587259
5
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
D01168520B
CD-6010
CD Player
OWNER'S MANUAL
2 TASCAM CD-6010
IMPORTANT SAFETY INSTRUCTIONSv
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within equilateral triangle, is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8 Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
9 Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod, bracket, or
table specied by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13 Unplug this apparatus during lightning storms or
when unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Do not expose this apparatus to drips or splashes.
Do not place any objects filled with liquids, such as
vases, on the apparatus.
Do not install this apparatus in a confined space such
as a book case or similar unit.
The apparatus draws nominal non-operating power
from the AC outlet with its POWER or STANDBY/ON
switch not in the ON position.
The apparatus should be located close enough to the
AC outlet so that you can easily grasp the power cord
plug at any time.
The mains plug is used as the disconnect device, the
disconnect device shall remain readily operable.
Products with Class I construction are equipped with a
power supply cord that has a grounding plug. The cord
of such a product must be plugged into an AC outlet
that has a protective grounding connection.
If the product uses batteries (including a battery pack
or installed batteries), they should not be exposed to
sunshine, fire or excessive heat.
CAUTION for products that use replaceable lithium
batteries: there is danger of explosion if a battery is
replaced with an incorrect type of battery. Replace only
with the same or equivalent type.
Caution should be taken when using earphones or
headphones with the product because excessive
sound pressure (volume) from earphones or head-
phones can cause hearing loss.
In North America use only on 120V supply.
TASCAM CD-6010 3
Safety Information
RACK-MOUNTING THE UNIT
ª
Use the supplied rack-mounting kit to mount the unit in a
standard 19-inch rack, as shown below.
Remove the feet of the unit before mounting.
NOTE
Leave 1U of space above the unit for ventilation.
Allow at least 10 cm (4 in) at the rear of the unit for
ventilation.
For U.S.A.
ª
TO THE USER
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user
will be required to correct the interference at his own
expense.
CAUTION
Changes or modifications to this equipment not expressly
approved by TEAC CORPORATION for compliance could
void the user's authority to operate this equipment.
For European Customers
ª
CE Marking Information
a) Applicable electromagnetic environment: E4
b) Peak inrush current: 14 A
Disposal of electrical and electronic equipment
(a) All electrical and electronic equipment should be
disposed of separately from the municipal waste
stream via collection facilities designated by the
government or local authorities.
(b) By disposing of electrical and electronic equipment
correctly, you will help save valuable resources and
prevent any potential negative effects on human
health and the environment.
(c) Improper disposal of waste electrical and electronic
equipment can have serious effects on the
environment and human health because of the
presence of hazardous substances in the equipment.
(d) The Waste Electrical and Electronic Equipment (WEEE)
symbol, which shows a wheeled bin that has been
crossed out, indicates that electrical and electronic
equipment must be collected and disposed of
separately from household waste.
(e) Return and collection systems are available to end
users. For more detailed information about the
disposal of old electrical and electronic equipment,
please contact your city office, waste disposal service
or the shop where you purchased the equipment.
Disposal of batteries and/or accumulators
(a) Waste batteries and/or accumulators should be
disposed of separately from the municipal waste
stream via collection facilities designated by the
government or local authorities.
(b) By disposing of waste batteries and/or accumulators
correctly, you will help save valuable resources and
prevent any potential negative effects on human
health and the environment.
(c) Improper disposal of waste batteries and/or
accumulators can have serious effects on the
environment and human health because of the
presence of hazardous substances in them.
(d) The WEEE symbol, which shows a wheeled bin that
has been crossed out, indicates that batteries and/
or accumulators must be collected and disposed of
separately from household waste.
Pb, Hg, C d
If a battery or accumulator contains more than the
specified values of lead (Pb), mercury (Hg), and/
or cadmium (Cd) as defined in the Battery Directive
(2006/66/EC), then the chemical symbols for those
elements will be indicated beneath the WEEE symbol.
(e) Return and collection systems are available to end
users. For more detailed information about the
disposal of waste batteries and/or accumulators,
please contact your city office, waste disposal service
or the shop where you purchased them.
WARNING
This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the
user may be required to take adequate measures.
4 TASCAM CD-6010
Safety Information
ª
CAUTIONS ABOUT BATTERIES
This product uses batteries. Misuse of batteries could
cause a leak, rupture or other trouble. Always abide by the
following precautions when using batteries.
Never recharge non-rechargeable batteries. The
batteries could rupture or leak, causing fire or injury.
When installing batteries, pay attention to the polarity
indications (plus/minus (+/–) orientation), and
install them correctly in the battery compartment as
indicated. Putting them in backward could make the
batteries rupture or leak, causing fire, injury or stains
around them.
When you store or dispose batteries, isolate their terminals
with insulation tape or something like that to prevent
them from contacting other batteries or metallic objects.
When throwing used batteries away, follow the
disposal instructions indicated on the batteries and the
local disposal laws.
Do not use batteries other than those specified. Do not
mix and use new and old batteries or different types of
batteries together. The batteries could rupture or leak,
causing fire, injury or stains around them.
Do not carry or store batteries together with small
metal objects. The batteries could short, causing leak,
rupture or other trouble.
Do not heat or disassemble batteries. Do not put them
in fire or water. Batteries could rupture or leak, causing
fire, injury or stains around them.
If the battery fluid leaks, wipe away any fluid on
the battery case before inserting new batteries. If
the battery fluid gets in an eye, it could cause loss
of eyesight. If fluid does enter an eye, wash it out
thoroughly with clean water without rubbing the eye
and then consult a doctor immediately. If the fluid
gets on a persons body or clothing, it could cause skin
injuries or burns. If this should happen, wash it off with
clean water and then consult a doctor immediately.
The unit power should be off when you install and
replace batteries.
Remove the batteries if you do not plan to use the unit
for a long time. Batteries could rupture or leak, causing
fire, injury or stains around them. If the battery fluid
leaks, wipe away any fluid on the battery compartment
before inserting new batteries.
Do not disassemble a battery. The acid inside the
battery could harm skin or clothing.
CAUTIONS ABOUT LASER RADIATION
ª
This product has been designed and manufactured
according to FDA regulations “title 21, CFR, chapter 1,
subchapter J, based on the Radiation Control for Health
and Safety Act of 1968, and is classified as a class 1 laser
product. There is no hazardous invisible laser radiation
during operation because invisible laser radiation emitted
inside of this product is completely confined in the
protective housings.
The label required in this regulation is shown at 1.
Cautions:
DO NOT REMOVE THE PROTECTIVE HOUSING USING A
SCREWDRIVER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
IF THIS PRODUCT DEVELOPS TROUBLE, CONTACT YOUR
NEAREST QUALIFIED SERVICE PERSONNEL, AND DO
NOT USE THE PRODUCT IN ITS DAMAGED STATE.
Optical pickup
Type : HOF-1501XB
Manufacturer : Hitachi Media Electronics
Laser output : Less than 0.5 mW on the objective lens
Wavelength : 785 nm ±22nm
Standard : IEC60825-1 : 2007
This appliance has a serial number located on the
rear panel. Please record the model number and
serial number and retain them for your records.
Model number
______________________________
Serial number
______________________________
TASCAM CD-6010 5
Contents
1 – Introduction ..............................................7
Features ..................................................................................7
Included items .....................................................................7
About this manual .............................................................. 8
Trademarks ............................................................................8
Precautions for placement and use ..............................8
Connecting the power ......................................................8
Beware of condensation ................................................... 8
Cleaning the unit .................................................................8
About discs ............................................................................9
Handling of compact discs .......................................9
2 – Names and Functions of Parts ...............10
Front panel ..........................................................................10
Rear panel ............................................................................12
Display ...................................................................................13
Wireless remote control (TASCAM RC-500) .............14
3 – Preparation ..............................................16
Making connections ........................................................16
Preparing the remote control ......................................17
Inserting batteries ......................................................17
When to replace the batteries ............................... 17
Precautions about using batteries ....................... 17
Precautions about using the remote control ...17
Remote control reception settings .............................17
Panel lock function ..........................................................18
4 – Menu ........................................................19
Menu structure ..................................................................19
Menu operation basics ...................................................19
5 – Operation ................................................20
Compatible disc and file types ....................................20
Directories and tracks on data CDs ............................20
Loading discs .....................................................................21
Inserting a disc ............................................................21
Ejecting a disc ..............................................................21
Tray lock function .............................................................21
Playing back a CD ..............................................................21
Selecting a track ................................................................22
Skipping to the next or previous track ...............22
Designating track numbers ....................................22
Selecting indexes and directories ..............................22
Using the SEARCH buttons ............................................23
Using the jog function to search .................................23
Playback modes .................................................................23
Selecting the playback mode ...............................23
6 – Various Playback Functions ...................24
Auto-cue function ...........................................................24
Setting the auto-cue level ......................................24
Auto-ready function .......................................................24
Resume function ...............................................................24
Call function .......................................................................25
Cue function .......................................................................25
Setting cue points ......................................................25
Using cue points .........................................................25
Clearing cue points ....................................................25
Incremental play function ............................................25
Repeat playback ...............................................................26
Ordinary repeat playback ......................................26
A-B repeat playback ..................................................26
Intro check mode .............................................................27
Power on play function ...................................................27
Pitch control playback .....................................................27
Setting the pitch adjustment increment ...........28
Changing playback speed without changing
pitch (KEY ORIG) ...............................................................28
Program playback ............................................................28
Program setting mode .............................................28
Checking the program ............................................29
Editing the program ..................................................29
Fade in/fade out playback .............................................30
Skip back playback ..........................................................30
Setting the skip back time ......................................30
Flash start function ..........................................................30
Relay playback ..................................................................31
7 – Other Functions ......................................32
Changing the playback time display mode .............32
Frame time display setting ...........................................32
End of track warning (TRACK EOM) ............................32
End of disc warning (Disc EOM) ...................................32
Interval time setting ........................................................33
Outputting in mono ........................................................33
Controlling the player with a footswitch .................33
Setting the footswitch .............................................33
Using the footswitch .................................................33
Footswitch mode settings ......................................33
Controlling the player with a direct playback
remote ...................................................................................34
Fader and event start ......................................................34
Fader start and stop ..................................................34
Event start ....................................................................34
Using the RS-232C connector ......................................34
Setting the baud rate ...............................................34
Restoring factory default settings ..............................34
6 TASCAM CD-6010
Contents
Checking the firmware version ....................................35
Digital output format setting ......................................35
Analog output attenuation ...........................................35
Using the parallel connector ........................................35
8 – Troubleshooting .....................................36
9 – Error Messages ........................................37
10 – Specifications ........................................38
Media and formats ...........................................................38
Analog audio output ......................................................38
Digital audio output .......................................................38
Control input and output ..............................................38
Audio performance ..........................................................38
Backup memory ...............................................................39
General .................................................................................39
Dimensional drawings ....................................................39
For China
CD -6010
TASCAM CD-6010 7
1 – Introduction
Thank you very much for purchasing the TASCAM
CD-6010 CD Player.
Before connecting and using the unit, please take time to
read this manual thoroughly to ensure you understand
how to properly set up and connect the unit, as well as
the operation of its many useful and convenient functions.
After you have finished reading this manual, please keep
it in a safe place for future reference.
You can also download the Owner's Manual from the
TASCAM web site (http://tascam.com/).
