- Remove the water from the water tank.
Safety thermal protector:
- The appliance has a safety device, which
protects the appliance from overheating
Cleaning
- Disconnect the appliance from the mains
and let it cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with
a few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
- Do not submerge the appliance in water or
any other liquid, or place it under a running
tap.
Self-cleaning function:
- It is important to self-clean the appliance at
least once a month to remove calcium and
any other built-up minerals inside the iron.
- Fill the depository to its maximum level, as
indicated on “water ll” section.
- Place the iron in a vertical position, plug
in to the mains m and select the maximum
temperature.
- Leave the appliance to heat up until the
pilot light indicates that it has reached its
consigned temperature.
- Unplug the appliance and place in the sink.
- Press the self-clean button, and keep it
pressed down.
- Let the water ow out through the steam
vents in the base, while lightly shaking the
appliance.
- Release the button after a minute or when
the tank becomes empty.
- Leave the iron in the vertical position until it
has cooled.
How to deal with lime scale incrustations:
- For the appliance to work correctly it should
be kept free of lime scale or magnesium
incrustations caused by the use of hard water.
- To prevent this kind of problem, we
recommend the use of water with low lime or
magnesium mineralization.
- However, if it is not possible to use the kind
of water recommended above, you should
periodically remove the lime scale from the
appliance:
- Every 6 weeks if the water is “very hard”.
- Every 12 weeks if the water is “hard”.
- To do so, we recommend the use of the
specic product Taurus Decal, which can be
found in specialised shops and authorised
technical services.
- A specic anti-lime scale product should be
used on this kind of product.
- Homemade solutions are not recommended
in the de-scaling of this appliance, such as the
use of vinegar.
Anomalies and repair
- Take the appliance to an authorised
technical support service if problems arise.
Do not try to dismantle or repair without
assistance, as this may be dangerous.
- If the connection to the mains has been
damaged, it must be replaced and you should
