Bedienungsanleitung Tascam CD-200BT (Seite 21 von 32) (Englisch)

587253

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

TASCAM CD-200BT 21

4 – CD playback

Data CD example

NOTE

If the program is already set, the track number of the track

set as program step 01 is shown.

2. Use the remote number (0–9) buttons or search (m/.

and //,) buttons to select a track to set as program

step 01 (

PROG

and the track number blink).

Use the number (0–9) buttons to input the number starting

with the largest digit.

Track number Playback time

Audio CD example

Data CD example

NOTE

• When using a data CD, the screen switches to file name

display if more than a second passes after pressing one

of the remote number (0–9) or search (m/. and

//,) buttons, but you can still add the track to the

program.

• If you press the STOP button while a track is selected,

selection of that track is canceled, and the screen returns to

the state where you can select a track.

3. Press the remote PROGRAM EDIT button to add the

selected track as program step 1.

4. The unit is now ready for you to add another track as the

next program step.

5. If you are finished adding tracks to the program, press the

remote PROGRAM EDIT button when the empty program

step is shown.

The unit exits program setting mode.

NOTE

• The same track can be added to the program multiple times.

• If you press the STOP button when the empty program step

where it is possible to add a track appears, all steps in the

program are cleared.

• If you try to add more than 99 tracks, a

PGM FULL

error

message appears. Only 99 tracks can be added.

Checking the program

You can check the contents of the program.

1. Press the PROGRAM EDIT button on the remote control

while playback is stopped to put the unit into program

setting mode.

The track number and playback time of the track set as

program step 01 is shown on the screen and

PROG

blinks.

(Playback time is not displayed when using a data CD.)

Track number Playback time

2. Press the PROGRAM EDIT button to show the track infor-

mation of the next program step.

3. If you press the PROGRAM EDIT button when the final

program step is shown, it becomes possible to add another

program step. (No track number is shown and

PROG

blinks.)

4. Press the PROGRAM EDIT button again to exit the program

setting mode.

Replacing a program track

You can replace a track that has already been added to the

program.

1. Press the PROGRAM EDIT button on the remote control

while playback is stopped to put the unit into program

mode.

2. Follow the steps in “Checking the program” above and press

the PROGRAM EDIT button to show the program step with

the track that you want to replace.

3. Use the remote number (0–9) buttons or skip (m/.

and //,) buttons to select the desired track and press

the PROGRAM EDIT button.

After replacing a track, the display shows the empty step at

the end of the program and you can add another track to

the end of the program if desired.

4. Press the PROGRAM EDIT button again to exit program

setting mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-200BT Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info