Bedienungsanleitung Tascam HS-20 (Seite 30 von 128) (Englisch)

617906

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

TASCAM HS-20

5 – FILE LIST

Explanation of folder structure

This unit manages audio files in audio folders.

Each SD/CF card has an "HS Files" folder that holds audio folders

that contain audio files (which are called "takes") in groups.

Folder structure

The folder structure is as shown below.

You can check the SD/CF card folder and file structure by

accessing it from a computer using a card reader, for example.

Be aware, however, if you change or erase files inside a folder,

or change any names, the unit might not be able to play the

contents of that folder.

NOTE

Other management files and folders are also created.

File names

The format used in naming files is as follows.

[Take name first half]-[letter][take number].wav

ROOT

├─

HS Files

│ │

│ ├─

Audio001

│ │ │

│ │ ├─ defaultAES.adl

│ │ ├─

Audio001-T001.wav

│ │ ├─ Audio001-T002.wav

│ │ │ :

│ │ ├─ Audio001.adl

│ │ │

│ │ └─

_playlists

│ │ │

│ │ ├─ defaultPPL.ppl

│ │ ├─ Playlist01.ppl

│ │ ├─ Playlist02.ppl

│ │ │:

│ │ ├─ exportedPPLFile.ppl

│ │ │:

│ │ ├─ PPLFileforImport.ppl

│ │ │:

This AES31 file is automatically created

This PPL file is automatically created

File formats

This unit can record and play files with the following types of

formats.

File formats: BWF/WAV*

Sampling frequencies: 44.1/48/88.2/96/176.4/192 kHz

Quantization bit depth: 16/24 bits

Number of tracks: 2

*This unit cannot record ordinary WAV files.

(It can only play them.)

FILE LIST screen overview

Press the FILE LIST key on the front of the unit to open the

AES31 file selection, take selection or playlist selection screen

according to the operation mode.

When one of these screens is open, press the FILE LIST key to

open the audio folder selection screen.

When the audio folder selection screen is open, press the FILE

LIST key to open the root folder selection screen.

Root folder selection screen

o Directory display

The current directory level and number of subfolders

within the root folder are shown.

(In the example above, the root directory of the SD card

contains two folders.)

o NUM OF FOLDER column

Shows the total number of folders in the root directory.

o Fs

Shows the sampling frequency setting used when

recording for each folder. The sampling frequency values

are abbreviated as follows.

Sampling frequencies: Fs abbreviation

44.1kHz 44k

47.952 kHz (48 kHz –0.1% pull-down)* 48k–

48.048 kHz (48 kHz +0.1% pull-up)* 48k+

88.2kHz 88k

176.4kHz 176k

*This unit is not compatible with 47.952/48.048kHz

recording/playback. When loaded, "Unsupported Fs."

appears in a pop-up and recording and playback are

disabled.

o ENTER button

Touch the e button for the current folder (the letter

“C” appears in the icon, which is also highlighted

yellow) to view its contents.

If you touch the e button for any folder other than the

current folder, a pop-up window will appear confirming

that you want to load that folder. Touch the OK button

to show the contents of that folder after it completes

o Folder Name button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam HS-20 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info