Bedienungsanleitung Tascam DP-32 (Seite 25 von 104) (Englisch)

617894

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

TASCAM DP-32 25

3 – Names and Functions of Parts

, SOLO button/indicator

Press to switch to Solo mode (the button lights). (See

"Solo" on page 45.)

. MUTE button/indicator

Press to switch to Mute mode (the button lights). (See

"Muting tracks" on page 45.)

/ TRACK EDIT button

Press to open the

TRACK EDIT

screen. (See

"Overview of track Editing" on page 57.)

! VIRTUAL TRACK button/indicator

Press to open the

VIRTUAL TRACK

screen. (See

"Virtual tracks" on page 56.)

@ BOUNCE button/indicator

Press to switch to Bounce recording mode (the button

lights). (See "Bouncing tracks" on page 50.)

# MIXDOWN/MASTERING button/indicator

Press to cycle through the

Multi Track

Mixdown

and

Mastering

modes. Mastering mode is only

available when there is a master track. (See "Mixing

down tracks" on page 64, "Creating a master file" on

page 65, "Checking the master file" on page 66 and

"Using the mastering tools" on page 66.)

NOTE

The current mode is shown on the Home screen.

$ METRONOME button/indicator

Press to set the metronome.

The button flashes in time with the set tempo. (See

"Metronome" on page 70.)

% UNDO/REDO button/indicator

Press to undo the immediately previous action (single

undo) or to cancel the last undo (redo). (See "Undoing

an operation" on page 47.)

After a single or multiple undo, the UNDO/REDO

button lights, showing that an operation has been

undone.

^ MONITOR SELECT button

Press to open the

MONITOR SELECT

pop-up

window on the Home screen. (See "Monitor selection"

on page 42.)

& MONITOR LEVEL knob

Use this knob to adjust the level of the signals output

from the MONITOR OUT jacks.

* MARK SET button

During recording or playback, press to set a mark

manually. (See "Setting a location mark" on page 51.)

( AUTO PUNCH button/indicator

Press to turn automatic punching on and off.

When auto punch is on,

Auto Punch

appears on the

Home screen. (See "Automatic punching in and out"

on page 54.)

) IN button

Press to locate the IN point.

Press and hold the MARK SET button and press to set

the IN point.

Press and hold the JUMPBACK (PREVIEW) button and

press this to start pre-roll playback up to the current

position where it stops. (See "Previewing cue points"

on page 54.)

Q REHEARSE button/indicator

Use this button to turn Rehearse mode on and off.

In addition to auto punch in/out, you can also use

the Rehearse mode for ordinary recording. (See

"Rehearsing a recording" on page 45.)

W OUT button

Press to locate the OUT point.

Press and hold the MARK SET button and press to set

the OUT point.

Press and hold the JUMPBACK (PREVIEW) button and

press this to start post-roll playback from the current

position for a set amount of time, then return to the

current position and stop. (See "Previewing cue points"

on page 54.)

E REPEAT button/indicator

Press to this button to turn Repeat Playback mode on

and off. (See "Using repeat playback" on page 53.)

R JUMPBACK (PREVIEW) button

Press to rewind a set number of seconds from the

current position and start playback. (See "Jumpback

playback" on page 53.)

T CD button

Press to open the

menu. (See "14 – Using CDs" on

page 80.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DP-32 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info