Bedienungsanleitung Tascam DR-680MKII (Seite 15 von 60) (Englisch)

617909

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

TASCAM DR-680

2 – Names and Functions of Parts

Home Screen

1 Take name

When stopped or during playback, the name of the

currently loaded take is shown.

When recording or in recording standby, the name of

the take being recorded is shown.

Up to 11 characters are shown. Longer names are

scrolled.

2 Recorder operation status

The operation status of the recorder is shown with one

of the following icons.

: Stopped

: Playing back

: Paused

: Searching forward

: Searching backwards

: Recording

: Recording standby

: Skip forward

: Skip backward

3 Repeat icon

When the repeat function is ON, the repeat icon

appears.

4 Power supply status

When operating on battery power, a battery icon

appears.

Depending on the amount of remaining battery power,

a number of bars appear ( , or ).

When the battery charge is very low, the last bar disap-

pears, the icon blinks, and the unit’s power will

soon change to standby.

When using the included AC adaptor (GPE248-

120200-Z), the icon appears.

NOTE

Even before the batteries lose their charge, a “Battery

Low” warning pop-up message might appear if you try

to start recording or conduct another operation that

requires considerable power.

5 Level meters

These show the levels of tracks 1–6 and the stereo

track.

When recording, if stereo track recording is ON and the

stereo track recording source is set to DIGITAL IN, the

stereo track meters become the DIGITAL IN input level

meters.

During playback of a multitrack file, the playback levels

of each track are shown.

When recording, the recording levels of each track are

shown.

When recording, if a signal is distorted at the input

stage, the area beneath its meter is highlighted.

If a recording level exceeds 2.0 dB below the maximum

level, a mark appears at the top of its meter, indicating

an overload.

Ch2: Signal is distorted at the input stage

Ch4: Recording level exceeds 2.0dB less than the

maximum level.

During stereo track playback, the meters for tracks 1

and 2 function as the L and R meters.

When a track is armed for recording, “º” appears

beneath its meter.

When a track is soloed, “ ” appears beneath its meter.

NOTE

If a track is both armed for recording and soloed, only

“ ” appears beneath its meter.

6 Time (hours: minutes: seconds)

During playback, the elapsed playback time of the take

is shown.

Press the HOME/DISPLAY button on the front panel

to show the remaining time of the take as a negative

number.

When recording, the elapsed recording time of the take

is shown.

Press the HOME/DISPLAY button on the front panel

to show the remaining available recording time for the

take.

7 Playback position

This bar shows the current playback position during

playback or the amount of remaining time available for

recording during recording. As recording or playback

progresses, the bar darkens from the left.

8 Mark information

The mark number and the total number of marks in the

current take are shown.

During playback, the number of the mark that is before

and closest to the current position is shown.

When recording, the last added mark number is shown.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DR-680MKII Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info