Bedienungsanleitung Tascam MD-CD1MKIII (Seite 38 von 56) (Englisch)

617924

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

38 TASCAM MD-CD1MKIII

Fade-in and fade-out recording

At the beginning and end of MD recording, fade-in and

fade-out effects can be performed.

Before following the procedure below, make sure that

basic recording preparations have been completed, a

recordable disc is inserted, and the deck is in stop mode.

1 Set operation using the following menu options on

the VOL FUNC sub-menu of the MD menu.

FADE IN

The length of the fade in to the normal level can be

set between 1 and 30 seconds in 1-second increments.

(Default setting: 3 seconds).

FADE OUT

The length of the fade out into complete silence

can be set between 1 and 30 seconds in 1-second

increments. (Default setting: 3 seconds).

FADE MODE

The deck can be set to continue recording (“Rec”) or

enter recording standby mode (“Ready”) after fadeout

is completed.

2 In recording standby mode, press the FADER

button on the remote control.

Recording begins and the sound fades in.

After the preset fade-in time, the sound is at normal

level.

3 During recording, press the FADER button on the

remote control when you wish to fade-out the

sound.

Fade-out begins, and after the preset fade-out

time, there is silence. After it becomes silent,

depending upon the Fade mode setting, recording

continues or the deck enters recording standby

mode.

NOTE

Fade-in or fade-out only may be selected.

•

The Prerecording function cannot be performed

•

together with fade-in recording. For details, refer to the

following section.

The unit adjusts the level for fade-in/fade-out in the

•

digital realm, but the volume of the monitor sounds

output through headphones or of signals output

through the ANALOG OUTPUTS terminal or DIGITAL

OUTPUTS terminal does not change.

Prerecording (Time Machine

recording)

This function makes it possible to start recording up to

6 seconds before the time the recording operation is

actually started. It operates by holding the input signal

in a buffer memory that can be set to contain up to 6

seconds of data representing a normal stereo input signal.

Before following the procedure below, make sure that

basic recording preparations have been completed, a

recordable disc is inserted, and the deck is in stop mode.

1 Set the time value for the amount of data to be

stored in the buffer using the

PRE REC?

option

on the REC sub-menu of the MD menu.

Setting values range from 1 to 6 seconds in

1-second increments, as well as OFF. The default

setting is OFF.

OFF: The Prerecording function does not operate.

1 sec to 6 sec settings: The buffer will hold the

corresponding seconds of signal.

2 Press the RECORD button to enter recording

standby mode.

3 Press the PLAY buton to start recording.

The signal will be recorded from the number of

seconds set before the PLAY button is pressed.

4 Press the STOP button to stop recording.

NOTE

When performing fade-in recording (explained in a

previous section), the prerecording function is not

possible.

Overwrite recording

The overwrite recording function allows you to

automatically delete and overwrite a previously recorded

portion after the specified position.

Before following the procedure below, make sure that

basic recording preparations have been completed, a

recordable disc is inserted, and the deck is in stop mode.

1 Locate the point at which you wish to begin

overwrite recording, press the READY button, and

the deck will go into playback standby mode.

To start overwrite recording from the beginning of

a certain track, use the SKIP button or the number

buttons to select the track, then press the READY

button.

To start overwrite recording from the middle of a

certain track, use the SKIP buttons or the number

buttons to select the desired track, then press the

PLAY button to begin playback (you can also use

the Search function). At the desired point, press

the READY button.

9 – MD recording from an external source

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam MD-CD1MKIII Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info