Unless you own the copyright, or have

obtained the appropriate permission from the copyright

holder or the rightful licensor, your unauthorized recording,

reproduction or distribution thereof may result in severe

criminal penalties under copyright laws and international

contact your legal advisor. Under no circumstances will TEAC

Corporation be responsible for the consequences of any

illegal copying performed using the recorder.

Precautions for placement

• The operating temperature should be between 5°C and

35°C (41°F and 95°F).

• Make sure that the unit is mounted in a level position for

correct operation.

• Do not place any object on the unit for heat dissipation.

• Avoid installing this unit on top of any heat-generating

electrical device such as a power amplifier.

Power supply

Connect the unit to the standard power outlet. Hold the plug

when connecting and disconnecting the power cord.

Beware of condensation

If the unit is moved from a cold to a warm place, or used

immediately after a cold room has been heated or otherwise

exposed to a sudden temperature change, condensation could

occur. Should this happen, leave the unit for one or two hours

before turning the unit on.

Cleaning the unit

To clean the unit, wipe it gently with a soft dry cloth. Do not

wipe with chemical cleaning cloths, paint thinner, ethyl alcohol

or other chemical agents to clean the unit as they could damage

the surface.

Once every five years, please contact the retailer where you

purchased the unit or a TASCAM service center for internal

cleaning. If the unit is not cleaned for a long time and dust is

allowed to accumulate inside it, fire or malfunction could result.

Cleaning is more effective when conducted before the humid

season. Please check with us about the cost of internal cleaning.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-200BT Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info