Bedienungsanleitung Tascam DP-008EX (Seite 63 von 92) (Englisch)

617893

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

TASCAM DP-008EX

9 – Mixdown and mastering

Setting the starting and ending points

Before you start creating a stereo master track, you

must set the starting and ending points. The part of

the song between the IN and OUT points will be

recorded as the stereo master track. Ordinarily, the

beginning of the song is set as the IN point and the

end of the song is set as the OUT point.

Press the F3 [IN] button at the point where you want

to start the stereo master track to set the IN (starting)

point and press the F4 [OUT] button at the point

where you want to end it to set the OUT (ending)

point.

For details about adjusting IN and OUT points, see

“Setting IN and OUT points” on page 53.

Creating a stereo master track

After setting the IN and OUT points, you can make the

stereo master track.

1. When the recorder is stopped, press the

BOUNCE/MIXDOWN/MASTERING button to

open the

RECORDER MODE

screen.

2. Use the DATA wheel to select (highlight) the

MIXDOWN

item.

3. Press the F4 [EXEC] button.

After a

Mixdown!

pop-up message appears, the

recorder switches to master recording mode and

the Home Screen reopens.

At this point, if you start playback or recording,

you will be able to hear the mixed track signals

(including signals that will be recorded) through

headphones or an external monitoring system

(powered monitor speakers or an amplifier and

speakers).

NOTE

•

When in master recording mode,

MIXDOWN

appears highlighted at the top left of the Home

Screen.

•

If you try to switch to

MIXDOWN

mode when the

length of the interval between IN and OUT points

is less than four seconds, a

Trk Too Short

(track is too short) pop-up message appears and

MIXDOWN

mode will not be activated.

•

You cannot change the IN and OUT points when in

MIXDOWN

mode.

•

Playback and some other functions do not work

when the unit is in

MIXDOWN

mode. If you try to use

one of these functions, an

In Mixdown Mode

pop-up message appears.

4. While pressing and holding the Record (0)

button, press the Play (7) button to start

creating a stereo master track. The Record (0)

indicator lights.

Regardless of the prior position of the recorder,

recording starts from the IN point.

As necessary, use the LEVEL and PAN knobs to

adjust the mix. These adjustments will affect the

recorded stereo master track.

Creating a stereo master track automatically ends

when the recorder reaches the OUT point.

5. If you want to redo creation of the stereo master

track, press the Play (7) button again while

pressing and holding the Record (0) button.

This will create a new stereo master track,

overwriting and deleting the previous one.

NOTE

•

After recording a stereo master track, you can play

it back to check it. (See “Checking stereo master

tracks” on page 64.)

•

You can undo the creation of a stereo master track.

So, after re-recording the stereo master track

several times, you can go back and choose one

that was previously recorded.

6. Press the BOUNCE/MIXDOWN/MASTERING

button to open the

RECORDER MODE

screen,

and use the DATA wheel to return the recorder to

MULTI TRACK

mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DP-008EX Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tascam DP-008EX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info