Bedienungsanleitung Tascam DR100 MKII (Seite 17 von 60) (Englisch)

490765

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

TASCAM DR-100MKII

Loop playback IN (starting) and OUT (ending)

points

The settings of loop playback starting (IN) and ending

(OUT) points are shown. When the starting (IN) point

is set, the icon appears below the corresponding

position on the playback position bar.

When the ending (OUT) point is set, the icon

appears below the corresponding position on the

playback position bar

Playback file number/total number of files

The total number of les in the playback area and the

number of the current le are shown.

Monitoring output

Depending on the status, one of the following icons

appears.

Sound output from the headphone jack

Sound output from the speaker

Recording screen

1 Stereo/mono setting

When recording with mics, this icon shows whether

recording is in stereo or mono.

Stereo

Mono

Prerecording setting

The icon appears when the prerecording function

is “ON” and the unit is in recording standby.

Low-cut filter ON/OFF setting

This icon shows whether the low-cut lter is ON or OFF.

When set to

40Hz

80Hz

120Hz

, the icon appears as

light letters on a dark background.

OFF

40 Hz low-cut lter ON

80 Hz low-cut lter ON

120 Hz low-cut lter ON

Auto gain control/limiter setting

Auto gain control OFF

Auto gain control ON

Limiter OFF

Limiter ON

5 Elapsed/remaining recording time

This shows the elapsed time of the le being recorded

or the remaining time (hours: minutes: seconds)

according to the set maximum le size. If the remaining

time available on the SD card is less, however, that will

be shown instead.

When in recording standby or recording, press the

HOME button to switch between the elapsed recording

time and the remaining recording time. When the

remaining recording time is shown, a “–” appears

before it.

6 Recorder operation status

This icon shows the recorder operation status.

Icon Meaning

Recording standby

Recording paused

Currently recording

Level meters

These show the levels of the input signals. When

overdubbing is on, the levels of the combined input

and playback signals are shown. On the scale, the b

mark indicates a level of −16 dB to help you adjust the

analog input level.

File name

This shows the le name that will automatically be

given to the le being recorded.

Input signal setting

This icon shows the signal being input.

XLR (MIC/LINE 1) IN L/R

UNI MIC L/R (directional)

OMNI MIC L/R (omnidirectional)

LINE 2 IN L/R

0 SD card remaining recording time

This shows the remaining recording time (hours:

minutes: seconds) on the SD card in the recorder.

Peak value in decibels (dB)

The peak recording level is shown in decibels.

w Recording file type/bit length/sampling frequency

This shows the format, bit length and sampling

frequency of the le being recorded.

2 – Names and Functions of Parts

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DR100 MKII Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tascam DR100 MKII

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info