Bedienungsanleitung Tascam DA-3000 (Seite 26 von 60) (Englisch)

587269

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

TASCAM DA-3000

4 – Recording

Using this unit as an AD/DA converter

This unit can also be used as an AD/DA converter when

connected to another recorder or DAW, for example.

To use this unit as an AD/DA converter, set

ADDA DIRECT

mode to ON. When ON, the

INPUT SELECT

screen setting

does not function, and setting the input selection for the

analog and digital inputs separately is necessary. In addition,

when

ADDA DIRECT

mode is ON, playback is not possible,

but recording the analog input signal is possible. To play back a

recording, set

ADDA DIRECT

mode to OFF.

1. Press the MENU button repeatedly to open the

I/O

SETTINGS

menu, and turn the MULTI JOG dial to select

ADDA DIRECT

2. Press the MULTI JOG dial to open the

ADDA DIRECT

screen.

3. Turn the MULTI JOG dial to turn AD/DA DIRECT ON or OFF.

Options: OFF (default), ON

4. Press the MULTI JOG dial to confirm the setting.

The cursor will move to the ANA. IN setting.

5. Turn the MULTI JOG dial to select the ANA. IN.

Options:

BALANCED (default): balanced XLR input jacks

UNBALANCED: unbalanced RCA input jacks

6. Press the MULTI JOG dial to confirm the setting.

The cursor will move to the DIGI. IN setting.

7. Turn the MULTI JOG dial to select the DIGI. IN.

Options:

For PCM recording: AES/EBU, SPDIF

For DSD recording: SDIF-3, DSD-raw

NOTE

The selected options will change automatically according

to the recording file format selected on the

FILE TYPE

screen. (See “Setting the recording file format” on page

23.)

8. Press the MULTI JOG dial to confirm the setting and return

to the menu screen.

CAUTION

When ADDA Direct Mode is ON, the input signal level setting

will only affect the Analog Input.

Basic recording operations

You can begin recording after you have finished making the

settings described previously, including input source selection,

recording file format, sampling rate converter activation and

input level adjustment.

To start recording standby from a stopped state:

Press the front panel or remote control RECORD button to

put the unit in recording standby (The RECORD [TRK INC]

and PAUSE buttons on the main unit light).

To start recording from recording standby:

Press the front panel or remote control PL AY button.

To switch from recording to recording standby:

Press the main unit PAUSE button or the remote control F1

button.

To stop recording:

Press the front panel or remote control STOP button. When

the unit stops recording, the recorded data will be written

and an audio file will be created.

NOTE

•

On the

FILE NAME

screen, you can set the format of the

names automatically given to audio files when they are

created. (See “Setting the file name format” on page 30.)

•

The maximum file size for each track is 2 GB.

•

Recorded tracks will be created in the current folder. (See

“Folder operations” on page 33.)

CAUTION

While the recording is being written to the current media,

"WRITING FILE …" will appear the display.

While this message is shown, do not move the unit, turn

off the power or remove the current media. The recorded

content cannot be saved correctly if writing is interrupted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DA-3000 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tascam DA-3000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info