Bedienungsanleitung Tascam CD-RW900MKII (Seite 17 von 36) (Englisch)

587262

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

TASCAM CD-RW900MKII 17

4 − Playback operations

The CD -RW900MKII can be used to play back CDs (including

CD-R and CD-RW discs that have been recorded and finalized

on other types of recorder), as well as CD-R discs and CD-RW

discs that have been recorded on the unit.

Audio files in MP3 format on CD-ROM, CD-R and CD-RW are

also playable on the unit.

Track selection

Skipping track numbers backward or forward.

1. Select desired tracks for playback with the MULTI

JOG dial on the front panel. Turning clockwise

skips the track number backward and counter-

clockwise skips forward.

Or, press the SKIP key on the remote control.

Pressing

key skips the track number back-

ward and

key skips forward.

2. Press the PL AY key to start playback.

Or, press the PAUSE key to cue the track and enter

playback standby mode after moving to the head

of the selected track. To start playback, press the

PLAY key.

Using the skip function

Simple playback operations

WARNING

If you are monitoring using headphones, ﬁrst adjust

the level control to low on the unit, then connect

to the PHONES jack before playing back. This will

prevent any possible damage to your hearing.

NOTE



The explanation in this manual will assume the user is

starting from the normal Continuous mode.

1. Press the POWER switch to turn on the unit.

2. Press the

OPEN/CLOSE

key to open the disc tray.

The display shows Open. Insert a disc in the tray

with the label side up.

3. Press the

OPEN/CLOSE

key to close the tray. The

display shows Close when a disc is loaded into the

unit, then TOC Reading will appear, with the peri-

od flashing.

When the TOC has been read, the display shows the number of

tracks and total running time of the disc.

Disc type

Total running timeTotal number of tracks

The CD -RW900MKII also shows one of the following:

TOC A disc finalized

MP3 A disc contains MP3 files

4. Press the PLAY key to start playback.

Adjust the connected monitor system, or the level

control for the PHONES on the unit to set the listen-

ing level you desire.

NOTE



If a disc has scratch or grime, it could cause the laser

pickup to “skip.” In this case, set the READ SPEED sub-

menu in the PLAY menu option to “High“ (see “Opera-

tion basics” on page 16). This may resolve the prob-

lem, however, the unit’s running sound may become

louder.

5. To stop playback, press the STOP key.

To temporarily stop playback and enter playback

standby mode, press the PAUSE key. To resume

playback, press the PL AY key again.

NOTE



To conﬁrm the total playing time, use the PLAY TIME

option in the SYSTEM sub-menu (see “Operation

basics” on page 16)

Discs for playback

The CD discs in the CD-RW900MKII can play back the types of

discs listed below.

•

Commercial pre-recorded CDs recorded in CD-DA

format.

•

CD-R and CD-RW discs that have been recorded in

CD-DA format and finalized properly.

•

MP3 files recorded in ISO9660 level 1 and level 2

format on CD-R and CD-RW discs, and properly final-

ized. MP3 files that are recorded to a disc with Joliet

format extensions are also playable.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-RW900MKII Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info