Bedienungsanleitung Tascam CD-9010CF (Seite 10 von 56) (Englisch)

587261

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

TASCAM CD-9010CF

2 – Names and Functions of Parts

Disc tray



Press the OPEN/CLOSE button to open the disc tray to load

or remove discs.

Press the OPEN/CLOSE button again to close the disc tray.

CF card slot



Insert and eject CF cards here. (See “Inserting and ejecting

CF cards” on page 19.)

CF indicator



This blinks when a CF card is inserted and data is being read

from the card. When data reading is complete, the indicator

stays lit and playback is possible.

MANUAL EJECT



Use this to remove a disc when the power is off.

BROWSE button



Press to open the

BROWSE

screen.

With data CDs and CF cards, use this screen to look inside

folders, for example.

With audio CDs, use the screen to see its tracks.

TIME DISPLAY button



Press when the Home Screen is open to switch the time

display between elapsed track time and remaining track

time. This button only changes the display on this unit.

To change the time display on a connected TASCAM

RC-9010/RC-9010S remote control (sold separately), press

the TIME DISPLAY button on the remote.

When the Home Screen is open, press and hold this button

while turning the DATA dial to adjust the display contrast.

NOTE

This operation only adjusts the contrast of this unit. It does not

adjust the contrast of a connected TASCAM RC-9010/RC-9010S

remote control (sold separately).

CD indicator



This blinks when a CD is loaded. When data reading is

complete, the indicator stays lit and playback is possible.

OPEN/CLOSE button



Press this to open the disc tray.

NOTE

In order to reduce the amount of time required to remove a disc,

the disc tray will open before the disc has completely stopped.

CD/CF button and indicators



Press to switch between the CD and the CF card as the

playback media. The indicator above the button for the

selected media lights.

 ST/MONO button and indicators

Press to switch between stereo and mono output from

the LINE OUTPUTS, MONITOR OUTPUTS and PHONES

jack. The indicator for the selected format lights above the

button.

When set to MONO, stereo audio tracks will be played back

in mono. Use the

MONOMIX

item on the

SYSTEM

menu screen

to set the format of the output mono mix. (See "Mono mix

setting" on page 43.)



PHONES jack/knob

Use this standard stereo jack to connect stereo headphones.

Use the PHONES knob to adjust the headphones output

level.

The knob can be pushed in and locked, allowing the unit

to be stored and transported safely. To unlock it, push it in

again. (See "Connecting headphones" on page 20.)

CAUTION

Before connecting headphones, use the PHONES knob to lower

the volume. Failure to do so might result in sudden loud sounds,

which could harm your hearing or result in other trouble.

 STOP button/indicator

Press this button at any time to stop playback at the current

point.

Press this button during online or monitoring playback or

when in playback standby to stop playback.

This button lights when playback is stopped.

 MONITOR button/indicator

Press this button to start monitoring playback.

The playback signal is output through the MONITOR

OUTPUTS (R/L) and the PHONES jack.

Front panel

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-9010CF Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info