Features
Anti-shock memory prevents skipping caused by
vibrations, for example
±16% pitch control
Plays ordinary audio CDs and CD-R discs, including files
in both MP3 and WAV formats
Cueing with one-frame precision
Parallel control connector
When using the parallel connector, the transport mode,
including fader start and event start, as well as flash
start and direct start modes can be set
RS-232C serial connector can be used to connect a
computer or external controller to control the unit
Memory can store program and cue point information
for up to 100 discs
Incremental play function
Auto-ready function can automatically pause playback
after track completes playing at the beginning of the
next track
Auto-cue function can ready the unit to start playback
of a track from the moment sound starts
Transport and pitch can be controlled using a TASCAM
RC-3F footswitch (sold separately)
Supports direct start and flash start using RC-SS20
(parallel connector) and RC-20 (remote connector)
units (sold separately)
Flash start function enables playback without delay
(up to 20 tracks: tracks 1–20, the first 20 tracks in the
program or the first 20 cue points)
Number buttons on the front panel can be used
for track selection, cue point recall and flash start
operation
Skip back function can go back a few seconds (amount
can be set) during playback
TASCAM RC-500 wireless remote control included (can
be disabled using a setting on the main unit)
Gap between tracks during playback can be set
Balanced output level can be set by making an internal
adjustment (please contact customer support)
Analog output attenuation function
Panel buttons can be locked to prevent misoperation
Tray lock function can be used to prevent the tray from
being opened during playback or when paused
High-performance tray-loading CD drive
RCA unbalanced outputs
Coaxial digital output
XLR balanced outputs
XLR digital output
Monophonic output possible
Playback modes include all tracks (ALL), one track
(SINGLE), program (up to 100 tracks) and random
Repeat function for all playback modes and A-B interval
looping
Display can be set to show track elapsed time, track
remaining time or disc remaining time
CALL function can be used to return to the last point
where playback started
Intro check function
Fade in and fade out can be set from 0 to 10 seconds in
0.5-second intervals
Automatic playback when power turned on possible
Relay playback of multiple units possible
Index search (audio CD (CD-DA) only) and directory
search (MP3 or WAV file discs only) functions
Resume function remembers the last point when
playback stopped
Support for EOM display showing the end of a track
Monitoring features on the front panel include a
headphones jack, a speaker with an ON/OFF switch
and a level knob
Included items
The included items are listed below.
Take care when opening the package not to damage the
items. Keep the package materials for transportation in
the future.
Please contact the store where you purchased this unit
if any of these items are missing or have been damaged
during transportation.
Main unit
........................................................................................ 1
Power cord
.................................................................................... 1
Wireless remote control (TASCAM RC-500)
....................... 1
AAA batteries for the remote control unit
......................... 2
A rack-mounting screw kit
....................................................... 1
A warranty card
........................................................................... 1
Owners manual (this manual)
............................................... 1
8 TASCAM CD-6010
1 – Introduction
About this manual
In this manual, we use the following conventions:
The names of buttons and controls are given in the
following typeface: SHIFT.
Messages on the units display are shown like this:
ON
The CD-DA format may also be mentioned as
audio
CD” format.
CDs on which MP3 or WAV audio files are recorded may
be mentioned as data CDs”.
Additional information is introduced in the styles
below when needed:
NOTE
Explanation of actions in special situation and supplement.
CAUTION
Instructions that should be followed to avoid injury, damage
to the unit or other equipment, and loss of data.
Trademarks
TASCAM is a trademark of TEAC Corporation, registered
in the U.S. and other countries.
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
Other company names, product names and logos
in this document are the trademarks or registered
trademarks of their respective owners.
Precautions for placement and
use
The operating temperature should be between 5°C and
35°C (41°F and 95°F).
Do not install in the following types of places. Doing
so could degrade the sound quality and/or cause
malfunctions.
Places with significant vibrations or that are
otherwise unstable
Near windows or other places exposed to direct
sunlight
Near heaters or other extremely hot places
Extremely cold places
Places with bad ventilation or high humidity
Very dusty locations
This unit can be installed at an angle of ±15°.
Do not place any object on the unit for heat dissipation.
Avoid installing this unit on top of any heat-generating
electrical device such as a power amplifier.
To mount this unit in a rack, use the included rack
mounting screw kit to mount it as shown below. Leave
at least 1 U (5 cm) of open space above the unit.
Connecting the power
Insert the included power cord into the
AC IN
connector completely.
Hold the power cord by the plug when connecting or
disconnecting it.
Beware of condensation
If the unit is moved from a cold to a warm place, or
used immediately after a cold room has been heated or
otherwise exposed to a sudden temperature change,
condensation could occur. Should this happen, leave the
unit for one or two hours before turning the unit on.
Cleaning the unit
To clean the unit, wipe it gently with a soft dry cloth. Do
not wipe with chemical cleaning cloths, benzene, paint
thinner, ethyl alcohol or other chemical agents to clean
the unit as they could damage the surface.
TASCAM CD-6010 9
1 – Introduction
About discs
In addition to commercially-available music CDs, this unit
can play CD-R discs that have been recorded in audio CD
(CD-DA) format, as well as CD-R discs that have MP3 audio
and WAV audio files recorded on them.
Handling of compact discs
Always insert the compact discs in the slot with their
label facing upward.
To remove a disc from its case, press down on the
center of the disc holder, then lift the disc out, holding
it carefully by the edges.
Do not touch the signal side (the unlabeled side).
Fingerprints, oils and other substances can cause errors
during playback.
To clean the signal side of a disc, wipe gently with a soft
dry cloth from the center towards the outside edge.
Dirt on discs can lower the sound quality, so clean
them and always store them in a clean state.
Do not use any record spray, anti-static solutions,
benzene, paint thinner or other chemical agents to
clean CDs as they could damage the delicate playing
surface. It may cause CDs to become unplayable.
Do not apply labels or other materials to discs. Do
not use discs that have had tape, stickers or other
materials applied to their surface. Do not use discs that
have sticky residue from stickers, etc. Such discs could
become stuck in the unit or cause it to malfunction.
Never use a commercially available CD stabilizer. Using
stabilizers with this player will damage the mechanism
and cause it to malfunction.
Do not use cracked discs.
Only use circular compact discs. Avoid using non-
circular promotional discs, etc.
Music discs with copy control, a copy-protection
system, have been released form several record
companies in an attempt to protect the copyright.
Since some of these discs do not comply with the CD
specifications, they may not be playable on the unit.
10 TASCAM CD-6010
2 – Names and Functions of Parts
Front panel
1 POWER switch
Press to turn the power on and off.
CAUTION
Before turning the power on, minimize the volume of other
equipment that is connected to this unit. Failure to do so
might cause sudden loud noises, which could harm your
hearing or result in other trouble.
2 Disc tray
Press the OPEN/CLOSE button to open the disc tray
when you want to load or remove a disc.
To close the disc tray, press the OPEN/CLOSE button
again.
3 OPEN/CLOSE button
Press to open and close the disc tray.
4 SHIFT button and indicator
Press this button to activate shift mode. When the
shift mode is active, the indicator lights and the shift
functions of other buttons are enabled. (Shift functions
are shown below buttons with white lettering on a
dark blue background.) After pressing one of these
buttons, shift mode is automatically ended and the
indicator becomes unlit.
NOTE
When in shift mode, press the SHIFT button again to end
shift mode (and turn off the indicator). After searching
folders/directories, if the SHIFT indicator is lit, press the
SHIFT button to end shift mode.
You can also press a button with a shift function while
pressing and holding the SHIFT button to use its shift
function.
5DISPLAY [LOCK] button
Press this button when the playback time is shown to
switch the playback time display mode (track elapsed
time, track remaining time or total remaining time).
(See “Changing the playback time display mode on
page 32.)
When in menu mode, press this button to exit menu
mode.
To turn the panel lock function on and off, press and
hold this button when in shift mode (when the SHIFT
indicator is lit) or while pressing the SHIFT button.
This function prevents the use of the buttons to avoid
misoperation.
6 Display
Shows various types of information.
7 TRACK SKIP/DATA [INDEX/DIR SEARCH] knob
This is a multifunction knob that works as both a dial
and a button. Use this knob to select (skip) tracks,
select indexes, select directories, set the pitch control
value, use menus, set the A-B repeat interval and as a
jog dial, for example.
To select an index, turn this knob when in shift mode
(when the SHIFT indicator is lit) or while pressing the
SHIFT button. When working with a data CD, use this
function to select a directory. What happens after
selection depends on the auto cue function setting.
(See "Skipping to the next or previous track" on page
22.)
When in program setting mode, use this function to
select tracks.
When in menu mode, turn this knob to select items
and press it to confirm a selection. (See “Menu
operation basics on page 19.)
When in pitch adjustment mode, turn this knob to
adjust the pitch value. (See "Pitch control playback" on
page 27.)
When in jog mode, use this knob as a jog dial to search
one frame at a time. (See “Using the jog function to
search on page 23.)
When using the A-B repeat function, press this knob
to set the A and B points. (See A-B repeat playback” on
page 26.)
8JOG [PITCH] button
Press this button to start jog mode. (See "Using the jog
function to search" on page 23.)
To turn the pitch function ON/OFF, press this button
when in shift mode (when the SHIFT indicator is lit) or
while pressing the SHIFT button. (See "Pitch control
playback" on page 27.)
TASCAM CD-6010 11
2 – Names and Functions of Parts
9 MENU [PITCH] button
Press this button to start menu mode. When in menu
mode, press this button to exit menu mode. (See
"Menu operation basics" on page 19.)
To enter pitch adjustment mode, press this button
when in shift mode (when the SHIFT indicator is lit) or
while pressing the SHIFT button. (See "Pitch control
playback" on page 27.)
0 SPEAKER, ON/OFF switch, LEVEL knob
& PHONES jack
Use the built-in mono speaker or stereo headphones
to monitor the playback signal without needing to
connect speakers.
Use the SPEAKER switch to turn the built-in speaker
ON and OFF.
When headphones are connected, this speaker is
disabled regardless of the SPEAKER switch position.
Connect stereo headphones to the standard stereo
PHONES jack.
Use the LEVEL knob to adjust the output level of the
built-in speaker and the headphones.
CAUTION
Before connecting headphones, turn the LEVEL knob to
minimize the volume. Failure to do so might cause sudden
loud noises, which could harm your hearing or result in other
trouble.
q REMOTE jack (2.5mm TRS)
Use this jack to connect a TASCAM RC-3F footswitch
or TASCAM RC-20 direct playback remote control (sold
separately). Use a remote control for flash starting and
stopping playback, for example.
w CLEAR button
Press this button to cancel the input of a number
button.
When the CUE mode is ON, press a number button
while pressing and holding this button to clear the
corresponding cue point.
Press and hold when the program menu is open to
clear all programs.
e Number buttons
Use these number buttons to designate track numbers
to select songs. Input two digits for audio CDs and
three digits for data CDs. (See “Designating track
numbers” on page 22.)
When CUE mode is on, use the number buttons to
add, recall and delete cue points (up to 20). (See "Cue
function" on page 25.)
When the flash start function is on, use the number
buttons to flash start tracks or cue points.
Use the +10 button to switch between 1-10 and 11-20
for flash start program numbers, track numbers and
cue numbers.
r Force eject hole
If the tray will not open ordinarily, insert a fine rod,
such as a paperclip, here and press to open the tray.
