Bedienungsanleitung Tascam DP-32 (Seite 62 von 104) (Englisch)

617894

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

62 TASCAM DP-32

9 - Using Internal Effects

Guitar effects

This unit has multi-effects for guitar. You can insert and

use these effects on tracks.

Inserting a guitar effect

Press the EFFECT button to open the

GUITAR EFFECT/SEND EFFECT

screen (the last

displayed effect appears).

If the

SEND EFFECT

screen is open, press the

(

GUITAR

) button to open the

GUITAR EFFECT

screen.

If there is any effect already inserted on a track, the

SELECT button lights and the track number appears in

the upper right corner of the screen.

If no effect has been inserted, the SELECT button is unlit,

and

TRACK --

appears in the upper right corner of the

screen.

Press the SELECT button of a track to insert the effect on

it.

You can also align the cursor with

INSERT EFFECT

the Mixer screen and use the JOG/DATA dial to turn the

effect on/off.

NOTE

A guitar effect has a mono input and a mono output, but

when inserted on a stereo track, it can have a stereo output

and some types will have a stereo effect.

CAUTION

Since guitar effects are mono, when they are inserted

on stereo tracks, the effect is sent only to the odd-

numbered track. (See the illustration below.)

•

For example, when inputs G and H are assigned to

stereo track 9/10 and you insert a guitar effect, the

effected sound will be recorded on track 9 (input G).

•

Since some effects work in stereo, we recommend

that you set the track type to stereo, and then assign

the same input to both odd and even numbers. (For

example, assign input H/H to tracks 9/10.)

Odd track

Mono input

Stereo input

Even track

Odd track

Even track

EFFECT

Adjusting guitar effects

You can edit the parameters of the selected guitar effect.

The parameters differ depending on the effect type.

Press the F3 (

SELECT

) button to select the effect that

you want to edit.

Use the CURSOR (5/b/g/t) buttons to select the

parameter that you want to change, and then use the

JOG/DATA dial to set the value.

Select whether to apply the effect during recording or

during playback with the

POSITION

parameter on the

Guitar Effect screen.

Loading guitar effect settings

1. On the Guitar Effect screen, press the F2 (

LIBRARY

)

button to open the library list.

2. Use the JOG/DATA dial to select the effect setting

that you want to load, and then press the F4 (t)

button.

3. The setting is loaded and the library list closes, but

the Guitar Effect screen stays open.

Press the F1 (g) button to return to the Guitar Effect

screen without loading a setting.

NOTE

Factory preset settings are stored in the

PRESET

category, and user settings are stored in the

USER

category.

Saving guitar effects in the library

You can save adjusted effect settings as a user setting in

the library.

1. When the Guitar Effect screen is open, press the

F2 (

LIBRARY

) button to open the PRESET/USER

library list.

Use the JOG/DATA dial to select the USER area, and

then press the F3 (

SAVE

) button.

NOTE

The library list has a

PRESET

category and a

USER

category. PRESET area data cannot be overwritten.

2. Enter a name, if necessary.

Names in the PRESET library cannot be changed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DP-32 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info