Bedienungsanleitung Tascam CD-RW901MKII (Seite 35 von 44) (Englisch)

587263

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

TASCAM CD-RW901MKII 35

IMPORTANT SAFETY INSTRUCTIONS

Titles can be given to the disc and the tracks on the disc, using

the TEXT EDIT option on the TEXT sub-menu.

NOTE



After a new title is selected and entered on the disc,

TOC will light up on the display. If the power is turned

off, the TOC has not been recorded on the disc and

the titles will not have be added. You must ﬁnalize

the disc to save the titles.

Follow the guidelines below to input titles on the screen.

Operate them when in the text edit mode.

It is more efficient to connect a keyboard for title input ( see

“Title input by keyboard” on page 36).

Select the type of character for input

Press the DISPLAY key on the unit or the remote control

to select from two different types of characters.

Lower case letters/code: no indication

Capital letters/code: CAPS

Input procedure

Rotate the MULTI JOG dial or the MENU (+/-) keys on

the remote control to get the desired characters on the

display.

Push the MULTI JOG dial or press the ENTER key on

the remote control to enter.

To move the cursor position

Use the ∆ /˙ key and the ˚/¥ key on the front

panel, or the SEARCH key on the remote control.

To delete characters

Place the cursor on the character, then press the

ERASE/DEL key on the front panel, or the ERASE key

on the remote control.

To insert characters

Move the cursor to the location where you wish to insert

a character, and press the FINALIZE/INS key on the

front panel or the FINALIZE key on the remote control.

To change a character

Place the cursor on the character to be changed, then

input the desired character.

NOTE



As with the TEXT menu, if you attempt to eject the

disc without writing the TOC to the disc, the display

will show Sure? Text!. If you want to eject the disc

without performing a TOC write, press the OPEN/

CLOSE key while “Sure Text!” is shown on the display.

The text that have been edited or entered will be

abandoned.

The disc or track title on a ﬁnalized disc cannot be

edited. Unﬁnalizing (CD-RW only) is needed in this

case to use the title input function.

Title input operation

1. While stopped, select the TEXT EDIT option in the

TEXT sub-menu (see “Operation basic” on page 16).

2. Rotate the MULTI JOG dial or repeatedly press the

MENU (+/-) keys on the remote control to select the

track number you wish to title.

3. Push the MULTI JOG dial or press the ENTER key

on the remote control.

Now, you can input or edit the track title following

the guidelines above.

4. Press the MENU key to enter.

If you want to cancel, press the STOP key.

Track title input

Disc title input

1. While stopped, select the TEXT EDIT option in the

TEXT sub-menu (see “Operation basic” on page

16). Text> Disc will appear.

2. Press the MULTI JOG dial or the MENU (+/-) key on

the remote control.

Now, you can input or edit the disc title following

the guidelines above.

3. Press the MENU key to enter.

If you want to cancel, press the STOP key.

7 − Titling

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-RW901MKII Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info