Bedienungsanleitung Tascam DP-02CF (Seite 24 von 80) (Englisch)

617899

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

IMPORTANT SAFETY PRECAUTIONS

24 TASCAM DP-02/DP-02CF

1 – Starting out with your DP-02/DP-02CF

When you have connected a source, and assigned the

inputs to tracks, you are ready to start recording.

1. Press the REC key of the track(s) you’re going to

record on, which start to flash slowly (this process is

called “arming the track(s)”.

2. Press and hold the RECORD (–) key and press the

PLAY (¥) key.

The RECORD (–) key lights red, and the PLAY (¥)

lights green. The track REC keys stop flashing and

light steadily.

3. Press STOP when you’ve finished recording.

4. To return to the place where you started recording,

press and hold down the STOP key, and press the F

FWD (LRP = Last Recording Position) key.

To return to the zero point, press and hold down

the STOP key and press the REW (RTZ = Return To

Zero) key.

5. Press PLAY (¥) to start playback of the recorded

tracks.

Use the track fader(s) and the red MASTER fader to

adjust the level of what you hear.

NOTE

The faders and other mixer controls adjust the output

level of the recorded when playing back recorded

tracks.

The pan controls position the track in the stereo

“image” you hear in the left and right speakers (or

headphones). The center position is marked by a

“click” when you turn the knob.

The EQ HIGH and EQ LOW equalization controls

work in a similar way to the bass and treble tone

controls on a stereo system. The center “click” posi-

tion of the knob means there’s no cut or boost for

that control.

T I P

You can change the EQ control point of the high and

low equalization controls. See ”EQ settings” on page

31 for details.

You can re-record the track if you’re not happy with it by

going back to the original point and repeating the process.

When you’re happy with your recording, you can un-arm

the track(s) (“safe” them) and arm and record on other

tracks. Remember to reassign the inputs as well as arming

the tracks.

Press the REW or F FWD keys for a short while and then

release them to move backwards or forwards through your

recording (like a tape recorder). Press and hold these keys

to increase the rewind or fast forward speed. Press STOP

to stop (again, like a tape recorder).

Recording

The unit has many advanced features which you may want

to use later on. Though we will not go into full detail on all

of them now, you should be aware of a few of them now.

More advanced features

Using marks to locate positions

Although “Recording” on page 24 shows you some ways

of moving around in your song, the unit provides you with

ways to jump around the song using location marks, as

well as locating to locate directly to a position you set.

See “Location” on page 29 for details of how to set and use

these location marks.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DP-02CF Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tascam DP-02CF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info