587249
26
Zoom out
Zoom in
Vorherige Seite
1/100
Nächste Seite
26 TASCAM LR-10
2–Names and Functions of Parts
7 Á button (PLAY)
When the Home Screen is open, press when stopped to
start playback.
Press during playback to return to a specific time and
restart playback (flashback function). (See Jump back a
set amount and continue playback (flashback)” on page
71.)
When the
METRONOME
screen is open, press to start and
stop the metronome.
Use during operation of a setting screen to confirm the
selection of an item and to respond “YES” to confirmation
pop-up messages.
Press this button while pressing and holding the RECORD
[º] button to start overdubbing. (See “Recording the
input sound with the playback sound (overdubbing)” on
page 51.)
8 RECORD [º] button/indicator
Press briefly when stopped to start recording. When
recording, the indicator lights. When the auto record
function is ON, press briefly to start recording standby.
When in recording standby, the indicator blinks.
Press and hold when stopped to enable prerecording (2
seconds maximum) and start recording standby. When
in recording standby, the indicator blinks. Press during
recording standby to start recording. When recording, the
indicator lights.
Press the Á button while pressing and holding this
button to start overdubbing. (See “Recording the input
sound with the playback sound (overdubbing)” on page
51.)
On the
DIVIDE
screen, use to execute the division of a file.
9 VALUE (+/–) buttons
Use these to change setting values. Press + to increase the
value or to decrease the value.
Press + and - buttons at the same time to set it to the
default value.
0 OUTPUT (+/–) buttons
Use these to adjust the volume level of the output from
the built-in speaker or the /LINE OUT jack. When using
these buttons, the volume level is shown in a pop-up at
the bottom of the display.
Press + to increase the volume or to decrease the
volume.
q HOME button
Press to return to the Home Screen from one of the setting
screens.
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tascam LR-10 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info