CAUTION
Always turn the power OFF before using the force eject hole.
t CUE button
Press to turn cue mode ON/OFF.
y FLASH button
Press to turn the flash start function ON/OFF.
u ª STOP [INTRO CHECK] button
Press to stop playback.
If the incremental playback function is activated, press
this button during playback to pause at the beginning
of the next track.
When stopped, to activate the intro check mode,
press this button when in shift mode (when the SHIFT
indicator is lit) or while pressing the SHIFT button.
When this mode is activated, press the Á (play)
button to play the first 10 seconds of each track in
succession. (See “Intro check mode on page 27.)
i CALL button
Press this button to return to the point where playback
was last started and pause.
o Á PLAY button and indicator
When stopped, press this button to start playback. (The
indicator lights during playback.)
When paused, press this button to resume playback.
During playback, press this button to return to the
point that was previously set. (See “Skip back playback”
on page 30.)
p π PAUSE button and indicator
Press during playback to pause (indicator lights).
When the auto-cue function is on, press when stopped
to pause at the instant when sound begins in track 1.
When the auto-cue function is off, press when stopped
to pause at the beginning of track 1.
a SEARCH Ô/ [AUTO CUE/AUTO READY]
buttons
During playback or when paused, press the Ô
button to search backward, and press the button
to search forward. (See “Using the SEARCH buttons” on
page 23.)
When in program setting mode, use these to select the
program number. (See “Program playback” on page
28.)
To turn the auto-cue function on and off, press the
Ô button when in shift mode (when the SHIFT
indicator is lit) or while pressing the SHIFT button. (See
Auto-cue function on page 24.)
To turn the auto-ready function on and off, press the
button when in shift mode (when the SHIFT
indicator is lit) or while pressing the SHIFT button. (See
Auto-ready function” on page 24.)
12 TASCAM CD-6010
2 – Names and Functions of Parts
s PLAY MODE [REPEAT] button
Press this button to cycle through the playback modes
in the following order. (See "Playback modes" on page
23.)
Ordinary
playback
Single
playback
Program
playback
Random
playback
To turn repeat playback ON/OFF, press this button when
in shift mode (when the SHIFT indicator is lit) or while
pressing the SHIFT button.
During playback or when paused, to turn A-B repeat
mode ON, press and hold this button for at least 1
second when in shift mode (when the SHIFT indicator is
lit) or while pressing the SHIFT button. (See "A-B repeat
playback" on page 26.)
d Remote control receiver
This receives signals from the included TASCAM RC-500
wireless remote control. Point the end of the remote
control toward here when using it.
f ANALOG OUTPUTS (BALANCED) connectors
These are balanced analog outputs for the CD
playback signal. The maximum output level is +24 dBu.
(1: GND, 2: HOT, 3: COLD)
NOTE
The maximum output level of the analog balanced
outputs can be changed internally. Contact our
customer support for details.
g ANALOG OUTPUTS (UNBALANCED) jacks
These are analog outputs for the CD playback signal.
The maximum output level is +6 dBV.
h DIGITAL OUTPUTS (COAXIAL) connector
This outputs the CD playback as a S/PDIF or AES/
EBU digital signal. Set the format of the output signal
using the
22 D-OUT
menu item. (See “Digital output
format setting on page 35.)
NOTE
When playing back MP3 or WAV files, the sampling
frequency of this unit’s digital outputs is 44.1 kHz.
When using the pitch control function while playing
an audio CD or another disc with MP3 or WAV files, the
digital output is at a fixed sampling frequency of 44.1
kHz.
j DIGITAL OUTPUTS (XLR) connector
This outputs the CD playback as a S/PDIF or AES/
EBU digital signal. Set the format of the output signal
using the
22 D-OUT
menu item. (See “Digital output
format setting on page 35.)
k CONTROL I/O RS-232C connector
This is a D-sub 9-pin RS-232C serial control connector.
Connect an external controller, for example, here. (See
“Using the RS-232C connector on page 34.)
l CONTROL I/O PARALLEL connector
This is a D-sub 25-pin parallel control connector. Use
this to connect an external controller, for example. (See
"Relay playback" on page 31, “Fader start and stop on
page 34 and “Using the parallel connector” on page
35.)
; AC IN connector
Connect the included power cord here.
Rear panel
TASCAM CD-6010 13
2 – Names and Functions of Parts
1 Track number
This shows the track number during playback and
track selection.
When an audio CD is loaded, a two-digit track number
is shown. When a data CD is loaded, a three-digit track
number is shown
When in menu mode, the menu number is shown
here.
2 TRACK indicator
This appears when a disc that has files that this unit
can play back is loaded.
3 MP3 indicator
This appears when a data CD is loaded.
4 INDEX DIR number
During playback and selection, the index number
(audio CD) or directory number (data CD) is shown
here.
5 Playback time display mode indicator
When the time display is showing the playback time,
the following appears depending on the display mode.
(See “Changing the playback time display mode on
page 32.)
When the playback time display mode is set to
remaining time,
T.REMAIN
appears.
When the playback time display mode is set to track
remaining time,
REMAIN
appears.
When the playback time display mode is set to
track elapsed time, nothing appears here. Likewise,
nothing appears when in menu mode or program
setting mode.
6 Time display
This shows the time of the current playback position.
When in menu mode, the menu item is shown. When
menu items are shown, the letters appear as follows.
7 Playback mode indicators
The current playback mode is shown.
Ordinary (all tracks)
playback mode:
Nothing appears
Single playback mode:
S
appears
Program playback mode:
PGM
appears
Random playback mode:
RANDOM
appears
8 Repeat mode indicators
The repeat mode is shown. (See “Repeat playback” on
page 26 and A-B repeat playback” on page 26.)
Repeat mode:
REPEAT
appears
A-B repeat mode:
REPEAT
and
A-B
appear
(Before the A and B points have been set, the indicator
shown here will vary depending on the status. For
details, see A-B repeat playback” on page 26.)
9 PITCH indicator (and pitch adjustment)
When the pitch control function is ON,
PITCH
appears, and the amount of speed change is shown.
(See “Pitch control playback” on page 27.)
When in menu mode, the setting value of the menu
item is shown.
0 A. CUE (auto-cue) indicator
When the auto-cue function is on,
AUTO CUE
appears. (See Auto-cue function on page 24.)
q A.RDY (auto-ready) indicator
When the auto-ready function is on,
A.RDY
appears.
(See Auto-ready function” on page 24.)
w FADE indicator
When the fade in/out function is on,
FADE
appears.
(See “Fade in/fade out playback on page 30.)
e MONO indicator
When the mono output function is on,
MONO
appears.
(See “Outputting in mono on page 33.)
r RESUME indicator
When the resume function is on,
RESUME
appears.
(See “Resume function” on page 24.)
t INCR indicator (incremental play)
When the incremental play function is on,
INCR
appears. (See “Incremental play function on page 25.)
y KEY ORIG (original key) indicator
When the original key function is on,
KEY ORIG
appears. (See “Changing the playback speed without
changing the pitch (KEY ORIG)” on page 28.)
Display
14 TASCAM CD-6010
2 – Names and Functions of Parts
1 FLASH button
Press to turn the flash start function on and off.
2 DISPLAY button
Press this button to change the playback time display
mode shown (track elapsed time, track remaining time
or remaining time). (See “Changing the playback time
display mode on page 32.)
When in menu mode, press this button to exit menu
mode.
3 PITCH and −/+ buttons
Press the PITCH button to turn the pitch control
function on and off. Use the and + buttons to set the
pitch control value. (See “Pitch control playback on
page 27.)
4 A.CUE/DEL button
Press this to turn the auto-cue function on and off. (See
Auto-cue function on page 24.)
Use this also to delete program tracks. (See “Program
playback” on page 28.)
5 A.RDY/INS button
Press this to turn the auto-ready function on and off.
(See Auto-ready function” on page 24.)
Use this also to add program tracks. (See “Program
playback” on page 28.)
6 MENU button
Press this button to enter menu mode. When in menu
mode, press this button to exit menu mode. (See “Menu
operation basics on page 19.)
7 ENTER button
When in menu mode, press to confirm a menu item
selection or setting value. (See “Menu operation basics”
on page 19.)
When using the A-B repeat function, press this to set
the A and B points. (See A-B repeat playback” on page
26.)
8 Number buttons
Use these number buttons to designate track numbers
to select songs. Input two digits for audio CDs and
three digits for data CDs. (See “Designating track
numbers” on page 22.)
9 SKIP (Â/¯) buttons
Use these buttons for track selection (skipping).
Set the auto-cue function to determine what happens
after selection. (See “Skipping to the next or previous
track” on page 22.)
In program setting mode, use these to select tracks for
the program. (See “Program playback” on page 28.)
0 INDEX/DIR SEARCH (Ó/Á) buttons
Use these to select indexes on an audio CD or
directories on a data CD. Set the auto-cue function
to determine what happens after selection. (See
“Selecting indexes and directories” on page 22.)
q ª STOP button
Press to stop playback. If the incremental play function
is activated, press this button during playback to pause
at the beginning of the next track. (See “Incremental
play function on page 25.)
w CALL button
During playback or when paused, press this button
to return to the point where playback was last started
and pause. (See “Call function” on page 25.)
e EJECT button
Press this to open and close the disc tray.
r PLAY MODE button
Press this button to cycle through the playback modes.
Choose from ordinary, single, program and random.
Ordinary
playback
Single
playback
Program
playback
Random
playback
t KEY ORIG button
Turn the original key function, which changes the
speed without changing the pitch, on and off. (See
“Changing the playback speed without changing the
pitch (KEY ORIG)” on page 28.)
Wireless remote control (TASCAM RC-500)
TASCAM CD-6010 15
2 – Names and Functions of Parts
y INTRO CHECK button
When stopped, during playback or when paused,
press this button to activate intro check mode. When
in intro check mode, press the Á PLAY button to play
the first 10 seconds of each track in succession. (See
“Intro check mode on page 27.)
u REPEAT button
Press to turn the repeat playback function on and off.
(See “Repeat playback” on page 26.)
Press and hold for more than one second to turn the
A-B repeat function on. (See A-B repeat playback” on
page 26.)
i NEXT button
When in menu mode, press to select the next value
(menu item or setting value). (See “Menu operation
basics” on page 19.)
o PREV button
When in menu mode, press to select the previous
value (menu item or setting value). (See “Menu
operation basics on page 19.)
p PGM button
Press to open program setting mode. (See “Program
playback” on page 28.)
a CLEAR button
Press this button to cancel the input of a number
button.
Press and hold when the program menu is open to
clear the program.
NOTE
Unlike the CLEAR button on the main unit, the CLEAR
button on the wireless remote control cannot be
pressed and held while pressing a number button to
delete a cue point.
s SEARCH (Ô/) buttons
During playback or when paused, press the Ô
button to search backward, and press the button
to search forward. (See “Using the SEARCH buttons” on
page 23.)
When in program setting mode, use these to select the
program number. (See “Program playback” on page
28.)
d JOG (−/+) buttons
When paused, press a JOG (+ or ) button to enter jog
mode. Press the + button to advance one frame, and
press the button to go back one frame. (See “Using
the jog function to search on page 23.)
f π PAUSE button
Press during playback to pause.
When the auto-cue function is on, press when stopped
to pause at the instant when sound begins in track 1.
