Bedienungsanleitung Tascam SS-CDR100 (Seite 11 von 84) (Englisch)

617918

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

TASCAM SS-CDR200/SS-R200/SS-R100 11

•

To clean the signal side of a disc, wipe gently with a soft

dry cloth from the center towards the outside edge.

Dirt on discs can lower the sound quality, so clean

them and always store them in a clean state.

•

Do not use any record spray, anti-static solutions,

benzene, paint thinner or other chemical agents to

clean CDs as they could damage the delicate playing

surface. It may cause CDs to become unplayable.

•

Do not apply labels or other materials to discs. Do

not use discs that have had tape, stickers or other

materials applied to their surface. Do not use discs that

have sticky residue from stickers, etc. Such discs could

become stuck in the unit or cause it to malfunction.

•

Never use a commercially available CD stabilizer. Using

stabilizers with this player will damage the mechanism

and cause it to malfunction.

•

Do not use cracked discs.

•

Only use circular compact discs. Avoid using

non-circular promotional, etc. discs.

•

Music discs with copy control, a copy-protection

system, have been released from several record

companies in an attempt to protect the copyright.

Since some of these discs do not comply with the CD

specifications, they may not be playable on the unit.

•

If you are in any doubt as to the care and handling of a

CD-R and CD-RW discs, read the precautions supplied

with the disc, or contact the disc manufacturer directly.

About CD-R and CD-RW discs

CD-R discs can be recorded once only. Once they have

been used for recording, they cannot be erased or

re-recorded. However, if space is available on the disc,

additional material can be recorded.

By finalizing a CD-R that you have finished using for

recording, you can make it playable by most ordinary CD

players. (Some CD players might not be able to play back

CD-R discs even if they are finalized.)

CD-RW discs allow recorded tracks to be erased to make

space available again, allowing disc reuse. However, tracks

can only be erased in the order from the last added. To

erase a track in the middle, you must erase all the tracks

added after it at the same time. Finalized CD-RW discs can

only be played back in CD players that support CD-RW

disc playback.

Slot loading of discs

1 As shown in the illustration, hold the disc with the

labeled side up and insert it part way into the slot.

2 After you push the disc a little further, it will be

pulled in automatically just before it disappears

into the slot.

Trouble inserting a disc

If the disc becomes stuck during insertion, for example,

and is difficult to push, do not try to force the disc in. Pull

the disc out once and press the EJECT button and then

try inserting it again. (Trying to force the disc in could

damage the unit.)

User registration

Customers in the USA, please visit the TASCAM website

(http://tascam.com/) to register as a user online.

1 − Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam SS-CDR100 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info