Bedienungsanleitung Tascam DA-6400 (Seite 24 von 64) (Englisch)

617901

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

TASCAM DA-6400/DA-6400dp

4 – Recording

Setting input monitoring for specific

channels

When the

MODE

on the

INPUT MONITOR

screen is set to

Individual

, input monitoring can be turned on/off for

specific channels individually or all at once.

1. Open the

INPUT MONITOR

screen. (See “Menu

operation procedures” on page 16.)

2. On the

INPUT MONITOR

screen, set the input

monitoring mode to

Individual

Underneath the

MODE

item, the

RANGE SELECT

item

appears.

3. Press the MULTI JOG dial to confirm and move the cursor to

the next item.

Use the .// [MARK .//] buttons to move the

cursor.

When the cursor is at ON or OFF, press the MULTI JOG dial to

open a confirmation pop-up message.

When the confirmation message is open, press the MULTI

JOG dial to set all channels at once.

Setting the first channel to be included when selecting a range

of channels at once

Options:

CH01

–

CH63

: First channel included when selecting a

range of channels at once

CH02

–

CH64

: Last channel included when selecting a

range of channels at once

OFF

: Input monitoring status for range of channels

selected at once

4. By moving the cursor to the input monitoring indicator area,

you can set input monitoring for individual channels.

Press the MULTI JOG dial to enable/disable monitoring for

the channel where the cursor is.

NOTE

You can also turn the MULTI JOG dial to select a channel.

Turn the MULTI JOG dial while pressing and holding the

SHIFT button to move the cursor by 4 channels at a time.

Making recording channel settings

1. Select the

REC FUNCTION

item on the

REC FILE

FORMAT

page to open the

REC FUNCTION

screen. (See

“Menu operation procedures” on page 16.)

2. Set the recording function mode.

Options

ALL ON

(default): Recording is enabled for all channels

ALL OFF

: Recording is disabled for all channels

Individual

: Allow recording to be enabled/

disabled for specific channels individually or all at once

3. Confirm the setting and return to the Menu Screen.

Setting the record function for specific

channels

When the

MODE

on the

REC FUNCTION

screen is set to

Individual

, recording can be enabled/disabled for specific

channels individually or all at once.

1. Open the

REC FUNCTION

screen. (See “Menu operation

procedures” on page 16.)

2. Set the recording function mode on the

REC FUNCTION

screen to

Individual

Underneath the

MODE

item, the

RANGE SELECT

item

appears.

3. Press the MULTI JOG dial to confirm and move the cursor to

the next item.

Use the .// [MARK .//] buttons to move the

cursor.

When the cursor is at ON or OFF, press the MULTI JOG dial to

open a confirmation pop-up message.

When the confirmation message is open, press the MULTI

JOG dial to set all channels at once.

Setting the first channel to be included when selecting all

channels at once

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DA-6400 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info