When the auto-cue function is off, press when stopped
to pause at the beginning of track 1.
g Á PLAY button
When stopped, press this button to start playback.
When paused, press this button to resume playback.
When the incremental play function is on, press this
button during playback to start playback of the next
track. When the incremental play function is off, press
this button during playback to use skip back playback.
16 TASCAM CD-6010
3 – Preparation
Making connections
The illustration below shows an example of connecting other equipment with a CD-6010.
Precautions before making connections
Before connecting other devices to the unit, read their manuals carefully.
Turn off the power (or put power into standby mode) for this unit and all equipment that will be connected to it.
Connect all the devices to the same power supply line. When using a power strip, for example, use a thick cable with a
high current capacity to minimize variation in the power voltage.
TASCAM RC-3F
Footswitch
(sold separately)
TASCAM RC-20
Direct Play Remote
(sold separately)
Headphones
External controller
Computer
USB
DIGITAL
IN
(COAXIAL)
Digital inputs of mixers,
recorders, ampliers, etc.
ANALOG
IN
(UNBALANCED)
Analog inputs of mixers,
recorders, ampliers, etc.
ANALOG IN
(BALANCED)
DIGITAL IN
(AES/EBU)
Connecting a footswitch
Connect a TASCAM RC-3F footswitch (sold separately) to
the REMOTE connector to enable it to control some unit
operations. (See “Controlling the player with a footswitch
on page 33.)
Connecting a direct play remote
Connect a TASCAM RC-20 direct play remote (sold
separately) to the REMOTE connector to enable it to
control some unit operations. (See “Controlling the player
with a direct play remote on page 34.)
Connecting headphones
Connect stereo headphones to the PHONES jack on the
front panel. Use the LEVEL knob to adjust the volume.
CAUTION
Before connecting headphones, turn the LEVEL knob to
minimize the volume. Failure to do so might cause sudden
loud noises, which could harm your hearing or result in other
trouble.
Connecting with a computer
Connect the RS-232C connector on this unit to a RS-232C
connector on a computer to allow serial control of this
unit from that computer.
After connecting the unit to a computer, make
transmission settings correctly on this unit. (See “Using
the RS-232C connector on page 34.)
TASCAM CD-6010 17
3 – Preparation
Connecting digital audio equipment
Connect the digital inputs of stereo amplifiers, mixers,
recorders and other digital equipment to this unit’s digital
output connectors.
Connecting analog audio equipment
Connect the analog inputs of stereo amplifiers, mixers,
recorders and other analog equipment to this unit’s
analog output connectors.
NOTE
Cables are not included with this unit.
Do not bundle RCA cables with power cords or speaker
cables. Doing so could noise or otherwise reduce sound
quality.
Using the parallel connector
To use an external controller for parallel control of
the unit, use the CONTROL I/O PARALLEL connector
(D-Sub 25-pin). For the pin assignments of the PARALLEL
connector, see “Using the parallel connector” on page 35.
Preparing the remote control
Inserting batteries
1 Open the cover on the back of the remote control.
2 Insert two AAA batteries with the correct ±
orientations.
3 Close the cover.
When to replace the batteries
Replace both batteries with new ones when the range
of the remote control becomes short or if the buttons
become unresponsive.
Precautions about using batteries
Misuse of batteries could cause them to leak, rupture or
otherwise be damaged. Please read and abide by the
precautions on the battery labels when using them. See
page 4 of this manual for additional precautions.
Precautions about using the remote
control
When using other devices controlled by infrared rays,
use of this remote control might operate these devices
by mistake.
Use the remote control within the following range.
Maximum operation distance
Directly in front: 7 meters
15° left or right: 7 meters
Remote sensor
Remote control reception
settings
Operation of the unit using the remote control can be
disabled in order to prevent misoperation.
Use the
15 IR
menu item to set whether or not the unit
can be operated by remote control (default value:
ON
).
NOTE
If remote control reception has been set to OFF, IR OFF
will appear on the display when any of the remote control
buttons are pushed.
The remote control reception setting (on/off) is saved
even if the unit’s power is turned off.
18 TASCAM CD-6010
3 – Preparation
Panel lock function
When in shift mode (when the SHIFT indicator is lit),
press and hold the DISPLAY [LOCK] button to turn the
panel lock function on or off. You can also turn it on/off by
pressing the DISPLAY [LOCK] button while pressing and
holding the SHIFT button.
When it is on, all the buttons on the front panel of the unit
(except the SHIFT and DISPLAY [LOCK] buttons) and the
remote control are disabled.
LOCKED
will appear on the
display if you push any of the buttons.
NOTE
Even when the panel lock function is enabled, the
unit can be controlled by a TASCAM RC-3F footswitch
connected to the REMOTE jack on the front panel and
external controllers connected to the RS-232C connector
and CONTROL I/O PARALLEL connectors on the rear
panel.
The panel lock setting (on/off) is saved even if the unit
power is turned off.
TASCAM CD-6010 19
4 – Menu
Use the unit’s menu system to make various settings.
Among the menu setting items are some that can also be
set using dedicated buttons on the remote control.
Menu structure
The menu structure of the unit includes the following
items.
Menu
number
Item Function set Reference
01 Origin
Original key Page 28
02 TRAY Tray lock Page 21
03 A_CUE
Auto-cue level Page 24
04 Prog Program Page 28
05
FADE Fade in/out playback Page 30
06
EOM_D DISC EOM time display Page 32
07
P onPL
Power on play Page 27
08 Mono
Mono output Page 33
09
RESUM
Resume Page 24
10 EOM_T TRACK EOM time display Page 32
11 Inc-P Incremental play Page 25
12 P-STEP Pitch control steps Page 28
13 232C Baud rate Page 34
14 S-BAC Skip back Page 30
15 IR Remote control reception Page 17
16 INTVAL
Silent interval between
tracks
Page 33
17 FRAM Frame time display Page 32
18 REMOT Footswitch mode Page 33
19 AT T Analog attenuation Page 35
20 RESET
Restore unit to factory
defaults
Page 34
21 INFO View the firmware version Page 35
22 D-OUT Digital output format Page 35
Menu operation basics
The basic procedures for making settings using the menu
system are as follows.
1 When the display shows the usual playback
information, press the MENU button on the unit or
the included TASCAM RC-500 remote control.
The center area of the display shows the menu item
selected. The menu item that was selected the last
time that the unit was in menu mode appears.
2 Use the unit’s front panel buttons or the remote
control to conduct the following operation to select
the desired menu item.
When using the front panel buttons:
Turn the
TRACK SKIP/DATA knob or use the number buttons
to select the menu item, and press the TRACK SKIP/
DATA knob to confirm.
When using the remote control:
Use the PREV
and NEXT buttons, as well as the number buttons to
select the menu item, and press the ENTER button
to confirm.
NOTE
The menu item number blinks before it has been
confirmed.
When using the number buttons input two digits to select
menu items. For example, to select menu number 06,
press the 0 button followed by the 6 button.
The following step (3) applies to all items except
04 PROG
,
20 RESET
and
21 INFO
. See their
explanations for instructions about how to use these
items.
3 Select the desired value.
When using the front panel buttons:
Turn the
TRACK SKIP/DATA knob to select the value and
press the TRACK SKIP/DATA knob to confirm the
setting.
When using the remote control:
Use the PREV
and NEXT buttons to select the value and press the
ENTER button to confirm the setting.
NOTE
When a value different from the active setting is selected,
the value blinks. After the new setting is confirmed, menu
item selection mode appears again.
To cancel a setting change, press the MENU button on the
unit or the remote control.
4 Repeat steps 2–3 again as necessary.
5 To exit menu mode, press the MENU button on the
unit or the remote control.
20 TASCAM CD-6010
5 – Operation
Compatible disc and file types
This unit can play the following types of discs and files.
CD-DA format discs (audio CDs)
This unit can play commercially-available music CDs and
CD-R discs that have been recorded in audio CD format.
These types of discs are called “audio CDs in this manual.
This unit cannot play unfinalized CD-R discs.
CD-ROM format discs (data CDs)
This unit can play discs that have MP3 and WAV files and
use ISO 9660 Level 1, Level 2 or Joliet file system formats.
These types of discs are called data CDs” in this manual.
NOTE
This unit can play back MP3 files that have sampling
frequencies of 32, 44.1 and 48 kHz and have bit-rates of
32–320 kbps or are variable bit-rate (VBR).
This unit can play back WAV files that have sampling
frequencies of 32 kHz/44.1 kHz/48 kHz and are 16-bit.
When playing back MP3 or WAV files, the sampling
frequency of this unit’s digital outputs is 44.1 kHz. When
the pitch control function is enabled, output is also
digital, and some devices might not be able to receive
digital output from this unit.
This unit uses the “.mp3” file extension to recognize MP3
files. Always add the “.mp3” extension to MP3 file names.
The player cannot play back MP3 files that do not have
the “.mp3” extension. In addition to having the “.mp3”
extension, the file must also be in the proper MP3 data
format to allow playback by this unit.
This unit uses the “.wav” file extension to recognize WAV
files. Always add the “.wav” extension to WAV file names.
The player cannot play back WAV files that do not have
the “.wav” extension. In addition to having the “.wav”
extension, the file must also be in the proper WAV data
format to allow playback by this unit.
Discs that contain more than 1000 files or 255 directories
might not play back correctly.
Depending on the condition of a disc, this unit might not
be able to play it back, or skipping might occur.
Directories and tracks on
data CDs
This unit treats all the audio (WAV and MP3) files on data
CDs as “tracks. Some data CDs store files inside directories
(folders) in the same way that ordinary computers do. In
addition, directories can be stored inside other directories
creating a multilevel structure.
This unit assigns a directory number to each directory
to manage them. Directory numbers are assigned
sequentially starting with the directories at the highest
level followed by the directories (subfolders) inside them.
If the root directory of a data CD contains one or more
audio files, it will be numbered as the first directory.
Each audio file is also assigned a track number. Track
numbers are assigned in order starting from those in the
lowest numbered directory.
During ordinary playback of data CDs, tracks are played
back in the assigned numerical order just like those on an
audio CD.
Directories that do not directly contain audio files are not
given numbers. For example, in the illustration below the
directory that contains Directory 5 is not given a number.
(DIR 1)
: Directory (Folder)
: MP3/WAV le
An example of data CD structure
TASCAM CD-6010 21
5 – Operation
Loading discs
Inserting a disc
To load a CD, press the OPEN/CLOSE button on the unit
or the EJECT button on the remote control to open the
disc tray. Load the disc with its label side up.
Press the OPEN/CLOSE button or the EJECT button again
to close the disc tray.
After a disc is loaded, the player will read its information. If
it is an audio CD, the display will show the total number of
tracks and total playback time. If it is a data CD, the display
will show the total number of tracks in the current folder.
NOTE
You can also press the Á [PLAY] button to close the disc
tray and start playback immediately instead of pressing the
OPEN/CLOSE button or the EJECT button again to close the
disc tray.
Ejecting a disc
Press the OPEN/CLOSE button on the player or EJECT
button on the remote .
Remove the disc after the tray opens.
NOTE
In order to reduce the disc ejection time, the tray opens
before the disc stops spinning completely.
The OPEN/CLOSE button functions when the power is ON.
If you must remove a disc when the power is OFF, insert
a paperclip or similar stiff rod into the hole beneath the
tray and push to open the tray.
