Bedienungsanleitung Tascam CD-6010 (Seite 28 von 40) (Englisch)

587259

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

28 TASCAM CD-6010

6 – Various Playback Functions

Using the remote control:

Press the PITCH button to turn the pitch control function

on. Use the + and − buttons to adjust the setting in the

range between −16% and +16%.

Setting the pitch adjustment

increment

To set the adjustment increment for pitch control

playback (pitch step) use the

12 P-STEP

menu item.

Options (%):

0 .1

(default value),

0.5

1.0

NOTE

The pitch step setting is retained even when the power is

turned off.

Changing playback speed

without changing pitch

(KEY ORIG)

Ordinarily, when using the pitch control function, the

speed changes along with the pitch. When the original

key function is on, however, the pitch does not change

even when the playback speed is changed.

Use one of the following procedures to turn the original

key function on/off.

Press the

•

KEY ORIG button on the remote.

Use the

•

01 Origin

menu item (default value:

OFF

When the original key function is on,

KEY ORIG

appears

at the bottom of the display.

NOTE

The original key function on/off setting is retained even when

the power is turned off.

Program playback

By setting a program in advance, you can set the unit to

play tracks in the order that you want. Up to 100 tracks

can be added to the program. To use program playback

to play tracks in the program order, set the playback

mode to program playback mode and start playback. (See

“Selecting the playback mode” on page 23.)

Program setting mode

Use the following procedures to enter program setting

mode and add tracks to the empty program.

NOTE

You can add tracks to the program regardless of the

•

current playback mode.

You can add the same track to the program multiple

•

times.

The program setting is retained even when the power is

•

turned off or the disc is ejected. The player can remember

one program for up to 100 discs.

Using the front panel buttons:

1 When playback is stopped, select the

04 Prog

menu item, and press the TRACK SKIP/DATA knob to

enter program setting mode. The display appears as

follows.

Track number

Program number

2 Use the number buttons or TRACK SKIP/DATA knob

to select the number of the track that you want to

add at the currently displayed program number. The

selected track number blinks.

3 Press the SEARCH  [AUTO READY] button to

add the selected track. The next program number is

shown.

4 Repeat steps 2 and 3 to add tracks as desired.

NOTE

After selecting a track, turning the TRACK SKIP/DATA knob to

the right or pressing the SEARCH  [AUTO READY] button

adds the track to the program. If you exit program setting

mode without doing this, the track selected just before will

not be added to the program.

5 When you are done adding tracks to the program,

press the TRACK SKIP/DATA knob to exit program

setting mode.

Using the remote control:

1 When stopped, press the PGM button to enter

program setting mode. The display appears as

follows.

Track number

Program number

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-6010 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info