Bedienungsanleitung Tascam DP-008EX (Seite 31 von 92) (Englisch)

617893

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

TASCAM DP-008EX

3 – Names and functions of parts

Screen operations

After using the MENU button or a dedicated button

to open a screen, use the screen in the following

manner.

This section describes the basic operation procedures.

Depending on the screen that is open the assign-

ments of the function buttons might differ.

NOTE

During playback or recording, you cannot open

screens that might access the SD card. If you try

to open one of these screens, a

Not Stopped

(the recorder is not stopped) pop-up message will

appear.

Function buttons

The currently assigned function of each button is

shown above it at the bottom of the screen. In this

manual, for convenience, we refer to the function

buttons as F1, F2, F3 and F4 in order from the left.

BACK

appears above the F1 button, showing that this

is the function assigned to this button on the screen.

In this manual, we write this as “F1 [BACK] button”.

In a similar manner the assignments for the F2, F3

and F4 buttons are

EXEC

INS

and

DEL

in that order.

0 Use the DATA wheel to select (highlight) items

you want to access.

This example shows the

screen.

On the screen, the

SONG

item is selected

(highlighted).

0 When there are more items in the menu list above

(below) those currently shown, a 5 and b icon

appears at the top (bottom) of the scrollbar in

the right half of the screen. (In the

screen

shown above, the b shows that there is at least

one more item below

DATA BUCKUP

0 If an item has a submenu (as on the

screen,

for example), an t appears to its right, and

pressing the F4 [t] button will open it.

0 In a submenu, you can press the F1 [BACK]

button to return to the previous screen.

0 To execute an operation, press the function

button that has

EXEC

assigned to it.

This example shows the

SONG LOAD

screen.

Press the F2 [EXEC] button to load the selected

(highlighted) song.

0 When a setting value is selected (highlighted),

use the DATA wheel to change the value.

To select (highlight) different item press the

function button that has 5 or b assigned to it.

This example shows the

CLONE TRACK

screen.

Use the DATA wheel to change the

SOURCE TRK

(the track that is being copied) value.

Use the F3 [5] and F4 [b] buttons to move up

and down to change the selected (highlighted)

item.

Press the F2 [EXEC] button to clone the track

using the settings that you made.

0 When moving left or right is possible, use the

m [RTZ] and , [LRP] buttons. When this

operation is possible, an illustration on the screen

shows the assignment of the m and ,

buttons to cursor movement.

0 To continue to the next operation, press the F4

[NEXT] button.

0 To leave a screen that was accessed using a

dedicated button, press the F1 [EXIT] button.

0 To return to the Home Screen, press the HOME

button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DP-008EX Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tascam DP-008EX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info