Bedienungsanleitung Tascam DR-680MKII (Seite 12 von 60) (Englisch)

617909

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

TASCAM DR-680MKII

2 – Names and Functions of Parts

Turn this knob while pressing the HOME/DISPLAY

button on the front panel to adjust the display

contrast.

When the

screen is open, this dial can be used

for the same functions as the DATA wheel and pressing

this dial has the same function as the ENTER/MARK

button.

When the Home Screen is open, press to set a mark.

When the Home Screen is open, turn to skip to a mark.

When the

screen is open, press to move the

cursor left or right.

When the

screen is open, turn to move the cursor

or change a setting value.

d PAUSE button and indicator

Press when stopped or recording to start recording

standby. The indicator lights when in recording

standby.

Press when in recording standby to stop recording

standby.

NOTE

The PAUSE button on the front panel functions only

when recording. Use the PLAY/PAUSE button on the top

of the unit to pause playback.

f REC button and indicator

Press when stopped or in recording standby to start

recording. The indicator lights when recording or in

recording standby.

Press this button when recording to end the current

take and continue recording a new take without pause.

g REC TRIM button

Press to open the input

TRIM

settings screen.

When the input

TRIM

settings screen is open, press to

close it and open the Home Screen.

h MIX LEVEL button

Press to open the

LEVEL

settings screen.

Press when the

LEVEL

settings screen is open to close

it and return to the Home Screen.

j Channel number buttons (1–6 buttons)

Use these to select tracks on the

TRIM

LEVEL

and

PAN

settings screens.

Press when in recording standby to arm/disarm that

track for recording.

On the Functions Screen, press to turn the selected

function ON or OFF for that track.

Press and hold to enable/disable solo monitoring of

that track.

k MIX [LOCK] button

When the

LEVEL

screen is open, this selects the stereo

track as the track to be controlled. Press and hold this

button to engage or disengage the lock function,

which disables the use of other buttons.

Left side panel

l MIC/LINE INPUTS (XLR/TRS) jacks

These are balanced analog XLR/TRS combo jacks for

microphone and line level inputs (1: GND 2: HOT 3:

COLD, Tip: HOT Ring: COLD Sleeve: GND).

; MIC/LINE INPUTS (TRS) jacks

These are balanced analog TRS jacks for microphone

and line level inputs (Tip: HOT Ring: COLD Sleeve:

GND).

CAUTION

•

Confirm that phantom power is OFF before connecting

a line level device to a MIC/LINE INPUTS jack. If you

connect a line level device while phantom power is

being supplied, that device and this unit could be

damaged.

•

When using a condenser microphone, before

connecting to and disconnecting from a MIC/LINE

INPUTS jack, confirm that the phantom power for that

jack is OFF. If you connect or disconnect a mic while

phantom power is being supplied, that mic and this

unit could be damaged.

•

Do not connect an unbalanced dynamic mic to an XLR

connector when phantom power is being supplied.

Doing so could damage that mic and this unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DR-680MKII Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info