Bedienungsanleitung Tascam DR-680MKII (Seite 48 von 60) (Englisch)

617909

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

TASCAM DR-680MKII

9 – Other Settings and Information Display

GANG function

The GANG function allows you to adjust multiple channels

at the same time on the

TRIM

PAN

and

LEVEL

screens.

Set the range of channels to be ganged by pressing the

channel number (1–6) buttons for the channels at both

ends of the range at the same time.

For example, to gang channels 3–5, press the 3 and 5

buttons at the same time. When you do so, channels

will appear selected on the screen as shown in the

illustration below.

You can create multiple gangs of channels by setting each

gang separately. However, no channel can be part of more

than one gang.

When ganged, you can adjust parameters for the ganged

channels at the same time.

If the parameter setting for any of the ganged channels

reaches its maximum or minimum value, turning the

VALUE/MARK knob in the same direction will not further

increase or decrease the other channel parameters.

If you press and hold the VALUE/MARK knob while

multiple channels are selected, the parameter values for all

of the ganged channels will be set to the lowest value of

the channels.

Any of the following actions will deactivate the GANG

function.

•

Press any button that corresponds to a channel that is

currently ganged.

•

Put the unit power in standby.

•

Activate or Deactivate MS decoding.

•

Use the INITIALIZE function.

When using the GANG function, the ganged channels are

the same on the

TRIM

PAN

and

LEVEL

screens. However,

channels that have been set to use mid-side decoding

cannot be ganged or unganged on the

PAN

and

LEVEL

screens.

NOTE

•

You cannot gang channels that are set to use MS

decoding with channels that are not. However, you can

gang such channels separately.

•

You cannot gang channels that are set to use different

types of MS decoding.

•

When designating a range that includes multiple

channel pairs set to use MS decoding, only the

channels in the pair with the lowest number is ganged.

•

If only one of the channels in a pair set to use MS

decoding is included in the range, none of the channels

will be ganged together.

•

When dual recording is enabled, the GANG function

cannot be used. (See “Enabling dual recording” on

page 31.)

Output settings

You can make settings related to analog and digital output.

Analog output settings

You can set the LINE OUTPUT jacks to directly output the

sound of each track or to output the stereo mix sound.

When set to output the MIX, the left and right channels of

the stereo track are output through the analog output jack

1/2, 3/4 and 5/6 pairs.

1. Press the MENU button to open the

I/O

page of the

screen.

2. Use the DATA wheel to select the

LINE OUT

item, and press the ENTER/MARK button.

3. Use the DATA wheel to set it to

1- 6

(default value) or

MIX x3

1- 6

: The sound of each channel is output directly.

MIX x3

: The stereo signal mixed by the internal mixer

is output.

4. When you have finished making the setting, press the

HOME/DISP button to return to the Home Screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DR-680MKII Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info