Bedienungsanleitung Tascam CD-200i (Seite 27 von 36) (Englisch)

587251

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

TASCAM CD-200i

4 − Playing Back CDs

If you press the STOP key when the empty program

•

step where it is possible to add a track appears, all

steps in the program are cleared.

If you try to add more than 99 tracks, a “PGM FULL”

•

error message appears. Only 99 tracks can be added.

Checking the program

You can check the contents of the program.

1 Press the PROGRAM EDIT key on the remote control

while playback is stopped to put the unit into pro-

gram setting mode.

The track number and playback time of the track set as

program step 01 is shown on the screen (playback time

is not displayed if the loaded disc is a data CD) and

MEMORY

blinks.

Program step

Playback time

Track number

2 Press the PROGRAM EDIT key to show the track

information of the next program step.

3 If you press the PROGRAM EDIT key when the final

program step is shown, it becomes possible to add

another program step. (No track number is dis-

played and the MEMORY indicator blinks.)

4 Press the PROGRAM EDIT key again to exit the pro-

gram setting mode.

Replacing a program track

You can replace a track that has already been added to the

program.

1 Press the PROGRAM EDIT key on the remote control

while playback is stopped to put the unit into pro-

gram mode.

2 Follow the steps in “Checking the program” above

and press the PROGRAM EDIT key to show the pro-

gram step with the track that you want to replace.

3 Use the numeric keys or skip (Ô/Â, ¯/)

keys to select the desired track and press the

PROGRAM EDIT key.

After replacing a track, the display shows the empty

step at the end of the program and you can add

another track to the end of the program if desired.

4. Press the PROGRAM EDIT key again to exit pro-

gram setting mode.

Adding more program tracks

You can add tracks to the end of an already set program.

1. Press the PROGRAM EDIT key on the remote control

while playback is stopped to put the unit into pro-

gram setting mode.

2 Press the PROGRAM EDIT key until the empty

program step where it is possible to add a track

appears. (No track number is displayed and the

MEMORY indicator blinks.)

3 Use the numeric keys or skip (Ô/Â, ¯/)

keys to select a track and press the PROGRAM EDIT

key.

4 In this state, you can repeat step 3 to add more

tracks, or you can press the PROGRAM EDIT key to

exit program setting mode.

CAUTION

Although tracks can be added to the end of a

•

program and tracks can be replaced with different

tracks, tracks cannot be inserted into the middle of a

program.

If you want to insert a track into the middle of the

•

program, replace and add program tracks to alter

the program contents.

Clearing the program

You can clear the entire program that has been set.

1 Press the PROGRAM EDIT key on the remote control

while playback is stopped to put this unit into pro-

gram setting mode.

2 Press the PROGRAM EDIT key until the empty pro-

gram step appears. (No track number is displayed

and MEMORY blinks.)

3 Press the STOP key. “-CLEAR-” appears on the

display. After the program is cleared, program set-

ting mode resumes without any tracks added to the

program.

In addition to the above procedure, opening the disc

tray also clears the program.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-200i Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info