Bedienungsanleitung Tascam CD-200SB (Seite 38 von 48) (Englisch)

587254

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

TASCAM CD-200SB

7 – Dubbing (copying)

Using this unit’s dubbing (copying) function you can dub the

content of a CD to an SD card or USB flash drive. Moreover, you

can change the format used for the dubbed files.

Dubbing overview

When this unit dubs a CD to an SD card or USB flash drive, it

plays the CD back continuously regardless of the playback mode

setting.

When dubbing a data CD, depending on the playback area

setting, the entire CD (

ALL PLAY

) or the current folder (

FOLDER

)

will be dubbed to the SD card or USB flash drive.

Dubbing always creates new folders and creates the dubbed

files in those folders.

Dubbing never deletes existing files.

A dubbed folder can be assigned as a direct folder to the

selected main unit FOLDER/TRACK SELECT (1–10/0) button or

remote number (1–10/0) button.

Formats of dubbed files

This unit can create dubbed files in the following formats.

WAV

MP3 (HQ/MQ/LQ)

NOTE

When dubbing, a folder named “/music/albumXXX/” (“XXX” is a

3-digit number, such as “001”) is created on the media used for

dubbing, and a file is created for each dubbed CD track with a file

name in the format “trackXXX.wav” (or “trackXXX.mp3”).

When set to ALL PLAY, if you dub a data CD with multiple folders,

all the files will be dubbed to single folder.

Operation during dubbing

During dubbing, this unit operates in the following manner.

o The audio of the CD being dubbed is output.

o SD cards and USB flash drives cannot be played back.

o Continuous playback mode is used for CD playback

regardless of the playback mode setting.

NOTE

•

Depending on the SD card or USB flash drive used for

dubbing, recording might not be able to keep up with the

audio input. If this occurs, the CD playback sound might skip

or parts of the audio might be repeated during playback.

This will not, however, affect the recording to the SD card or

USB flash drive.

•

When an audio CD is dubbed, silent gaps will occur between

dubbed tracks when they are played back even if the audio

on the CD was continuous between tracks.

•

When dubbing a data CD, it does not simply copy the files on

the CD to the SD card or USB flash drive.

•

Regardless of the sampling rates of the source files, the

dubbed files will all be converted to a sampling rate of 44.1

kHz.

Dubbing is not possible in the following cases.

Dubbing source cannot be an SD card or USB flash

drive

This unit can only dub from audio and data CDs. It cannot

dub the content of an SD card or USB flash drive.

Dubbing destination media is write-protected

PROTECT

will appear on the display for a few seconds and

the unit will return to its previous state.

Dubbing destination does not have enough open

space

FULL

will appear on the display for a few seconds and the

unit will return to its previous state. Furthermore, if the

dubbing destination runs out of space during dubbing,

FULL

will appear on the screen for a few seconds and

dubbing will stop.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-200SB Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info