Bedienungsanleitung Tascam DR100 MKII (Seite 49 von 60) (Englisch)

490765

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

TASCAM DR-100MKII

8 – Settings and Information

Battery information page (BATTERY)

On the

BATTERY

page, usage information about the

batteries in the recorder is shown.

Li-Ion:

Shows the amount of power remaining in the recorder’s

lithium-ion rechargeable battery.

The number to the right of the icon shows whether this

is being used as the main (

) or secondary (

) battery power

source.

AA:

Shows the amount of power remaining in the recorder’s

AA batteries. The number to the right of the icon shows

whether this is being used as the main (

) or secondary (

)

battery power source.

ALKALI

Ni- M H

shows the type of AA batteries in the

recorder.

Alkaline batteries:

ALKALI

Ni-MH batteries:

Ni- M H

NOTE

When using an AC adaptor or TASCAM BP-6AA external

•

battery pack, the icon is always shown instead of

the remaining charge in the lithium-ion rechargeable

battery.

When the lithium-on battery is set as the main battery

•

and is in use, the remaining charge of the AA batteries

might not be shown correctly depending on other

conditions. (See “Setting the main battery source (MAIN)”

on page 50.)

Operation settings (SETUP)

On the

SETUP

screen, you can make various settings

to make the unit easier to operate according to the

environment where you are using it and other conditions.

On this screen you can also initialize the unit and format SD

cards.

Follow these procedures to open the

SETUP

screen.

1 Press the MENU button to open the

screen.

2 Use the wheel to select the

SETUP

menu and press

the ENTER/MARK button to open the

SETUP

screen.

Use the items on the

SETUP

screen to make the

following settings.

Use the . and / buttons and the wheel to set each

item.

Search speed setting

CUE/REV SPD

sets the forward and backward search speed

used when you press and hold the .// buttons.

Setting options:

(default),

X10

Automatic power OFF setting

AUTO OFF

sets the amount of time until the recorder turns

OFF automatically after the last action or operation when

running on battery power.

Setting options:

OFF

(default, does not turn off

automatically),

3min

5min

10min

30min

Automatic backlight OFF setting

BACKLIGHT

sets the amount of time until the backlight

turns OFF automatically after the last operation when

running on battery power.

Setting options:

OFF

(always unlit),

5sec

(default),

10sec

15sec

30sec

ALWAYS

(always lit)

Display contrast setting

CONTRAST

sets the display contrast.

Setting range:

–

(default value:

)

Backlight brightness setting

DIMMER

sets the backlight brightness.

Setting options:

HIGH

(default),

LOW

Restoring default settings

Use the

INITIALIZE

item if you want to restore the various

settings of this device to their factory defaults.

1 Use the wheel to select

INITIALIZE

and press the

ENTER/MARK button to select

Exec

2 Press the ENTER/MARK button again to open a

confirmation popup message.

3 Press the ENTER/MARK button again to initialize

the recorder. Press the STOP [8] button to cancel

initialization.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DR100 MKII Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tascam DR100 MKII

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info