617918
24
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
24 TASCAM SS-CDR200/SS-R200/SS-R100
Turning the power ON/OFF
Press the front panel POWER switch to turn the power
ON.
Startup screen
Home Screen
The unit starts up and the startup screen appears. (The
example above is from an SS-CDR200.)
If no media is loaded in the current device, a
NO MEDIA
message appears.
If media is loaded in the current device, a
MEDIA
READING
message appears while the unit reads the
media. When completed, the Home Screen opens.
Turning the power OFF:
Press the POWER switch to turn the power OFF. No special
shutdown procedures are necessary.
CAUTION
Do not turn the power OFF when the unit is in use
(recording, playing back, writing data to USB/SD/CF
media, etc.). Doing so could cause recording to fail,
recorded data to be damaged, sudden loud noise to
be emitted from monitoring equipment, damage to
equipment and harm to hearing.
Setting the date and time
The date and time is added to the recorded file based on
the built-in clock.
1 Press the MENU [JOG] button (or remote control
MENU button) to open the
MENU
screen.
2 Open the
UTILITY
menu.
NOTE
The screen above is an example from an SS-CDR200 or
SS-R200 unit.
The SS-R100 does not have the
5.RS-232C
menu item.
3 Select
CLOCK ADJUST
.
4 Press the MULTI JOG dial or , [LOCK] button (or
remote control ENTER or t button) to open the
CLOCK ADJUST
screen.
5 Set the date and time with the following
operations.
Use the m [SKIP] and , [LOCK] buttons (or
remote control g and t buttons) to select the item
you want to set.
Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to change the selected
item.
6 After making the setting, press the MULTI JOG dial
(or remote control ENTER button) to confirm the
date and time and return to the
UTILITY
menu.
7 Press the HOME/DISPLAY button (or remote control
HOME/DISP button) to return to the Home Screen.
Adjusting the display
You can adjust the display contrast and brightness as
necessary.
Adjusting the display contrast
While pressing and holding the SHIFT button, turn the
MULTI JOG dial (or press the remote control LCD –/+
buttons) to adjust the display contrast.
3 − Preparations
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tascam SS-CDR100 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info