Bedienungsanleitung Tascam HS-20 (Seite 80 von 128) (Englisch)

617906

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

TASCAM HS-20

10 – Internal settings

OPTIONS page

Make settings related to the pre-recording and auto marks on

this page.

PreREC Time

Turn this function ON or OFF and set the length of pre-recording

time.

(Default: OFF)

When PreREC Time is ON, the signal input during recording

standby is captured by the built-in memory for the set amount

of time, allowing a maximum of 5 seconds to be recorded before

recording is started manually.

To set the pre-recording time, touch the knob, and adjust the

value using the DATA dial.

Setting range: 1–5 seconds (default: 2 seconds)

Auto mark

Make settings related to auto marks.

o Audio Over:

Use this to add markers when the set audio level is

exceeded.

Use this to add markers when the set level is exceeded.

Turn this function ON or OFF and set the detection level.

(Default: OFF)

To set the detection level, touch the knob, and adjust the

value using the DATA dial.

Setting values: –0.20 dB (default), –0.17 dB, –0.13 dB,

–0.10 dB, –0.06 dB, –0.03 dB.

Range: -0.10 dB to -0.06 dB (default: -0.03 dB)

Settings made here are reflected in the Over Level

setting on the METER SETUP screen.

o Time Interval:

Use this to add marks at fixed time intervals. Turn this

function ON or OFF and set the time interval. (Default:

OFF)

To set the time, touch the knob, and adjust the value

using the DATA dial. The setting range is 1–10 minutes

(default: 5 minutes). (default value)

o Sync Unlock:

Use this to add a mark when synchronization with

the master clock is lost. Turn this function ON or OFF.

(Default: OFF)

o PRE/REC/END:

Marks can be added automatically at the pre-record

start, recording start and recording end points. Turn this

function ON or OFF.

(Default: OFF)

NOTE

An "audio over" occurs when the level exceeds the maximum

level (full scale) minus the value set by the user.

(In the example above, this would be when the level exceeds

the maximum level minus 0.20 dB.)

NOTE

The PRE/REC/END auto marks are only added to takes in

take mode. They do not appear on the timeline in timeline

mode.

NOTE

After an Audio Over or Sync Unlock auto mark has been

placed, the same type of mark will not be repeated until at

least 10 seconds has passed.

Playback settings (PLAY SETUP)

Make playback settings on this screen.

GENERAL page

Make various settings related to the playback mode on this

page.

Play Mode

Set how the playback of takes and entries is handled using

the following buttons. This setting affects all modes except

timeline mode.

One Take button:

(default)

Only the currently selected take or

entry is played back.

All Take button: All the takes in the currently loaded

folder or all the entries in the

playlist are played back.

Repeat Mode

Turn repeat playback ON and OFF (default). (Default: OFF)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam HS-20 Seite 80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info