Bedienungsanleitung Tascam HS-2 (Seite 109 von 132) (Englisch)

617907

109

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

TASCAM HS-2 109

Mark functions

Adding marks

Use the following methods to create marks.

One timeline mode or one take can have a maximum of

99 marks, including automatically-created marks.

Push the MARK key on the front panel.

Press the MARK key to add a mark at that playback/

recording time. In timeline mode, marks are added to the

timeline and file itself.

Mark names are in the format “

MARK XX

”.

Use the auto marker function

When the auto marker function is ON, marks can be

added upon PREREC start/ recording start / end when

audio overs occur, at regular time intervals and when

synchronization errors occur (see “OPTIONS page” on page

90.)

In timeline mode, marks are added to the timeline and file

itself.

Marks are named according to how they were made.

When auto marks are made Mark name

When audio over occurs

OVER xx

At every time interval

TIME xx

When a synchronization error

occurs

UNLK xx

CAUTION

The following auto marks are only added to the file (take),

and will not appear in the timeline in timeline mode.

When auto marks are made Mark name

Recording start point

REC xx

Recording end point

END xx

Pre-recording start point

PRE xx

NOTE

•

“Audio Over” occurs when the level exceeds the

maximum level (full scale) minus the value set by the

user. (In the example above, this would be when the

level exceeds the maximum level minus 0.20 dB.)

•

If a mark is triggered using parallel control, a mark is

added in the same manner as if the MARK key had

been pushed.

•

When an Audio Over or Synchronization Error auto

marker is added, an additional event of that same

type will not cause a mark to be added until at least 10

seconds have passed.

Using keys to locate to marks

Press the . [MARK .] or / [MARK /] key

while pressing and holding the SHIFT key to locate to the

previous or next mark.

NOTE

If MARK SKIP +/– is input using parallel control, the unit

will locate to the next or previous mark.

Mark list screen

Touch the

Mark List

button on the Home Screen to

open the

MARK LIST

screen.

NAME buttons

Touch to sort by mark name in descending or ascending

order.

When the mark names are sorted in ascending order, a 

icon appears inside the

NAME

button. When in descending

order, a  icon appears inside this button.

TIME buttons

Touch to sort marks by time in descending or ascending

order. When they are sorted by time in ascending order,

a  icon appears inside the

TIME

button. When in

descending order, a  icon appears inside this button.

Mark name buttons

Touch to select a mark.

LOCATE ( ) buttons

Touch one of these to locate to the corresponding mark.

LIST INFO button

Touch this to see a list of the number of marks by type in

the currently selected take.

11–Mark and locate functions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam HS-2 Seite 109

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info