Bedienungsanleitung Tascam HS-20 (Seite 13 von 128) (Englisch)

617906

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

TASCAM HS-20

Rear panel

g ANALOG IN L/R (UNBALANCED) connectors

These RCA pin jacks are analog unbalanced inputs (L/R)

The rated input level is −10dBV.

h ANALOG IN L/R (BALANCED) connectors

These XLR connectors are balanced analog inputs (L/R)

The rated input level is +4dBu. (1: GND, 2: HOT, 3: COLD)

j DIGITAL IN (S/PDIF) connector

This connector is an unbalanced input for digital audio in

IEC60958-3(S/PDIF) and AES3-2003/IEC60958-4 (AES/EBU)

formats.

Sampling frequencies of 88.2 kHz and 96 kHz are trans-

mitted at double speed, and 176.4 kHz and 192kHz are at

quadruple speed.

This unit is equipped with a sampling rate converter which

supports 32 kHz to 192 kHz.

k DIGITAL IN (AES/EBU) connector

This connector is an XLR balanced input for digital audio in

AES3-2003 / IEC60958-4 (AES/EBU) and IEC60958-3 (S/PDIF)

format.

Sampling frequencies of 88.2 kHz and 96 kHz are trans-

mitted at double speed, and 176.4 kHz and 192kHz are at

quadruple speed.

This unit is equipped with a sampling rate converter which

supports 32 kHz to 192 kHz.

l REMOTE connector

Connect a TASCAM RC-HS20PD remote control (sold

separately) here.

NOTE

A protective cover is attached to this connector when

shipped from the factory. Remove the cover to use the

connector.

CAUTION

This is not an Ethernet connector (LAN, etc.). Never connect

this to a network using an Ethernet cable.

Doing so could damage this unit or equipment in the

network.

; RS-232C connector

This is a 9-pin D-sub connector for RS-232C serial control.

Connect an external controller, for example, here.

NOTE

It cannot be used at the same time as the RS-422 connector.

(See “RS–232C page” on page 85.)

z PARALLEL connector

This is a 25-pin D-sub connector for parallel control.

Connect a TASCAM RC-SS20 or another external controller

here.

x AC IN connector

Connect the included power cord here.

c ANALOG OUT L/R (UNBALANCED) connectors

These RCA pin jacks are analog unbalanced outputs (L/R).

Their rated output level is −10 dBV.

v ANALOG OUT L/R (BALANCED) connectors

These XLR connectors are balanced analog outputs (L/R).

Their rated output level is +6 dBu when Digital Ref. Level is

set to −9dBFs and +4dBu in other cases. (1: GND, 2: HOT, 3:

COLD)

b DIGITAL OUT (S/PDIF) connector

This connector is an unbalanced output for digital audio in

IEC60958-3(S/PDIF) format.

Sampling frequencies of 88.2 kHz and 96 kHz are trans-

mitted at double speed, and 176.4 kHz and 192kHz are at

quadruple speed.

n DIGITAL OUT (AES/EBU) connectors

This connector is an XLR balanced output for digital audio in

AES3-2003/IEC60958-4 (AES/EBU) format.

Sampling frequencies of 88.2 kHz and 96 kHz are trans-

mitted at double speed, and 176.4 kHz and 192kHz are at

quadruple speed.

m RS-422 connector (attached to optional SY-2 board)

This is a 9-pin D-sub connector for RS-422 serial control.

Connect an external controller, for example, here.

NOTE

This cannot be used at the same time as the RS-232C

connector. (See “RS–422 page” on page 86.)

, TIME CODE IN/OUT connectors (attached to optional

SY-2 board)

These BNC connectors are for SMPTE timecode input and

output.

. WORD/VIDEO IN connector

This BNC connector is for input of word clock and video

reference signals. Use this to input a word clock signal

(44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz or 192 kHz)

or a video reference signal (NTSC/PAL black burst or HDTV

Tri-Level).

Use the switch to set whether or not to terminate with 75Ω.

/ WORD/VIDEO THRU/WORD OUT connector

2 – Names and functions of parts

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam HS-20 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info