Bedienungsanleitung Tascam DP-008EX (Seite 49 von 92) (Englisch)

617893

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

TASCAM DP-008EX

6 – Basic Recording

Undoing operations (undo)

This unit allows you to undo, for example, unwanted

operations and recordings that were unsuccessful.

Undo can be used on many ordinary operations,

including editing and recording operations. This

unit has two types of undo functions. Single undo

can be used with a simple button press, while multi-

undo allows you to return to and undo a specific past

operation.

NOTE

The UN/REDO [HISTORY] indicator lights when a

single undo or multi-undo has been conducted.

Undoing the last operation (single

undo)

Press the UN/REDO [HISTORY] button to return to

the state before the last operation was conducted.

After doing this, the UN/REDO [HISTORY] indicator

lights, showing that redo (see below) is possible.

UN/REDO [HISTORY] indicator

Cancelling an undo operation (redo)

Press the UN/REDO [HISTORY] button when it is lit

to return to the state of the last operation. The UN/

REDO [HISTORY] indicator turns OFF.

NOTE

If single undo is used when multi-undo (described

below) has already been used to return the

unit to a previous state, it will go one more step

backward. If you press the UN/REDO [HISTORY]

button again to redo the step, the single undo

operation is cancelled, and the previous multi-

undo state is restored. In this case, the unit is not

restored to the most recently conducted operation,

so the UN/REDO [HISTORY] indicator remains lit

because further redo operations are possible.

Undoing a previous operation (multi-

undo)

1. Press and hold the UN/REDO [HISTORY] button

to open the

HISTORY

screen.

The

HISTORY

screen shows the operation history

as a list.

Each operation in the list is called an “event” .

The event list starts at the bottom with event

number

(

-START UP-

The most recent event has an asterisk (*) to its

right.

All events that occurred after a selected event

can be undone at once. This operation is called

“multi-undo” because it allows you to undo

multiple events and return to an earlier state.

2. Use the DATA wheel to select the event that you

want to return to (all events after the selected

event will be undone).

3. Press the F2 [EXEC] button to execute the multi-

undo and restore the state just after the selected

event was conducted.

In this state, the UN/REDO [HISTORY] indicator

lights.

The unit has been returned to a previous state,

but the event information undone through the

above operation is not erased. On the

HISTORY

screen, a * appears to the right of current event

after undoing.

If you make a new recording or new edits

after using multi-undo (UN/REDO [HISTORY]

indicator lit), the event history after the current

event is cleared and the last operation conducted

becomes the most recent event.

NOTE

When the

HISTORY

screen is open, the UN/REDO

[HISTORY] button does not function, so single

undo and redo cannot be used.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DP-008EX Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tascam DP-008EX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info