Bedienungsanleitung Tascam DP-32 (Seite 80 von 104) (Englisch)

617894

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

80 TASCAM DP-32

14 - Using CDs

Using the CD drive

This unit has a CD drive that supports writing to CD-R

and CD-RW discs. In addition to playing back audio CDs

(CD-DA discs), the unit's CD drive can also be used for the

following purposes.

•

Create audio CDs from master files

•

Import tracks from audio CDs into the current song

NOTE

Standard audio CDs are 16-bit, 44.1kHz format.

If you make an audio CD using a master file of a song that

was created with different settings, it will automatically be

converted to 16-bit, 44.1kHz format.

Preparations before using CDs with

this unit

When using CDs with this unit, make the following

preparations.

•

Before using a CD, change the recorder to

Multi Track

mode. In modes other than

Multi Track

, you cannot open the

menu.

Mixdown

Mastering

mode, press the

MIXDOWN/MASTERING button repeatedly until the

unit switches to

Multi Track

mode.

Bounce

mode, press the BOUNCE button to switch

Multi Track

mode.

•

Open the

menu before inserting or ejecting a CD.

In order to prevent the sound of the CD drive being

operated during recording, for example, the power

to the drive is disabled when in modes other than CD

mode. For this reason, it is necessary to put the unit

into CD mode in order to load or eject a CD. Even in CD

mode, a CD cannot be loaded or ejected after being

loaded, unless the

menu is open.

Since CDs are unmounted when screens other than the

CD menu are open, use the CD menu or

CD PLAY/

IMPORT

screen to load or eject a CD.

Compatible CD types

This unit is compatible with 12cm and 8cm CD, CD-R,

CD-RW and CD-RW High Speed discs. This unit does not

support CD-RW Ultra Speed or CD-RW Ultra Speed+ discs.

For the functions that can be used with different types of

discs, see the "Media Compatibility Table" on page 87.

Writing to an already written CD-RW

With this unit, you do not need to erase a CD-RW

beforehand. You can use a previously written CD-RW by

erasing it at the beginning of the desired operation.

When creating an audio CD, the following message will

appear if you load an already written CD-RW disc.

Conrmation message

Press the F2 (

Yes

) button to erase the data previously

recorded on the disc.

If you do not want to erase the CD-RW disc, press the F1

(

) button. The disc tray will open slightly. Pull the tray

out and replace the disc with another one.

CAUTION

If you use Track At Once to write a master file to an

unfinalized CD-RW in audio CD format (a CD-RW created

by selecting a single master file on the

MASTER WRITE

screen and setting

FINALIZE

OFF

), the file will be

added without showing the CD-RW erasure warning,

and it will not overwrite existing data on the disc.

Loading and ejecting CDs

Place the disc on the disc tray at the front of the unit.

1. When in

Multi Track

mode, press the CD button

to open the

menu.

2. Press the F3 (-) button or the disc tray eject

button on the front panel to open the tray slightly.

Pull the tray out until it opens completely as shown

below.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DP-32 Seite 80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info