Bedienungsanleitung Tascam CD-A550 (Seite 40 von 52) (Englisch)

490773

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

40 TASCAM CD-A550/CD-A750

7 – Recording Cassette Tapes

CD DUB key

The tape automatically rewinds to the start of the A side,

and the tape counter resets to “0000.” The CD pauses at

the beginning of its first track. After the tape records about

eight seconds of silence (to avoid the leader tape), dubbing

starts with the CD beginning playback and the cassette

recorder beginning recording at the same time. (The DUB

indicator appears on the display.)

When the CD playback stops or the tape end is

•

reached, the tape stops (the tape side end that it

stops at depends on the reverse mode) and dubbing

ends.

When dubbing in two-side recording mode, if the

•

last track being recorded to the ﬁrst side of the tape

is not recorded completely before the operation

direction reverses, that track is recorded again from

its beginning on the second side of the tape.

When dubbing in two-side recording mode, nothing

•

is recorded for eight seconds after the operation

direction is reversed. (CD playback pauses while the

cassette recorder continues in record mode.)

Press the TAPE or CD STOP key to stop dubbing at

•

any time.

Adjusting the record level when dubbing

The recording level is automatically set when dubbing a

CD to a tape by default, but the record level can be adjusted

with the

INPUT

knob when dubbing.

1 Set "CD" as the recording source. (See “Selecting

the recording source” on page 38.)

2 When in standard display mode, press the MENU

key on the main unit or the remote control to enter

menu mode.

3 Use the –/+ keys on the main unit or the remote con-

trol to show "

DUB LEVEL?

" on the main display,

and press the ENTER key on the main unit or the

remote control.

4 Use the –/+ keys on the main unit or the remote con-

trol to select “VARI.”

Options: FIX (default value), VARI

5 Press the ENTER key on the main unit or the remote

control to return to the standard display.

6 Press the RECORD key on the main unit or the

remote control to make the unit record ready and

enable monitoring of the recording source.

7 Play the CD and observe the recording level meters

on the display.

8 Use the INPUT knob to adjust the recording level.

(See “Recording” on page 39.)

9 Press the CD STOP key to stop the CD and the TAPE

STOP key to take the unit out of record ready mode.

10 Press the CD DUB key on the main unit or the

remote control to conduct dubbing in the same way

as described above in “Basic dubbing.”

Using the TAPE EDIT function

Using the TAPE EDIT function, this unit can follow an

automatically prepared program and dub a CD according to

the tape length.

With the TAPE EDIT function, starting with the first track,

CD tracks that total less than the length of the tape side are

recorded in order to the A side of the tape. Then, recording

continues from the next track in order to the B side.

1 When CD playback is stopped, press the TAPE EDIT

key on the remote control to enter TAPE EDIT

mode. The main display appears as shown below.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-A550 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info