488360
14
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
then dry.
- Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
- Do not submerge the appliance in water
or any other liquid, or place it under a
running tap.
- During the cleaning process, take special
care with the blades, as they are very
sharp.
- It is advisable to clean the appliance
regularly and remove any food remains.
- If the appliance is not in good condition
of cleanliness, its surface may degrade
and inexorably affect the duration of the
appliance’s useful life and could become
unsafe to use.
- The following pieces may be washed in a
dishwasher:
- Food pusher
- Lower support platform
- Blade
To disassemble the blade:
- The blade can be removed for cleaning.
To do so, use a screwdriver to loosen the
three bolts on the blade and take off the
blade carefully. After cleaning, install the
blade with the bolts.
Anomalies and repair
- Take the appliance to an authorised
technical support service if problems arise.
Do not try to dismantle or repair without
assistance, as this may be dangerous.
- If the connection to the mains has been
damaged, it must be replaced and you
should proceed as you would in the case
of damage.
Ecology and recyclability of the product
- The materials of which the packaging
of this appliance consists are included in
a collection, classification and recycling
system. Should you wish to dispose of
them, use the appropriate public containers
for each type of material.
- The product does not contain
concentrations of substances that could be
considered harmful to the environment.
- Should you wish to dispose of the product
once its working life has ended, take it to
an authorised waste agent for the selective
collection of waste from electric and
electronic appliances.
This symbol means
that; should you wish to
dispose of the product
once its working life
has ended, take it to
an authorised waste
agent for the selective
collection of Waste from Electric and
Electronic Appliances (WEEA).
This appliance complies with Directive
2006/95/EC on Low Voltage and Directive
2004/108/EC on Electromagnetic
Compatibility.
Manual Cutmaster.indd 14 17.06.08 14:16:10
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Taurus Cutmaster wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info