Bedienungsanleitung Tascam DP-32 (Seite 45 von 104) (Englisch)

617894

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

TASCAM DP-32 45

6 - Basic Recording

Changing the signal phase

When the phase is inverted due to mic wiring or another

reason, use the PHASE Ø item to correct the phase.

1. Use the CURSOR (5/b/g/t) buttons to move the

cursor to the

PHASE

Ø area.

Phase

2. Turn the JOG/DATA dial to change the signal phase.

Options:

PHASE

Ø unlit (default): Normal phase

PHASE

Ø lit: Inverted phase

Checking the fader level

You can check the level of a track with the

LEVEL

item

of the Mixer screen. You cannot, however, select this item

and adjust the level of a track directly on this display.

NOTE

The fader level indicator shows the actual fader level.

When playing back a track, by default, the positions of the

faders (physical faders) on the top panel and the

fader level

indicators

match, but a fader group or MIDI command sent

by a remote control to the unit could cause them to differ.

In this case, when you move a physical fader, the

fader level

indicator

will respond to and match the physical fader value,

and thereafter the physical fader will control the level again.

CAUTION

In such cases, a sudden level change could occur.

Setting levels sent to stereo buses

You can adjust the levels sent to stereo buses

independently for each input (INPUT A to H).

1. Use the CURSOR (5/b/g/t) buttons to move the

cursor to the

LEVEL

area.

Fader level indicator

2. Turn the JOG/DATA dial to adjust the level.

Setting range:

inf

+6.0dB

Solo

Press the SOLO button to enable Solo mode. The SOLO

button lights when this mode is active.

In Solo mode, the REC button of each track works as a

SOLO button, so you can monitor the signal of the desired

track.

When Solo mode is active, only tracks that have lit REC

buttons can be heard. All other tracks are muted.

1. When the Home screen is open, press the SOLO

button to enable Solo mode.

In Solo mode, the SOLO button is lit.

2. Press the REC button for the track you want to solo.

(You can solo multiple tracks at the same time.)

When Solo mode is activated, the MUTE indicator of

the track whose REC button was pressed lights.

To cancel soloing

In Solo mode, press the SOLO button or the REC button

of the soloed track.

When Solo mode is deactivated, the MUTE indicators of

soloed tracks turn off.

Muting tracks

1. Press the MUTE button to enter Mute setting mode.

In Mute setting mode, the MUTE button lights.

2. Press the REC button for a track that you want to

turn muting on/off.

When muted, the MUTE indicator of that track lights.

To cancel muting

Press the MUTE button to enter Mute setting mode.

Press the REC button of a muted track to unmute it (and

turn its MUTE/SOLO indicator off).

NOTE

If you solo a muted track, you can hear its sound, but its

muted status is retained. So, it will be muted again when you

end soloing.

Rehearsing a recording

This unit has a recording rehearsal function, so you can

rehearse without actually recording.

The rehearsal function is especially useful for auto

punch recording and other recording operations. (See

"Automatic punching in and out" on page 54.)

In a rehearsal mode, monitoring and other recording

operations are the same as during actual recording, but

input signals are not recorded.

To rehearse, press the REHEARSE button so that the

button lights.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DP-32 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info