Bedienungsanleitung Tascam CD-500B (Seite 21 von 40) (Englisch)

587258

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

TASCAM CD-500/500B 21

5 – Operation

Loading discs

Inserting a disc

Hold the disc with its label side up and insert it part way

into the disc slot. Push the disc in a little further and, just

before it disappears, it should automatically be pulled

into the player. After a disc is loaded, the player will read

its information. If it is an audio CD, the display will show

the total number of tracks and total playback time. If it is

a data CD, the display will show the total number of tracks

in the current directory.

CAUTION

•

You cannot load a disc when the power is off.

•

In order to prevent the accidental insertion of a disc

when another disc is already loaded, this unit is

equipped with a "disc stopper". (After a disc is loaded,

the stopper in the insertion slot rises.)

When inserting a disc, pulling it out when it is partially

inserted or forcing it in with excessive strength, for

example, could scratch the disc or damage the unit.

•

If the disc becomes caught or is otherwise difficult

to push, do not force it in. Press the EJECT button

and remove the disc once before trying to reinsert it.

Forcing the disc into the player could damage the disc

or even break the player.

•

If a disc other than an audio CD is inserted or a disc is

inserted upside down, it will automatically be ejected.

•

8-cm CDs cannot be used with this unit. If an 8-cm CD

is inserted, it will automatically be ejected. If it is not

automatically ejected completely, press the EJECT

button.

Ejecting a disc

Press the EJECT button on the player or the remote to

eject the disc part way. Pull the disc out the rest of the

way by its edges.

CAUTION

The EJECT buttons on the player and the remote do not

function when the player’s power is off.

Eject block function

The eject block function allows you to disable the

operation of the EJECT buttons on the player and the

remote during playback and when paused in order to

prevent playback from being interrupted accidentally by

the pressing one of these buttons.

To turn the eject block function on, set the

02 EJECT

menu item to

NOTE

The eject block function on/off setting is maintained even

when the player’s power is turned off.

Playing back a CD

The following procedures assume that the necessary

connections have been completed, the player’s power has

been turned on and a CD (audio or data) has been loaded.

To start playback, press the Á (play) [REPEAT] button on

the player or the Á PLAY button on the remote.

Stopping playback

Press the ª (stop) [INTRO CHECK] button on the player

or the ª STOP button on the remote.

Pausing playback

Press the π (pause) [JOG] button on the player or the π

PAUSE button on the remote.

To restart playback, press the Á (play) [REPEAT] button

on the player or the Á PLAY button on the remote.

NOTE

In this manual, unless stated otherwise, explanations

assume that continuous playback mode is enabled. (See

“Playback modes” on page 23.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-500B Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info