Bedienungsanleitung Tascam CD-200BT (Seite 28 von 32) (Englisch)

587253

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

28 TASCAM CD-200BT

7 – Troubleshooting

If you have problems with your system, look through this

chart and see if you can solve the problem yourself before

calling the nearest retailer or TASCAM representative.

8No power

e Is the unit’s power plug completely inserted into a working

power outlet?

8Remote control doesn’t work.

e Check to see if the batteries are properly installed in the

remote control.

e If the batteries are dead, change the batteries.

8No sound

e Check the connection to the monitor system again.

e Check the volume and settings of the amplifier.

8There is unwanted noise.

e Are the connecting cables all properly connected and

functioning?

8A CD cannot be played back.

e If you are using a data CD with MP3 files, confirm that the file

bit-rates are compatible with this unit.

e Is the disc scratched or dirty?

8I cannot play back all the files on a data CD.

e Make sure the unit is not in folder playback mode.

8I cannot use program playback.

e Make sure the playback area is not set to

ALL PLAY

To use program playback with data CDs, the playback area

must be set to

FOLDER

8The audio skips or there is noise.

e Is there a wireless LAN, another Bluetooth device, a

microwave oven or a similar device nearby? Use this unit as

far as possible from such devices.

e Reduce the distance between the Bluetooth device and this

unit when using them together. Try changing the positions

of the Bluetooth device and this unit.

e If you are using any applications on a smart phone other

than one for audio playback, the sound might skip. If this

occurs, stop the operation of applications other then the one

for audio playback.

8The unit cannot connect to the device or

transmission between them is disrupted.

e Confirm that the Bluetooth device’s power is on and that its

Bluetooth function is also on.

e Is the Bluetooth device too far from the unit? Is a wall or

other obstacle interfering with transmission?

If the Bluetooth device is behind this unit, the unit itself

could be blocking transmission.

Change the positions of the Bluetooth device and this unit.

e Try turning this unit off and than on again.

e Delete the “CD-200BT” pairing from the Bluetooth device

and then follow the procedures in “Pairing” to pair with it

again.

8Cannot pair with a device.

e Confirm that the Bluetooth device you want to pair with

supports A2DP and AVRCP.

e Confirm that the Bluetooth device you want to connect with

is able to communicate. For details, refer to the operation

manual of that device.

e Turn this unit and the Bluetooth device off once and on

again, and then try pairing them.

e Turn off any other Bluetooth devices other than the one that

you are trying to pair with.

e Delete the “CD-200BT” pairing from the Bluetooth device

and then try pairing again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-200BT Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info