Bedienungsanleitung Tascam CD-6010 (Seite 25 von 40) (Englisch)

587259

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

TASCAM CD-6010 25

6 – Various Playback Functions

Call function

During playback or when paused, press the CALL [PLAY

MODE] button on the player or the CALL button on the

remote to locate to the point when playback last started

and pause playback. However, when this function is used

with a data CD, playback pauses at the beginning of the

track that was playing when playback was last started.

Cue function

You can use the cue function to store in memory up to 20

time points on an audio CD to recall them when desired.

Press the CUE button on the front panel to use the cue

function. When active, the CUE indicator lights.

NOTE

The cue function does not work with data CDs.

•

When the cue indicator is lit, the number buttons on the

•

unit and the remote control are used by the cue function

and cannot be used to designate track numbers or to

flash start tracks. To use these functions, push the CUE

button to turn the CUE indicator off.

Cue points are retained even when the power is turned

•

off.

Setting cue points

During playback or when paused, after putting the unit in

shift mode (SHIFT indicator lit), press a number button on

the unit or remote control to set a cue point at the current

playback time. Press the +10 button to use the buttons to

set points 11–20 when the indicator is lit.

The indicators light for number buttons that have cue

points set.

NOTE

You can also set points by pressing a number button while

pressing and holding the SHIFT button.

Using cue points

When shift mode is disabled (SHIFT indicator unlit) and

a cue point is assigned (number indicator lit), press the

corresponding number button to jump to that cue point

and pause.

If the FLASH indicator is lit, pressing a number button

with a set cue point will start playback from that point

immediately. (See "Flash start function" on page 30.)

Clearing cue points

To clear a cue point, press the corresponding number

button (indicator lit) while pressing the CLEAR button.

After a cue point has been cleared the indicator will

become unlit.

Incremental play function

When the incremental play function is on, pressing the Á

PLAY button on the unit or the remote during playback

will start playback from the beginning of the next track,

and pressing the ª STOP [INTRO CHECK] button on the

player or the ª STOP button on the remote will pause

playback at the beginning of the next track.

NOTE

When the incremental play function is on and playback

•

is paused, pressing the Á PLAY button on the unit or the

remote will start playback from that point, and pressing

the ª STOP [INTRO CHECK] button on the player or the

ª STOP button on the remote stops playback.

During playback of the last track, if you press the

•

Á PLAY

button on the unit or the remote, playback of the first

track will start. If you press the ª STOP [INTRO CHECK]

button on the player or the ª STOP button on the remote,

playback will pause at the beginning of the first track.

Setting the control I/O parallel connector pin 2 (PLAY IN)

•

or 3 (STOP IN) to ON has the same effect.

Receiving a stop command from the control I/O parallel

•

connector pin 8 (FADER START/STOP) has the same effect.

To turn the incremental play function on/off, use the

Inc-P

menu item (default value:

OFF

When the incremental play function is on,

INCR

appears

in the lower part of the display.

NOTE

The incremental play function on/off setting is retained even

when the power is turned off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-6010 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info