Bedienungsanleitung Tascam SS-CDR100 (Seite 43 von 84) (Englisch)

617918

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

TASCAM SS-CDR200/SS-R200/SS-R100 43

To stop recording:

Press the front panel or remote control STOP button.

When you stop recording, the recorded data will be

written and an audio file will be created.

NOTE

•

You can use the

WORD CLIP

item in the

REC OTHERS

menu to set the audio file name that is automatically

added to files when they are created. (See “Setting the

format for naming recorded files” on page 47.)

•

The maximum size of each track is 2 GB.

•

The recorded track will be created in the current folder.

(See “Folder operations” on page 51.)

CAUTION

While the recorded content is being written to the

recording media,

INFORMATION WRITING

will appear

the display. While this message is shown, do not move

the unit, turn off the power or remove the media from the

current device. The recorded content will not be able to

be saved correctly if you do so.

Finalizing CD-R/CD-RW discs

(SS-CDR200 only)

After you have recorded to a CD-R or CD-RW disc, you will

need to finalize the disc before the disc can be played

back by a CD player or CD drive other than this unit. The

finalization procedures using this unit depend on whether

the file format is MP3 or audio CD.

With MP3 format recordings:

The unit will automatically finalize the CD-R/CD-RW disc

when you eject it. This means that once you remove a

disc that was recorded in MP3 format, you will not be able

to add recordings to that disc. In addition, if you turn off

the power without ejecting the CD-R/CD-RW disc, the

unit will automatically finalize the disc the next time it is

powered-on.

You can also use the menu to finalize the disc without

ejecting it. (See “Finalizing discs” below.)

With audio CD format recordings:

If you have recorded in audio CD format, the unit will not

automatically finalize the disc. You will be able to make

additional recordings on that disc (as long as there is free

space remaining on the disc) until you finalize the disc

using the menu. However, the disc will not be playable

on other devices until you finalize it. For details on how to

finalize, refer to the following section.

Finalizing discs

As explained above, in order for a CD-R/CD-RW disc

recorded by the unit in audio CD format to be playable

on another device, that CD must be finalized manually.

Moreover, although discs recorded in MP3 format will be

finalized automatically when ejected, as described above,

you can also finalize a disc manually without ejecting it.

In either case, follow these procedures to finalize a disc.

1 Press the DEVICE button (or remote control DEVICE

SELECT button) to open the

DEVICE SELECT

screen, and select

. (See “Selecting the device

used” on page 26.)

2 Press the MENU [JOG] button (or remote control

MENU button) to open the

screen.

3 Open the

menu.

4 Select

FINALIZE

5 Press the MULTI JOG dial or , [LOCK] button (or

remote control ENTER button or t button).

A confirmation pop-up message appears.

6 Press the MULTI JOG dial or , [LOCK] button (or

remote control ENTER button or t button) again

to start finalization.

-- FINALIZE --

and a progress bar are displayed in

a pop-up during finalization.

When finalization is completed, the

menu will

reopen.

NOTE

You can unfinalize a finalized CD-RW disc. (See

“Unfinalizing CD-RW discs” on page 69.)

Sync recording

If the sync recording function is ON, recording will begin

automatically when the input signal exceeds the level set

in advance (SYNC LEVEL). After recording has begun, if the

input signal stays below the sync level for the specified

length of time (STOP TIME), the unit will end recording

and switch to recording standby automatically.

Sync settings

Use the menu to turn the sync recording function ON/

OFF and to make detailed settings. You can also use the

remote’s SYNC key to turn this function ON/OFF.

When the sync recording function is on,

SYNC REC

will

appear highlighted on the

FUNCTION

screen.

5 – Recording

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam SS-CDR100 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info