Tray lock function
The tray lock function allows you to disable the operation
of the OPEN/CLOSE button on the player during playback
and when paused in order to prevent playback from being
interrupted if this button is pressed accidentally.
To turn the tray lock function on, set the
02 TRAY
menu
item to
LOK
(default value:
OFF
).
NOTE
The tray lock function on/off setting is maintained even
when the player’s power is turned off.
Playing back a CD
The following procedures assume that the necessary
connections have been completed, the players power has
been turned on and a CD (audio or data) has been loaded.
To start playback, press the Á [PLAY] button on the
player or the Á PLAY button on the remote.
Stopping playback
Press the ª STOP [INTRO CHECK] button on the player
or the ª STOP button on the remote.
Pausing playback
Press the π [PAUSE] button on the player or the π PAUSE
button on the remote.
To restart playback, press the Á [PLAY] button on the
player or the Á PLAY button on the remote.
NOTE
In this manual, unless stated otherwise, explanations assume
that continuous playback mode is enabled. (See “Playback
modes” on page 23.)
22 TASCAM CD-6010
5 – Operation
Selecting a track
You can move (skip) to the previous or next track, or you
can select a track directly by its track number.
Skipping to the next or previous track
Turn the TRACK SKIP/DATA Â/¯ [INDEX/DIR
SEARCH] knob on the player or press the SKIP Â/¯
buttons on the remote to select a track. What happens
after you use SKIP buttons to select a track depends on
whether the auto-cue function is on or off. (See Auto-cue
function” on page 24.)
When stopped
If the auto-cue function is off, after a track is selected,
playback pauses at the beginning of that track. After this,
press the
Á
[PLAY] button on the unit or the
Á
PLAY
button on the remote to start playback.
If the auto-cue function is on, playback pauses at the
instant when sound begins in the track. To start playback
after this, press the Á [PLAY] button on the player or the
Á PLAY button on the remote.
During playback
The selected track will start playing back.
When paused
If the auto-cue function is off, playback pauses at the
beginning of the selected track.
If the auto-cue function is on, playback pauses at the
instant when sound begins in the track.
NOTE
If you press the  button once during playback or when
paused, playback will skip to the beginning of the current
track. However, if playback is one second or less from the
beginning of the current track, pressing the  button will
skip to the previous track.
Designating track numbers
Use the number buttons on the player or the remote to
directly designate track numbers.
With audio CDs
ª
Enter two digits. For example, if the track number is “9”,
enter “0” followed by “9”.
With data CDs
ª
Enter three digits. For example, if the track number is “105”,
enter “1”, “0” and then “5”. If the track number is “4”, enter “0”,
“0” and then “4”.
When stopped, use the number buttons to designate a
track number and,
If the auto-cue function is off, pause at the beginning
of the designated track. After this, press the
Á
[PLAY]
button on the unit or the
Á
PLAY button on the
remote to start playback.
If the auto-cue function is on, pause playback at the
instant when sound begins in that track.
During playback, use the number buttons to designate
a track number and start playback of that track.
When paused, use the number buttons to designate a
track number and,
If the auto-cue function is off, pause playback at the
beginning of that track.
If the auto-cue function is on, pause playback at the
instant when sound begins in that track.
Selecting indexes and directories
You can select track indexes on audio CDs and directories
on data CDs.
NOTE
Audio CD indexes are divisions within tracks. In other
words, they are units that are smaller than tracks.
Data CD directories are folders that contain MP3 and
WAV files (tracks). In other words, they are units that are
larger than tracks.
Use the following procedures to select indexes and
directories.
Using the front panel buttons:
When in shift mode (SHIFT indicator lit) use the TRACK
SKIP/DATA Â/¯ [INDEX/DIR SEARCH] knob to
select them. You can also do this by pressing the TRACK
SKIP/DATA Â/¯ [INDEX/DIR SEARCH] knob while
pressing and holding the SHIFT button.
Using the remote control:
Use the INDEX/DIR SEARCH Ó/Á buttons to select
them.
When a data CD directory is selected, the first track inside
that directory will automatically start playing back (unless
the auto-cue function is on, in which case it will pause at
the instant when sound first begins in the first track).
When an audio CD index is selected, playback of the track
from the selected index will begin (unless the auto-cue
function is on, in which case it will pause at the instant
sound first begins in the designated index).
TASCAM CD-6010 23
5 – Operation
Using the SEARCH buttons
You can search forward and backward in a track while
listening to it.
1 Play or pause the desired track.
2 Press and hold a SEARCH Ô/ [AUTO CUE/
AUTO READY] button on the player or a SEARCH
Ô/ button on the remote to start searching
forward or backward.
3 Release the button that you are holding to stop
searching and return the player to the state it was in
before searching (playback or pause).
NOTE
The search function cannot be used with data CDs.
Using the jog function to search
You can use the jog function to search a track one frame
at a time. However, this function cannot be used with data
CDs.
Using the front panel buttons:
When paused, press the JOG button to enter jog mode,
and turn the TRACK SKIP/DATA knob to search the track
one frame at a time.
Using the remote control:
When paused, press a JOG (+/–) button to enter jog mode.
Press the + button to advance one frame, and press the
button to go back one frame.
NOTE
In jog mode, if you stop searching, playback will pause, but
the sound at the current position will be output continuously.
Playback modes
This unit has 4 playback modes.
The current playback mode is indicated on the display.
Continuous playback mode (default)
ª
Nothing appears in the playback mode indication area at
the top of the display.
The tracks on the disc are played back in numerical order.
Single playback mode
ª
S
appears in the playback mode indication area at the top
of the display.
The selected track is played back once and then playback
stops.
Program playback mode
ª
PGM
appears in the playback mode indication area at the
top of the display.
Tracks are played back in the order programed in advance.
(See “Program playback” on page 28.)
Random playback mode
ª
RANDOM
appears in the playback mode indication area at
the top of the display.
Tracks on the disc are played back in random order.
Selecting the playback mode
Use the following procedures to set the desired playback
mode using the controls on the player or the included
TASCAM RC-500 remote control.
Using the front panel buttons:
Press the PLAY MODE [REPEAT] button to cycle through
the playback modes.
Using the remote control:
Press the PLAY MODE button to cycle through the
playback modes.
Ordinary
playback
Single
playback
Program
playback
Random
playback
NOTE
Playback mode settings are retained even when the power is
turned off.
24 TASCAM CD-6010
6 – Various Playback Functions
This chapter explains the various playback functions of
the unit.
Auto-cue function
If the auto-cue function is on and you select a track to
play, any silence at the beginning of the track will be
skipped, and the player will pause at the instant when a
sound signal is first detected. This means that sound can
be heard immediately when playback starts.
NOTE
When the flash start function is used for playback, the
auto-cue function is disabled.
If the auto-cue function is on and a track is selected
during playback, that track will play back from the
instant that sound begins in the selected track. If the
auto-cue function is on and a track is selected when
paused, the player will pause at the instant that sound
begins in the selected track.
Moreover, you can set the audio signal detection
threshold level (auto-cue level) that is used by the auto-
cue function. Any signal higher than the set auto cue level
will be recognized as sound, and any signal lower than
this level will be treated as silence.
The following procedure describes how to use the menu
to turn the auto-cue function on/off and adjust the auto-
cue level setting. (For details about using the menu
screen, refer to the “Menu operation basics” on page 19.)
Turning the auto-cue function on/off
ª
Using the front panel buttons:
When in shift mode (SHIFT indicator lit), press the
SEARCH Ô [AUTO CUE] button to turn it on/off. You
can also do this by pressing the SEARCH Ô [AUTO
CUE] button while pressing and holding the SHIFT
button.
Using the remote control:
Press the A.CUE/DEL button to turn it on/off.
When the auto-cue function is on,
A.CUE
appears in the
lower part of the display.
NOTE
The auto-cue function on/off setting is retained even when
the power is turned off.
Setting the auto-cue level
To set the auto-cue function trigger level (auto-cue level),
use the
03 A-CUE
menu item.
Options:
24
(default value),
30
,
36
,
42
,
48
,
54
,
60
,
66
,
72
These values represent auto-cue levels in dB. The point
when the signal level of the selected track first exceeds
the auto-cue level is recognized as the instant when
sound starts.
NOTE
The auto-cue level setting is retained even when the power is
turned off.
Auto-ready function
If auto-ready is on, after a track has finished playing,
playback will pause at the beginning of the next track.
NOTE
If the auto-cue function is also on, playback will pause
at the instant when sound starts rather than at the
beginning of the track.
When using the flash start function for playback, the
auto-ready function is disabled.
Turning the auto-ready function on/off
ª
Using the front panel buttons:
When in shift mode (SHIFT indicator lit), press the
SEARCH [AUTO READY] button to turn it on/off.
You can also do this by pressing SEARCH [AUTO
READY] while pressing and holding the SHIFT button.
Using the remote control:
Press the A.RDY/INS button to turn it on/off.
When the auto-ready function is on,
A.RDY
appears in
the lower part of the display.
NOTE
The auto-ready function on/off setting is retained even when
the power is turned off.
Resume function
When the resume function is on, the position where
playback stops is memorized. When playback is started
again playback resumes from that position. When this
function is used with a data CD, however, playback
resumes from the beginning of the track that was playing
when playback was stopped.
To turn the resume function on/off, use the
09 RESUM
menu item (default value:
OFF
).
When the resume function is on,
RESUME
appears in the
lower part of the display.
NOTE
The resume function on/off setting is retained even when the
power is turned off.
TASCAM CD-6010 25
6 – Various Playback Functions
Call function
During playback or when paused, press the CALL [PLAY
MODE] button on the player or the CALL button on the
remote to locate to the point when playback last started
and pause playback. However, when this function is used
with a data CD, playback pauses at the beginning of the
track that was playing when playback was last started.
Cue function
You can use the cue function to store in memory up to 20
time points on an audio CD to recall them when desired.
Press the CUE button on the front panel to use the cue
function. When active, the CUE indicator lights.
NOTE
The cue function does not work with data CDs.
When the cue indicator is lit, the number buttons on the
unit and the remote control are used by the cue function
and cannot be used to designate track numbers or to
flash start tracks. To use these functions, push the CUE
button to turn the CUE indicator off.
Cue points are retained even when the power is turned
off.
Setting cue points
During playback or when paused, after putting the unit in
shift mode (SHIFT indicator lit), press a number button on
the unit or remote control to set a cue point at the current
playback time. Press the +10 button to use the buttons to
set points 11–20 when the indicator is lit.
The indicators light for number buttons that have cue
points set.
NOTE
You can also set points by pressing a number button while
pressing and holding the SHIFT button.
Using cue points
When shift mode is disabled (SHIFT indicator unlit) and
a cue point is assigned (number indicator lit), press the
corresponding number button to jump to that cue point
and pause.
If the FLASH indicator is lit, pressing a number button
with a set cue point will start playback from that point
immediately. (See "Flash start function" on page 30.)
Clearing cue points
To clear a cue point, press the corresponding number
button (indicator lit) while pressing the CLEAR button.
After a cue point has been cleared the indicator will
become unlit.
Incremental play function
When the incremental play function is on, pressing the Á
PLAY button on the unit or the remote during playback
will start playback from the beginning of the next track,
and pressing the ª STOP [INTRO CHECK] button on the
player or the ª STOP button on the remote will pause
playback at the beginning of the next track.
