617909
25
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
TASCAM DR-680
25
4 – Recording
Setting the sampling frequency
You can set the sampling frequency and record BWF and
WAV files at 44.1, 48, 96 or 192 kHz.
1. Press the MENU button to open the
REC
page of the
MENU
screen.
2. Use the DATA wheel to select the
SAMPLE
item, and
press the ENTER/MARK button.
3. Use the DATA wheel to select one of the following
options:
44.1kHz
(default value),
48kHz
,
96kHz
, or
192kHz
.
NOTE
When the file format is MP3, 96 kHz and 192 kHz
cannot be selected.
4. Press the MARK (.) button to return to item
selection on the
MENU
screen.
5. Press the HOME/DISP button to return to the Home
Screen.
Setting the file recording mode
The file recording mode can be set to a monaural file, a
stereo file or a 6-channel file.
1. Press the MENU button to open the
REC
page of the
MENU
screen.
2. Use the DATA wheel to select the
FILE
item, and press
the ENTER/MARK button.
3. Use the DATA wheel to select one of the following
options:
MONO
,
STEREO
(default value), or
6ch
.
NOTE
When set to MONO, a mono file is created for each
recorded track. When set to STEREO, a stereo file is
created for each pair of tracks (1-2, 3-4 and 5-6). When
set to 6ch, one 6-channel file is created for tracks 1-6.
6ch cannot be selected when the file format is set to
MP3 or the sampling frequency is set to 192 kHz.
When dual recording is enabled, only MONO can be
selected. (See “Enabling dual recording” on page
31.)
Press the MARK (.) button to return to item
selection on the
MENU
screen.
4. Press the HOME/DISP button to return to the Home
Screen.
Stereo track recording settings
You can set what is recorded on the stereo track.
1. Press the MENU button to open the
REC
page of the
MENU
screen.
2. Use the DATA wheel to select the
ST
REC
item, and
press the ENTER/MARK button.
3. Use the DATA wheel to select one of the following
options.
MIX
(default): Record a mix of the 6 inputs on the
stereo track.
DIN
: Record the signal from the DIGITAL/
SYNC IN input jack on the stereo track.
4. Press the MARK (.) button to return to item
selection on the
MENU
screen.
5. Press the HOME/DISP button to return to the Home
Screen.
Arming and disarming tracks for
recording
Tracks can be armed and disarmed for recording from the
MENU
screen.
1. Press the MENU button to open the
REC
page of the
MENU
screen.
2. Use the DATA wheel to select (highlight) the
TRACK
item, and press the ENTER/MARK button.
3. Use the channel number (1–6) buttons on the front
panel to arm/disarm recording for the corresponding
tracks. When a track is armed for recording, its track
number appears light on a dark background.
4. Press the MARK (.) button to return to item
selection on the
MENU
screen.
5. Press the HOME/DISP button to return to the Home
Screen.
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tascam DR-680MKII wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info