Bedienungsanleitung Tascam SS-CDR100 (Seite 68 von 84) (Englisch)

617918

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

68 TASCAM SS-CDR200/SS-R200/SS-R100

4 Press the MULTI JOG dial (or remote control ENTER

button) to open a pop-up window where you can

select the device.

5 Turn the MULTI JOG dial (or press the remote

control 5 and b buttons) to select the copy

destination device.

NOTE

•

If the selected device media is still being read,

MEDIA

READ

and a progress bar appear in a pop-up.

•

If the selected device media is not loaded, after

MEDIA

READ

ERROR

and the media type (

CF READ

, etc.)

appears in a pop-up.

6 Press the MULTI JOG dial (or remote control ENTER

button) to open the RIP

SOURCE SELECT

screen.

7 Select the file or folder to copy from the

RIP

SOURCE SELECT

screen. If you select a folder, all

the files in the folder will be copied.

To select multiple files or folders, when the desired

file or folder is selected, press the FUNCTION

button (or remote control FUNC button). Repeat

this for every file and folder.

Checkmarks (

) are placed next to selected files

and folders. You can only select multiple files and

folders if they are in the same folder.

To deselect a selected file or folder, press the

FUNCTION button (or remote control FUNC button)

once again.

NOTE

•

You can select multiple files and folders only within the

same folder, so once you use the FUNCTION button (or

remote control FUNC button) to select the first file or

folder, you will no longer be able to move to a different

folder.

•

If you are selecting only one file or folder, there is no

need to press the FUNCTION button (or remote control

FUNC button). After selecting the desired file, proceed

to step 5.

8 When you have selected all of the files you want to

copy, press the MULTI JOG dial (or remote control

ENTER button) to confirm the selections and open

the

RIP TARGET SELECT

screen where you can

select the copy destination.

NOTE

If the size of the source exceeds the remaining capacity

of the selected media, or the number of source tracks

would cause the number of files on the selected media

to exceed the limit file, a

CAPACITY OVER

or a

TRACK

OVER

message pop-up will appear accordingly, and you

will not be able to confirm the source selection. If this

occurs, press the STOP button to close the pop-up, and

deselect some source files until the total size or number

is acceptable. Then, press the MULTI JOG dial (or remote

control ENTER button) again.

9 Select the copy destination from the

RIP TARGET

SELECT

screen.

The folders or files will be copied after the selected

folder or file.

10 Press the MULTI JOG dial (or remote control ENTER

button) to confirm the copy destination.

A confirmation pop-up message appears.

NOTE

If there are files with the same name, the following

pop-up message will appear.

After this, the pop-up message disappears and the

menu screen opens.

11 Press the MULTI JOG dial (or remote control ENTER

button) again to start writing to the selected device

media.

-- R I P --

and a progress bar appear in a pop-up

while the files are copied.

When writing is completed, the

menu screen will

reopen.

10 - Copying files between CDs and other media (SS-CDR200)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam SS-CDR100 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info