NOTE
When the incremental play function is on and playback
is paused, pressing the Á PLAY button on the unit or the
remote will start playback from that point, and pressing
the ª STOP [INTRO CHECK] button on the player or the
ª STOP button on the remote stops playback.
During playback of the last track, if you press the
Á PLAY
button on the unit or the remote, playback of the first
track will start. If you press the ª STOP [INTRO CHECK]
button on the player or the ª STOP button on the remote,
playback will pause at the beginning of the first track.
Setting the control I/O parallel connector pin 2 (PLAY IN)
or 3 (STOP IN) to ON has the same effect.
Receiving a stop command from the control I/O parallel
connector pin 8 (FADER START/STOP) has the same effect.
To turn the incremental play function on/off, use the
11
Inc-P
menu item (default value:
OFF
).
When the incremental play function is on,
INCR
appears
in the lower part of the display.
NOTE
The incremental play function on/off setting is retained even
when the power is turned off.
26 TASCAM CD-6010
6 – Various Playback Functions
Repeat playback
You can repeatedly play back all tracks or repeatedly
play back a specified region within a track (A-B repeat
playback).
Ordinary repeat playback
When the repeat playback function is on, behavior
depends on the playback mode.
All track playback (ordinary playback) mode: the entire
disc is played back repeatedly
Single track playback mode: the current track is played
back repeatedly
Program playback mode: all the tracks in the program
are played back repeatedly
Random playback mode: all the tracks on the disc are
played back at random repeatedly
Use one of the following procedures to turn the repeat
playback function on.
Using the front panel buttons:
When in shift mode (SHIFT indicator lit), press the PLAY
MODE [REPEAT] button.
REPEAT
appears of the top of
the display when repeat mode is activated. You can also
do this by pressing the PLAY MODE [REPEAT] button
while pressing and holding the SHIFT button.
Using the remote control:
Press the remote REPEAT button.
REPEAT
appears of
the top of the display when repeat mode is activated.
Use one of the following procedures to turn the repeat
playback function off.
When the player is in shift mode (
SHIFT indicator lit),
press the PLAY MODE [REPEAT] button again until
REPEAT
disappears from the top of the screen. You
can also do this by pressing the PLAY MODE [REPEAT]
button while pressing and holding the SHIFT button.
Press the
REPEAT button on the remote until
REPEAT
disappears from the top of the screen.
NOTE
The repeat playback setting is retained even when the power
is turned off.
A-B repeat playback
You can specify a desired interval (A-B) within a track to be
played back repeatedly. Use the following procedures to
enable A-B repeat playback.
1 During playback or when paused, when the player is
in shift mode (SHIFT indicator lit), press and hold the
PLAY MODE [REPEAT] button on the player, or press
and hold the PLAY MODE [REPEAT] button while
pressing the SHIFT button, or press and hold the
REPEAT button on the remote to activate A-B repeat
mode.
REPEAT
will blink at the top of the display.
2 Press the TRACK SKIP/DATA knob on the player or
the REPEAT button on the remote at the beginning
of the interval that you want to repeat (A point).
A-B
will blink at the top of the display.
3 Once again, press the TRACK SKIP/DATA knob on the
player or the REPEAT button on the remote at the
end of the interval that you want to repeat (B point).
Repeat playback between the A and B points will
begin, and
A-B
will stop blinking and continue to
appear at the top of the display.
4 To end A-B repeat playback, press the ª STOP [INTRO
CHECK] button on the player or the ª STOP button
on the remote.
NOTE
A-B repeat playback cannot be used with a data CD.
Once playback reaches the B point, playback will restart
from the A point.
A-B repeat playback across more than one track is not
possible.
TASCAM CD-6010 27
6 – Various Playback Functions
Intro check mode
The Intro Check mode allows 10-second track beginnings
to be played in succession. Use the following procedures
to enable this mode.
Using the front panel buttons:
1 When stopped and in shift mode (SHIFT indicator
lit), press the ª STOP [INTRO CHECK] button. You
can also do this by pressing the STOP [INTRO CHECK]
button while pressing and holding the SHIFT button.
INT
appears on the right side of the display.
MS
F
Appears
NOTE
Intro check mode cannot be enabled together with single
playback mode or random playback mode.
2 Press the Á [PLAY] [REPEAT] button to activate the
intro check mode starting from the next track.
3 Press the ª STOP [INTRO CHECK] button again to
stop the play and disable intro check mode.
Using the remote control:
1 When stopped or paused, press the remote INTRO
CHECK button to enable intro check mode.
INT
appears on the right side of the display.
MS
F
Appears
NOTE
If you press the INTRO CHECK button on the remote control
during playback,
INT
appears on the right side of the
display and intro check starts immediately.
2 If stopped or paused, press the Á PLAY button to
start intro check.
3 Press the ª STOP button to stop playback and
disable intro check mode.
Press the INTRO CHECK button again to disable intro
check mode and continue playback.
Power on play function
By using a commercially-available external timer, you
can make the player turn on at desired times and start
playback.
1 First, connect the power of this unit so that it
receives power from the timer.
2 Load the disc that you want played back.
3 Set the
07 P onPL
menu item to
ON
(default
value:
OFF
).
4 Leave the POWER switch of this unit set to ON, turn
the power off from the timer and set the timer to
turn on at the desired time. At the set time, the timer
should supply power to the player, turning it on, and
playback should begin automatically.
NOTE
The power on play function on/off setting is retained even
when the power is turned off.
Pitch control playback
Using its pitch control playback function, this unit can
vary the pitch (and speed) of playback.
Follow these procedures to use pitch control playback.
When this function is on,
PITCH
and the setting value
appear in the PITCH display area on the right side of the
display.
MS
F
Current value
Using the front panel buttons:
When in shift mode (SHIFT indicator lit), press the JOG
[PITCH] button to turn the pitch control function ON. You
can also do this by pressing the JOG [PITCH] button while
pressing and holding the SHIFT button.
After pressing the SHIFT button, press the MENU [PITCH
%] button to enter pitch setting mode and use the
TRACK SKIP/DATA knob to adjust the setting in the range
between −16% and +16%. The pitch setting value blinks
while it is being set. You can also enter pitch setting mode
by pressing the MENU [PITCH%] button while pressing
and holding the SHIFT button.
After making the setting, press the SHIFT button and
then the MENU [PITCH%] button to exit pitch setting
mode. You can also exit pitch setting mode by pressing
the MENU [PITCH%] button while pressing and holding
the SHIFT button.
28 TASCAM CD-6010
6 – Various Playback Functions
Using the remote control:
Press the PITCH button to turn the pitch control function
on. Use the + and buttons to adjust the setting in the
range between −16% and +16%.
Setting the pitch adjustment
increment
To set the adjustment increment for pitch control
playback (pitch step) use the
12 P-STEP
menu item.
Options (%):
0 .1
(default value),
0.5
,
1.0
NOTE
The pitch step setting is retained even when the power is
turned off.
Changing playback speed
without changing pitch
(KEY ORIG)
Ordinarily, when using the pitch control function, the
speed changes along with the pitch. When the original
key function is on, however, the pitch does not change
even when the playback speed is changed.
Use one of the following procedures to turn the original
key function on/off.
Press the
KEY ORIG button on the remote.
Use the
01 Origin
menu item (default value:
OFF
).
When the original key function is on,
KEY ORIG
appears
at the bottom of the display.
NOTE
The original key function on/off setting is retained even when
the power is turned off.
Program playback
By setting a program in advance, you can set the unit to
play tracks in the order that you want. Up to 100 tracks
can be added to the program. To use program playback
to play tracks in the program order, set the playback
mode to program playback mode and start playback. (See
“Selecting the playback mode” on page 23.)
Program setting mode
Use the following procedures to enter program setting
mode and add tracks to the empty program.
NOTE
You can add tracks to the program regardless of the
current playback mode.
You can add the same track to the program multiple
times.
The program setting is retained even when the power is
turned off or the disc is ejected. The player can remember
one program for up to 100 discs.
Using the front panel buttons:
1 When playback is stopped, select the
04 Prog
menu item, and press the TRACK SKIP/DATA knob to
enter program setting mode. The display appears as
follows.
Track number
Program number
2 Use the number buttons or TRACK SKIP/DATA knob
to select the number of the track that you want to
add at the currently displayed program number. The
selected track number blinks.
3 Press the SEARCH [AUTO READY] button to
add the selected track. The next program number is
shown.
4 Repeat steps 2 and 3 to add tracks as desired.
NOTE
After selecting a track, turning the TRACK SKIP/DATA knob to
the right or pressing the SEARCH [AUTO READY] button
adds the track to the program. If you exit program setting
mode without doing this, the track selected just before will
not be added to the program.
5 When you are done adding tracks to the program,
press the TRACK SKIP/DATA knob to exit program
setting mode.
Using the remote control:
1 When stopped, press the PGM button to enter
program setting mode. The display appears as
follows.
Track number
Program number
TASCAM CD-6010 29
6 – Various Playback Functions
2 Use the number buttons or SKIP Â/¯ buttons
to select the number of the track that you want to
add at the currently displayed program number. The
selected track number blinks.
3 Press the SEARCH button to add the selected
track. The next program number is shown.
4 Repeat steps 2 and 3 to add tracks as desired.
NOTE
After selecting a track, pressing the SEARCH button
adds the track to the program. If you exit program setting
mode without doing this, the track selected just before will
not be added to the program.
5 When you are done adding to the program, press
the PGM button to exit the program setting mode.
Checking the program
When playback is stopped, follow step 1 of “Program
setting mode above to enter program setting mode and
then follow the procedures below.
Using the front panel buttons:
Use the SEARCH Ô/ [AUTO CUE/AUTO READY]
buttons to select a program number to confirm the track
that it contains. The track number is shown to the right of
the program number.
Using the remote control:
Use the SEARCH Ô/ buttons to select a program
number to confirm the track that it contains. The track
number is shown to the right of the program number.
Editing the program
You can change the contents of the program.
When playback is stopped, follow step 1 of “Program
setting mode above to enter program setting mode and
then follow the procedures below.
Changing program tracks
ª
Using the front panel buttons:
1 Use the SEARCH Ô/ [AUTO CUE/AUTO READY]
buttons to select the program number that you want
to change.
2 Use the number buttons or TRACK SKIP/DATA knob
to select the desired track.
3 Press the SEARCH [AUTO READY] button to
confirm the change.
Using the remote control:
1 Use the SEARCH Ô/ buttons to select the
program number that you want to change.
2 Use the number buttons or SKIP Â/¯ buttons
to select the desired track.
3 Press the SEARCH button to confirm the
change.
Inserting tracks into the program
ª
Using the front panel buttons:
1 Use the SEARCH Ô/ [AUTO CUE/AUTO READY]
buttons to select the program number where you
want to insert a track.
2 Press the SEARCH [AUTO READY] button while
pressing and holding the SHIFT button.
3 Use the number buttons or the TRACK SKIP/DATA
knob to select the track that you want to insert.
4 Press the SEARCH [AUTO READY] button to
insert the track.
Using the remote control:
1 Use the SEARCH Ô/ buttons to select the
program number where you want to insert a track.
2 Press the A.RDY/INS button.
3 Use the number buttons or SKIP Â/¯ buttons
to select the track that you want to insert.
4 Press the SEARCH button to insert the track.
Removing tracks from the program
ª
Using the front panel buttons:
1 Use the SEARCH Ô/ [AUTO CUE/AUTO READY]
buttons to select the program number of the track
that you want to delete.
