Bedienungsanleitung Tascam DP-24 (Seite 27 von 108) (Englisch)

534639

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

TASCAM DP-24 27

3 – Names and Functions of Parts

! VIRTUAL TRACK button/indicator

The

VIRTUAL TRACK

screen appears. (See "Virtual

tracks" on page 59.)

@ BOUNCE button/indicator

Press this button to switch to the Bounce mode (the

button lights).

# MIXDOWN/MASTERING button/indicator

Press this button to switch the Recorder mode among

Multi Track

Mixdown

and

Mastering

modes.

•

Multi Track

mode, press this button to

switch to the

Mixdown

mode.

•

Mixdown

mode, press this button to switch to

the

Mastering

mode when there is a master file,

or press it to return to the

Multi Track

mode

when there is no master file.

•

Mastering

mode, press this button to return

to the

Multi Track

mode.

NOTE

The current mode is displayed on the Home screen.

$ METRONOME button/indicator

Press this button to set the metronome.

The button flashes according to the set tempo/beat.

% UNDO/REDO button/indicator

Press this button to undo the immediately previous

action (single undo) or cancel a single undo (redo). (See

"Undoing an operation" on page 50.)

After a single undo or multi-undo, the UNDO/REDO

button becomes lit, showing that an operation has

been undone.

^ MONITOR SELECT button

Press this button to open the

MONITOR SELECT

pop-up window on the Home screen.

& MONITOR LEVEL knob

Use this knob to adjust the output level of the output

signals.

* MARK SET button

During recording or playback, press this button to set

a mark manually.

( AUTO PUNCH button/indicator

Press this button to turn the auto punch mode on and

off.

When auto punch mode is turned on,

Auto Punch

is displayed on the Home screen. (See "Auto punch in/

out" on page 57.)

) IN button

Press this button to locate the IN point.

Press and hold the MARK SET button and press this

button to set the IN point.

Press and hold the JUMPBACK (PREVIEW) button

and press this button to perform the pre-roll playback

up to the current position and stop. (See "Checking

cueing points (preview)" on page 57.)

Q REHEARSE button/indicator

Use this button to turn the Rehearse mode on and off.

In addition to auto punch in/out, you can also use the

Rehearse mode for ordinary recording.

W OUT button

Press this button to locate the OUT point.

Press and hold the MARK SET button and press this

button to set the OUT point.

Press and hold the JUMPBACK (PREVIEW) button and

press this button to perform the post-roll playback

from the current position, return and stop. (See

"Checking cueing points (preview)" on page 57.)

E REPEAT button/indicator

Press to this button to turn Repeat Playback mode on

and off. (See "Using repeat playback" on page 56.)

R JUMPBACK (PREVIEW) button

Press this button to rewind the specified number of

seconds from the current position and start playback.

T CD button

Press this button to open

menu screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DP-24 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info