Bedienungsanleitung Taurus Geyser Diamond 2400 (Seite 16 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

585899

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

- The water ﬁll-up opening must

not be left open while the iron is

being used.

- Never leave the appliance unat-

tended while in use.

- Never leave the appliance

connected and unattended if is

not in use. This saves energy and

prolongs the life of the appliance.

- Never rest the appliance into a

surface while in use.

- Do not use the appliance on any

part of the body of a person or

animal.

- Do not use the appliance to dry

textiles of any kind.

- CAUTION: Do not sleep while

using this appliance, as there is

risk you could be harmed.

- Turn the thermostat control to

the minimum (MIN) setting. This

does not mean that the iron is

switched off permanently.

Service:

- Make sure that the appliance

is serviced only by specialist

personnel, and that only original

spare parts or accessories are

used to replace existing parts/

accessories.

- Any misuse or failure to fo-

llow the instructions for use

renders the guarantee and the

manufacturer’s liability null and

void.

Instructions for use

Before use:

- Remove the appliance’s protective ﬁlm.

- Make sure that all the product’s packaging has been

removed.

- Some parts of the appliance have been lightly greased.

Consequently, the ﬁrst time the appliance is used a light

smoke may be detected.

- Prepare the appliance according to the function you

wish to use.

Filling with water:

- It is essential to have ﬁlled the deposit with water to be

able to work with steam.

- Open the lid of the ﬁlling mouth.

- Fill the deposit taking care to observe the MAX level

(Fig. 1)

- Close the lid of the ﬁlling mouth.

Use:

- Unroll the cable completely before plugging it in.

- Connect the appliance to the mains.

- Turn the thermostat control to the desired temperature

position.

- Do not use temperatures higher than those indicated on

the garments to be treated.

• Temperature for synthetic ﬁbres (Polyester, Nylon…).

• • Temperature for silk, wool.

• • • Temperature for cotton. (Minimum temperature for

steam ironing)

Max Temperature for linen.

- If garment has various kinds of ﬁbres, select the tempe-

rature for the ﬁbre that requires the lowest temperature.

(For example, select the temperature for polyester for an

article made out of 60% polyester and 40% cotton).

- Wait until the pilot light (F) has gone out which will

indicate that the appliance has reached an adequate

temperature.

- During use the pilot light (F) will automatically ﬂash

on and off, thus indicating that the heating elements are

operating in order to maintain the desired temperature.

Dry ironing:

- The appliance has a steam ﬂow regulator that permits

dry ironing (without steam) when placed in the 0 posi-

tion.

Steam Ironing:

- It is possible to iron with steam whenever the deposit

is ﬁlled with water and the adequate temperature is

selected.

Steam ﬂow control:

- The appliance has a (C) control knob that allows to get

the control of the steam ﬂow.

Spray:

- The spray can be used in both steam and dry ironing.

- Press the spray button ( A ) to use this operation.

- The spray button has to be pressed repeatedly to release

the ﬁrst spray.

Manual Geysers.indb 16 26/06/12 16:17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Taurus Geyser Diamond 2400 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info