Bedienungsanleitung Tascam SS-CDR200 (Seite 66 von 84) (Englisch)

617917

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

66 TASCAM SS-CDR200/SS-R200/SS-R100

•

If the total size of the copy-source files exceeds the free

space on the copy-destination disc,

CAPACITY OVER

appears in a pop-up after step 10.

•

If copying the copy-source files would exceed the

allowable number of tracks on the disc,

TRACK OVER

appears in a pop-up after step 10.

11 Turn the MULTI JOG dial (or press the remote

control 5 and b buttons) to select the destination

for the files.

If the disc already has a folder structure, select a

file or folder on the

FINDER

screen.

The folders or files will be copied after the selected

folder or file.

12 Press the MULTI JOG dial (or remote control ENTER

button) to confirm the selection.

A confirmation pop-up message appears.

NOTE

If there are files with the same name, the following

pop-up message will appear.

After this, the pop-up message disappears and the

menu screen opens.

13 Press the MULTI JOG dial (or remote control ENTER

button) again to start writing to the CD-R/CD-RW

disc.

-- BURN --

and a progress bar appear in a pop-up

while the disc is being written.

When writing is completed, the

menu screen will

reopen.

NOTE

When you press the EJECT button, the CD-R/CD-RW disc

will be finalized automatically before it is ejected. (See

“Finalizing CD-R/CD-RW discs (SS-CDR200 only)” on page

43.)

Converting CD files and copying them

to USB/SD/CF media

You can copy files from a CD to USB/SD/CF media with

or without conversion. When copying from an audio CD

to the media, each track file will be converted into the

format you specify (MP3 or WAV file).

When copying from a CD-R/CD-RW disc that contains MP3

or WAV files, the files can be copied in their current format.

Converting and copying audio CD tracks

The following explains how to convert audio CD format

files on a CD into MP3 and WAV format and copy them to

the selected media (USB/SD/CF media).

The following procedure assumes that

is selected

as the current device and that a CD that contains the

copy-source files and the copy destination media are

loaded in the unit.

1 Press the MENU [JOG] button (or remote control

MENU button) to open the

screen.

2 Open the

menu.

3 Select

RIP TO MEMORY

, and press the MULTI JOG

dial (or remote control ENTER button).

4 Press the MULTI JOG dial (or remote control ENTER

button) to open a pop-up window where you can

select the device used.

5 Turn the MULTI JOG dial (or press the remote

control 5 and b buttons) to select the copy

destination device.

6 Press the MULTI JOG dial (or remote control ENTER

button) to open a pop-up window where you can

set the file format.

NOTE

•

If the selected device media is still being read,

MEDIA

READ

and a progress bar appear in a pop-up.

•

If the selected device media is not loaded, after

MEDIA

READ

ERROR

and the media type (

CF READ

, etc.)

appears in a pop-up.

10 - Copying files between CDs and other media (SS-CDR200)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam SS-CDR200 Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info