2 Press the SEARCH Ô [AUTO CUE] button while
pressing and holding the SHIFT button to remove
the track from the program.
Using the remote control:
1 Use the SEARCH Ô/ buttons to select the
program number of the track that you want to
delete.
2 Press the A.CUE/DEL button to delete the track from
the program.
After editing the program
ª
Press the remote PGM button or the TRACK SKIP/
DATA knob on the player to exit program setting
mode.
Removing all tracks from the program
ª
When in program setting mode, press and hold the
CLEAR button on the player or the remote CLEAR
button to remove all tracks from the program.
30 TASCAM CD-6010
6 – Various Playback Functions
Fade in/fade out playback
The player can be set to fade in at the beginning of
playback and fade out when playback is stopped or
paused. The fade in and fade out times, which determine
how many seconds fading in and fading out takes, can
be set independently. Use the
05 FADE
menu item to
make fade in and fade out settings. The use of this menu
item differs slightly from the others. Use the following
procedures with this item.
1 Select the
05 FADE
menu item.
Press the TRACK SKIP/DATA knob to enter fade in/
out setting mode. The screen appears as follows.
2 Press the TRACK SKIP/DATA knob or the remote
ENTER button to enter fade in setting mode.
3 Turn the TRACK SKIP/DATA knob on the player or use
the PREV and NEXT buttons on the remote to set the
fade in time. The fade in time can be set between 0.5
and 10 seconds in 0.5-second increments (default
value:
OFF
).
4 Press the TRACK SKIP/DATA knob on the player or
the ENTER button on the remote to confirm the fade
in setting and enter fade out setting mode.
5 Turn the TRACK SKIP/DATA knob on the player or use
the PREV and NEXT buttons on the remote to set the
fade out time. The fade out time can be set between
0.5 and 10 seconds in 0.5-second increments (default
value:
OFF
).
6 Press the TRACK SKIP/DATA knob on the player or
the ENTER button on the remote to confirm the fade
out setting and exit menu mode.
The display returns to its usual appearance.
NOTE
FADE
appears at the bottom of the display whenever
fade in or fade out is set.
To set only the fade out time, in fade in/out setting mode
step 1 above, turn the TRACK SKIP/DATA knob on the
player (or press the PREV or NEXT button on the remote)
until OUT blinks. Then, press the TRACK SKIP/DATA knob
on the player (or the ENTER button on the remote) to
enter fade out setting mode.
To set only the fade in time, after step 4 above, press the
MENU button on the unit or on the remote to complete
the setting.
The fade in/out function settings are retained even when
the power is turned off.
Skip back playback
During playback, you can skip back by a preset amount of
time and continue playback.
During playback, press the Á [PLAY] button on the unit
or the remote control.
Setting the skip back time
To set the skip back time, use the
14 S-BAC
menu item.
Options: 0–60 seconds (0.5-second increments, default
value: 3 seconds)
NOTE
When the incremental play function is on, it receives
priority and skip back playback is disabled when you
press the Á PLAY button on the remote. Turn the
incremental play function off if you want to use this
function.
Skip back playback is only possible with audio CDs. Skip
back playback is not possible with data CDs.
Skip back playback settings are retained even when the
power is turned off.
Flash start function
Up to twenty track beginnings or cue points can be
pre-loaded into memory, enabling their playback to be
triggered instantly.
Flash-loading tracks:
ª
When tracks have been added to the program and the
unit is in playback mode or program playback mode, the
beginnings of the first 20 tracks in the program will be
loaded into memory.
When no tracks have been added to the program, the
beginnings of the first 20 tracks on the disc will be loaded
into memory.
TASCAM CD-6010 31
6 – Various Playback Functions
Flash-loading cue points:
ª
Set cue points are loaded into memory.
NOTE
The flash start function is only possible with audio CDs.
The flash start function is not possible with data CDs.
When playing back using the flash start function, the
auto-cue and auto-ready functions are disabled.
Using the front panel buttons:
1 To use a program to flash start tracks, program the
tracks in advance and set the playback mode to
program playback. To flash start using cue points,
set the cue points in advance and turn the cue mode
ON (CUE indicator appears).
2 Press the FLASH button.
3 While the beginnings of the tracks or cue points are
being loaded into memory, the word
FLASH
blinks
on the display. After loading completes,
FLASH
01-10
appears on the display, the FLASH indicator
lights and the Á PLAY indicator blinks.
4 Press the number button for the program number
(when program set), track number (when program
not set) or cue number (for cue point flash start) that
you want to play.
To select numbers between 11 and 20, press the
+10 button, so that
FLASH 11-20
appears on the
display, and then press the corresponding number
button. Press the +10 button again to return to
FLASH 1-10
.
Using the remote control:
1 To use a program to flash start tracks, program the
tracks in advance and set the playback mode to
program playback. To flash start using cue points,
set the cue points in advance and turn the cue mode
ON (CUE indicator appears).
2 Press the FLASH button.
3 While the beginnings of the tracks are being loaded
into memory, the word
FLASH
blinks on the display.
After loading completes,
FLASH 01-10
appears
on the display, the FLASH indicator lights and the Á
PLAY indicator blinks.
4 Press the number button for the program number
(when program set), track number (when program
not set) or cue number (for cue point flash start) that
you want to play.
To select numbers between 11 and 20, press the
CLEAR button, so that
FLASH 11-20
appears
on the display, and then press the corresponding
number button. Press the CLEAR button again to
return to
FLASH 1-10
.
Exiting flash start mode
ª
Press the FLASH button on the unit or the remote
control. The FLASH indicator will become unlit.
Relay playback
Multiple CD-6010 units can be used together and set
so that when playback ends on one unit, playback can
automatically start on another unit.
To do this, connect the CONTROL I/O PARALLEL
connector "23 EOM DISC TALLY" pin on the rear panel
of one unit to the CONTROL I/O PARALLEL connector
"2 PLAY" pin on another unit with a cable and set
DIS C
EOM
to
0
on both units. (See "End of disc warning (DISC
EOM)" on page 32.)
By connecting two CD-6010 units in both directions as
shown in illustration below, alternating playback between
them is possible.
By connecting three or more CD-6010 units in sequence
(CONTROL I/O PARALLEL "2 PLAY" to CONTROL I/O
PARALLEL "EOM DISC TALLY") as shown below, automatic
playback of one unit after the other is possible.
32 TASCAM CD-6010
7 – Other Functions
Changing the playback time
display mode
You can select the playback time that is shown on the
display.
During playback or when paused, press the DISPLAY
[LOCK] button on the player or the DISPLAY button on
the remote. Each press of the button cycles through the
three types of time display. The currently selected display
mode is shown in the playback time mode display area.
T.REMAIN
: total remaining time is displayed
REMAIN
: remaining time of the current track is
displayed
Nothing: elapsed time of the current track is displayed
NOTE
When an audio CD is stopped, the total recording time is
always shown regardless of whether or not T.REMAIN or
REMAIN appears.
For data CDs, neither the total time when stopped,
nor the remaining time or total remaining time during
playback are shown. (Only the number of tracks or track
number appears.)
In program playback mode, remaining time shows
the time until playback of the program ends. In single
playback mode, remaining time shows the remaining
time in the track.
In program playback mode, the total time shown is for
the program.
The playback time display mode setting is retained even
when the power is turned off.
Frame time display setting
You can set whether or not the frame time is shown
during playback. To set the frame time display, use the
17
FRAM
menu item (default value:
ON
).
NOTE
The frame time display on/off setting is retained even when
the power is turned off.
End of track warning
(TRACK EOM)
When nearing the end of a track, an end of track warning
indication can be shown on the display and a “21 EOM
TRACK TALLY" signal can be output from the CONTROL I/
O PARALLEL connector. With data CDs, an end of track
warning will not appear on the display. The CONTROL I/O
PARALLEL “21 EOM TRACK TALLY" signal will be output as
a pulse when the file playback ends.
By setting in advance the number of seconds before
the track end that the warning is shown, when playback
reaches that point, the
:
in the time display will begin
blinking. At the same time the CONTROL I/O PARALLEL
“21 EOM TRACK TALLY" signal will be output.
MS
F
Use the
10 EOM_T
menu item to set the value from
among the following options.
Options:
OFF
,
0
,
5
,
10
,
15
,
20
,
25
,
30
(default value),
35
For values other than
OFF
, the number indicates the
number of seconds before the end of the track that the
warning begins. However, when set to
0
, no warning will
be shown on the display when track playback ends, but
a “21 EOM TRACK TALLY" signal will be output from the
CONTROL I/O PARALLEL connector as a pulse.
At the default value, 30 seconds before the end of the
track, the
:
begins to blink and the CONTROL I/O
PARALLEL “21 EOM TRACK TALLY” signal is output
NOTE
The TRACK EOM function setting is retained even when the
power is turned off.
End of disc warning (Disc EOM)
You can set the unit to output a “23 EOM DISC TALLY"
signal from the CONTROL I/O PARALLEL connector when
nearing the end of a disc a few seconds before it ends.
Use the
06 EOM_D
menu item to set the time of the
EOM function.
Options:
OFF
,
0
,
5
,
10
,
15
,
20
,
25
,
30
(default value),
35
For values other than
OFF
, the number indicates the
number of seconds before the end of the disc that the
warning begins. When set to
0
, a “23 EOM DISC TALLY"
signal will be output from the CONTROL I/O PARALLEL
connector as a pulse when disc playback stops.
NOTE
The DISC EOM function setting is retained even when the
power is turned off.
TASCAM CD-6010 33
7 – Other Functions
Interval time setting
The player can be set to wait for a specified time (interval
time) after completing playback of one track before
starting playback of the next track.
To make the interval time setting, use the
16 INTVAL
menu item.
1 Select the
16 INTVAL
menu item.
2 Press the TRACK SKIP/DATA knob to enter interval
time setting mode. The screen appears as follows.
3 Turn the TRACK SKIP/DATA knob to set the interval
time, and press the TRACK SKIP/DATA knob to
confirm the setting.
Setting range: 0–5 minutes (10-second increments,
default value: 0 seconds)
NOTE
The interval time setting is retained even when the power is
turned off.
Outputting in mono
This player can output analog and digital signals in mono.
To make the player output in mono, set the
08 Mono
menu item to
ON
(default value:
OFF
).
When mono output is on,
MONO
appears at the bottom of
the display.
NOTE
The mono output on/off setting is retained even when the
power is turned off.
Controlling the player with a
footswitch
You can connect a TASCAM RC-3F footswitch (sold
separately) to the REMOTE jack on the front panel and
use it to control the player.
TASCAM RC-3F
foot switch (sold separately)
Setting the footswitch
To set the footswitch, use the
18 REMOT
menu item to
assign the functions to the switch controls (pedals).
Options:
OFF
,
1
(default value),
2
,
3
,
4
Using the footswitch
When you press the controls (pedals) on the footswitch,
they function according to the
18 REMOT
setting.
Footswitch mode settings
The functions of the controls in each mode are as follows.
