617894
22
Zoom out
Zoom in
Vorherige Seite
1/104
Nächste Seite
22 TASCAM DP-32
3 – Names and Functions of Parts
1 GUITAR indicator
This indicator lights when the LINE-GUITAR switch on
the rear panel is set to GUITAR.
2 Display area
While viewing the screen, use the JOG/DATA dial or
the CURSOR (5/b/g/t) buttons to, for example,
return to the Home screen, open the
MENU
screen,
assign input signals to tracks and change parameters
for each input and track. (See page 26 for details.)
3 PHANTOM (+48V) buttons/indicators
Use these buttons to turn phantom power on/off for
MIC/LINE INPUTS A-D and E-H on the rear panel.
The PHANTOM indicators light when phantom power
is turned on for each set of inputs.
When the GUITAR indicator is lit, even if phantom
(+48V) power is ON (indicator lit) for E-H, INPUT H will
not receive phantom power.
CAUTION
•
Use the STEREO fader to lower the output volume
of the unit before turning phantom power on or off.
Depending on the microphone, a loud noise could
occur, possibly damaging equipment and harming
people's hearing.
•
Do not connect or disconnect a microphone when
phantom power is turned on.
•
Turn phantom power on only when using a
condenser microphone that requires phantom power.
•
Do not supply phantom power to an unbalanced
dynamic microphone.
•
Supplying phantom power to some types of ribbon
microphones could break them. Do not supply
phantom power to a ribbon microphone if you are in
doubt.
4 OL indicators (A-H)
These indicators light when the input source signal is
too loud.
5 TRIM knobs (A-H)
Use these knobs to adjust input levels. (See "Making
the first recording" on page 46.)
6 SOURCE buttons/indicators
When you press one of these buttons, the
corresponding input (INPUT A to H) is selected as the
input source (and its button lights).
Operation of mixer controls and other functions affect
the selected input.
These buttons are also used to assign input sources to
tracks (see "Assigning inputs" on page 40).
Top panel
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tascam DP-32 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info