Bedienungsanleitung Tascam dr 1 (Seite 19 von 43) (Englisch)

152393

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

TASCAM DR-1 19

8–Recording

Selecting the file type and sampling frequency

Setting the maximum file size

In addition to using the built-in microphone, you can

record using an external microphone or record the

output signal from a mixer or other audio source. You

can select among MP3 (44.1/48 kHz, 32–320 kbps)

and WAV (44.1/48 kHz, 16/24-bit) audio recording

formats. Moreover, with this unit, you can mix and

record a sound input through the built-in mic or one of

the input jacks with an audio le that is played back

using the overdubbing function.

Select the audio le type that you want to record

before you start recording.

1 Press the MENU key to open the Menu Screen.

2 Select the

REC SETTING

item to open the

Recording Settings Screen.

3 Use the

FORMAT

item to select the file type from

the following options: WAV at 16-bit (factory

setting) or 24-bit, or MP3 at 32 kbps, 64 kbps, 96

kbps, 128 kbps, 192 kbps, 256 kbps, or 320 kbps.

4 Use the

SAMPLE

item to select a sampling

frequency of 44.1 kHz (factory setting) or 48 kHz.

NOTE

For overdubbing, set the ﬁle type to WAV. You cannot •

use overdubbing when the setting is MP3. (See

“Overdubbing” on page 23.)

TIP

WAV ﬁles do not use data compression and are truer to •

the character of the sound, but they use much memory.

Since MP3 ﬁles use data compression, they do not use

nearly as much memory. For example, ordinary audio

CD tracks are 16-bit, 44.1 kHz WAV ﬁles. A 3.5–minute

CD track uses about 35 MB of space when copied to a

hard drive. The same track converted to a 128 kbps MP3

ﬁle uses only about 3.2 MB.

If you are making a recording that you intend to use in •

the production of a CD, it is a good idea to record WAV

ﬁles. If you have enough space, 24-bit recording gives

you extra head room, allowing you to capture a greater

dynamic range. When recording rehearsals, lectures

and songwriting ideas, for example, and higher quality

audio is not as important as smaller ﬁle size, MP3 may

be a better choice. There are many excellent books (and

resources on the Internet) about digital recording if you

want to learn more about these formats.

On the Recording Settings Screen, where you select

the audio le type as described above, you can also

set the maximum size of the audio le. Recording

automatically stops if the maximum le size is

reached while recording audio.

1 Press the MENU key to open the Menu Screen.

2 Select the

REC SETTING

item to open the

Recording Settings Screen.

3 With the

SIZE

item, select the maximum file size

from the following options: 64 M, 128 M, 256 M,

512 M, 1 G and 2 G (factory setting)

Under the file size value, the possible recording time

for the selected size, format and sample rate appears.

NOTE

For the same ﬁle size, the possible recording time differs

depending on the ﬁle type selected. Furthermore, if the

possible recording time is 24 hours or more, this will be

displayed as 23:59:59.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam dr 1 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info