MODE
Footswitch controls
L (brief press) C (brief press) R (brief press)
L (long press) C (long press) R (long press)
1
Â
PLAY/PAUSE
¯
Ô
STOP
2
SKIP BACK PLAY/PAUSE CALL
Ô
STOP
3
PITCH (−) PLAY/PAUSE PITCH (+)
PITCH (−)
continuous
STOP PITCH (+)
continuous
4
PAUSE PLAY STOP
– – – – – – – – –
34 TASCAM CD-6010
7 – Other Functions
Controlling the player with a
direct playback remote
You can connect a TASCAM RC-20 direct play remote (sold
separately) to the REMOTE jack on the front panel to use
the unit's direct playback function.
TASCAM RC-20
Direct Play Remote
(sold separately)
Fader and event start
Fader start and stop
By connecting an external fader switch to the CONTROL
I/O PARALLEL connector, the player can be started and
stopped using a fader.
Connect the fader switch to the CONTROL I/O PARALLEL
connector as shown below.
START
STOP
Pin 1
FADER START
Pin 8
GND
PA RALLEL
For details about using the CONTROL I/O PARALLEL
connector, see “Using the parallel connector” on page 35.
Event start
When stopped or paused, playback can be started by
inputting a one-shot pulse signal from outside. Input a
one-shot pulse (active low, 30 ms or longer) through the
"2 PLAY" pin of the CONTROL I/O PARALLEL connector.
Using the RS-232C connector
The CONTROL I/O RS-232C connector (D-sub 9-pin, RS-
232C compliant) can be used for serial control of this unit
by a computer or other external device.
Setting the baud rate
Use the
13 232C
menu item to set the baud rate.
Select
96
(9600 bps, default value),
19 2
(19200 bps) or
384
(38400 bps).
For further details, please contact TASCAM customer
support.
NOTE
The baud rate setting is retained even when the power is
turned off.
Restoring factory default settings
You can restore the unit to factory default settings that
are stored in the backup memory. The following default
settings are stored in the backup memory
Playback mode
Playback time display mode
Auto-ready function on/off
Auto-cue function on/off
Repeat function on/off
Various menu settings (See "Menu structure" on
page 19.)
To restore all settings to their factory defaults
1 Select the
20 RESET
menu item.
2 Press the TRACK SKIP/DATA knob.
-SURE-
blinks on the display.
3 Press the TRACK SKIP/DATA knob on the main unit or
the ENTER button on the remote control to restore
the settings to the factory defaults stored in the
backup memory and exit menu mode.
The display returns to ordinary disc and track
information.
TASCAM CD-6010 35
7 – Other Functions
Checking the firmware version
To check the firmware version, use the
21 INFO
menu
item.
1 Select the
21 INFO
menu item.
2 Press the TRACK SKIP/DATA knob on the main unit or
the ENTER button on the remote control to show the
system firmware version on the display.
Version Build number
3 Press the TRACK SKIP/DATA knob on the main unit
or the ENTER button on the remote control again to
return to menu item selection.
Digital output format setting
You can set the format of the digital signal output from
the COAXIAL and XLR DIGITAL OUTPUTS. You can set
the output format using the
22 D-OUT
menu item. The
digital signal output format options are as follows (default
value:
AES
).
SPD S/PDIF (consumer)
AES AES/EBU with U bit (professional)
AE_ AES/EBU without U bit (professional)
NOTE
The digital output format setting is retained even when the
power is turned off.
Analog output attenuation
You can set the unit so that the analog output level
is attenuated by -4 dB. Set this appropriately for the
equipment connected to the outputs.
Use the
19 ATT
menu item to set whether or not -4dB
attenuation is used or not (default value:
OFF
).
NOTE
The attenuation setting is retained even when the power is
turned off.
Using the parallel connector
Using the CONTROL I/O PARALLEL connector, you can
use external parallel control to operate this unit.
Pin
No.
Function
(Pin 14 = H or Open)
Function
(Pin 14 = L)
IN/
OUT
1 GND GND -
2 PLAY FLASH 1 In
3 STOP FLASH 2 In
4 INDEX/DIR SEARCH FWD FLASH 3 In
5
TRACK SKIP FWD [¯]
FLASH 4 In
6
TRACK SKIP REV [Â]
FLASH 5 In
7 INDEX/DIR SEARCH REV STOP/LOAD In
8 FADER START/STOP (Reserved) In
9 FLASH LOAD TALLY FLASH LOAD TALLY Out
10 PAUSE TALLY PAUSE TALLY Out
11 NO DISC TALLY (Reserved) Out
12 STOP TALLY STOP TALLY Out
13 PLAY TALLY PLAY TALLY Out
14 REMOTE SELECT* REMOTE SELECT* In
15 PAUSE FLASH 6 In
16 CALL FLASH 7 In
17
SEARCH FWD []
FLASH 8 In
18
SEARCH REV [Ô]
FLASH 9 In
19 (Reserved) FLASH 10 In
20 (Reserved) FLASH PAGE** In
21 EOM TRACK TALLY EOM TRACK TALLY Out
22 (Reserved) (Reserved, fixed high) Out
23
RELAY OUT
(EOM DISC TALLY)
(Reserved) Out
24 (Reserved) (Reserved, fixed low) Out
25 +5V* +5V* -
IN: external command reception (operates active low,
when ground 30 ms or longer)
OUT: transport status display signal by open drain
(20V maximum voltage, 35mA maximum current, 10Ω
impedance)
*When pin 14 (REMOTE SELECT) is high or open, the
functions in the left column are active and ordinary
parallel control can be used. When set to low, the
functions in the right column are active and they can be
used as flash start keys.
**When pin 14 (REMOTE SELECT) is low, the high/low
status of pin 20 (FLASH PAGE) determines the track
assignments as shown below.
***100mA maximum supplied current
#14 #20 Flash start tracks
Low High 1–10
Low Low 11–20
The following connection example shows playback
control by fader start/stop.
START
STOP
Pin 1
FADER START
Pin 8
GND
PA RALLEL
36 TASCAM CD-6010
8 – Troubleshooting
Please check the following items if the unit is not functioning properly. If you are still unable to resolve the problem please
contact the retailer where you purchased the unit or TASCAM customer support.
Power does not turn on
ª
Make sure that the power plug is firmly inserted.
Unit cannot be controlled from the front
ª
panel
Make sure that the panel lock function is not on.
Unit cannot be controlled with the remote
ª
control.
Confirm that batteries are in the remote control and that
they have a charge.
No sound
ª
Confirm the unit’s connections to the monitoring system
and check the volume of the amplifier.
CD cannot be played back
ª
If it is a data CD, containing MP3 files, confirm that they
use a bit rate that this unit can handle.
Confirm that the disc is not scratched or dirty.
Noise is heard
ª
Check whether a connection cable might have a bad
connection.
TASCAM CD-6010 37
9 – Error Messages
When one of the following error messages appears, refer to the response below and resolve the cause. If you are still unable
to resolve the problem please contact TASCAM customer support.
Message Meaning Response
Err01
TOC Read Error
Clean or change the disc.
Err09
Flash ROM Error
If one of these errors appears, turn the power off and back on. If you are unable to turn
the power off, disconnect the power cord.
Err10
SDRAM Error
Err13
SYSTEM Error
38 TASCAM CD-6010
10 – Specifications
Media and formats
Device type
CD player
Compatible discs
Compact discs (12cm/8cm, including CD-R discs)
Playable disc types
CD-A, CD-ROM (ISO9660 LEVEL 1/2/JOLIET format)
Playable file formats
Audio CD (CD-DA), MP3 (MPEG Audio Layer III), WAV
MP3 playback specifications
Audio Modes: stereo/mono
Sampling Frequency: 32 kHz/44.1 kHz/48 kHz
Bit Rate: 32 kbps–320 kbps and VBR
WAV playback specifications
Sampling Frequency: 32 kHz/44.1 kHz/48 kHz
Sampling Bit Rate: 16 bit
Audio CD playback specifications
Sampling Frequency: 44.1 kHz
Sampling Bit Rate: 16 bit
Number of Channels: 2
Analog audio output
Analog outputs (unbalanced)
Connector: RCA pin jacks
Output impedance: 200 Ω
Standard output level: −10 dBV (0.32 Vrms)
Maximum output level: +6 dBV (2.0 Vrms)
Analog outputs (balanced)
Connector: XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Output impedance: 100 Ω
Standard Output level: +4 dBu (1.23 Vrms)
Maximum Output level: +24 dBu (12.28 Vrms)
PHONES connector
Connector: 6.3mm (1/4”) standard stereo jack
Maximum output level: 45 mW + 45 mW or more
(THD+N 0.1% or less, 32Ω load)
Digital audio output
Digital output connector (COAXIAL)
Connector: RCA pin jack
Supported signal formats: IEC 60958-3 standard for
consumer use, IEC 60958-4 for professional use
Output impedance: 75 Ω
Output level: 0.5 Vp-p
Digital output connector (XLR)
Connector: XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Supported signal formats: IEC 60958-3 standard for
consumer use, IEC 60958-4 for professional use
Output impedance: 110 Ω
Control input and output
REMOTE connector
Connector: 2.5mm TRS jack
RS-232C connector
Connector: D-sub 9-pin (female, inch standard)
CONTROL I/O PARALLEL connector
Connector: D-sub 25-pin (female, inch standard)
Audio performance
Frequency response
20 Hz–20 kHz: ±0.5 dB (JEITA)
S/N ratio
95 dB or more (JEITA)
Dynamic range
95 dB or more (JEITA)
Distortion
0.005% or less (JEITA)
Channel separation
95 dB or more (1 kHz, JEITA)
TASCAM CD-6010 39
10 – Specifications
Backup memory
The following settings are backed up even when the
power is turned off.
Playback mode
Playback time display mode
Auto-ready function on/off
Auto-cue function on/off
Cue settings
Repeat function on/off
Various menu settings
General
Power supply
AC 100-240 V, 50-60 Hz
Power consumption
12.5 W
Dimensions (W x H x D)
483 x 94 x 306 mm
Weight
4.9 kg
Operating temperature range
5º–35° C
Installation angle
15º or less
Dimensional drawings
㻠㻟㻟㻌㼙㼙
㻠㻤㻟㼙㼙
㻣㻢㻌㼙㼙
㻤㻤㻌㼙㼙
㻥㻠㻌㼙㼙
㻠㻢㻡㼙㼙
㻠㻟㻡㼙㼙
㻝㻡㻌㼙㼙
㻞㻤㻡㻌㼙㼙 㻢㻌㼙㼙
㻟㻜㻢㻌㼙㼙
Illustrations in this manual might differ from the actual product.
In order to improve the product, specifications and appearance could be changed without prior notice.
TEAC CORPORATION
tascam.jp
Phone: +81-42-356-9143
1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan
TEAC AMERICA, INC. tascam.com
Phone: +1-323-726-0303
7733 Telegraph Road, Montebello, California 90640 USA
TEAC CANADA LTD. tascam.com
Phone: +1905-890-8008 Facsimile: +1905-890-9888
5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada
TEAC MEXICO, S.A. de C.V. teacmexico.net
Phone: +52-55-5010-6000
Río Churubusco 364, Colonia Del Carmen, Delegación Coyoacán, CP 04100, México DF, México
TEAC UK LIMITED tascam.co.uk
Phone: +44-8451-302511
Suites 19 & 20, Building 6, Croxley Green Business Park, Hatters Lane, Watford, Hertfordshire, WD18 8TE, UK
TEAC EUROPE GmbH tascam.de
Phone: +49-611-71580
Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany
Printed in China
CD-6010
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tascam CD-6010 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info