Bedienungsanleitung Taurus Geyser Titanium 2600 (Seite 17 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

585900

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Steam blast:

- This function proportions extra steam for eliminating

wrinkles.

- Press the steam blast button (B). Wait a few seconds

until vapour penetrates the ﬁbres of the garment before

pushing the button again. For optimum steam quality, do

not apply more than three successive blasts.

- The spray button has to be pressed repeatedly to release

the ﬁrst spray.

Vertical steaming

It is possible to iron hanging curtains, items of clothing

on his hanger, etc. To do so, follow the instructions:

- Select the maximum temperature of the iron, while tur-

ning the temperature regulator of the iron in a clockwise

direction.(Fig 2)

- Move the iron in a top to bottom direction while pres-

sing the steam control ( B ). Important: for cotton and

linen, its recommended to put the iron base in contact

with the material. For other more delicated ﬁbres, it’s

recommended to keep the iron base at some centimetres

of distance.

Auto-off function: *

- For energy-saving purposes, the appliance goes to auto-

off status if it is not moved for a pre-determined time

period. When this happens, an audible warning is heard

and the auto-off indicator lamp (G) ﬂashes, indicating

that the function is active.

- Auto-off in horizontal position: after approximately 30

seconds without moving the appliance.

- Auto-off in vertical position: after approximately 8

minutes without moving the appliance.

- To return to normal functioning, simply move the

appliance again.

(*) Only available in model Geyser Titanium 2600

Once you have ﬁnished using the appliance:

- Select the minimum position (MIN) using the thermos-

tat control.

- Unplug the appliance to the mains.

- Remove the water from the water tank.

- Clean the appliance

Cleaning

Disconnect the appliance from the mains and let it cool

before undertaking any cleaning task.

- Clean the equipment with a damp cloth with a few

drops of washing-up liquid and then dry.

- Do not use solvents, or products with an acid or base

pH such as bleach, or abrasive products, for cleaning the

appliance.

- Do not submerge the appliance in water or any other

liquid, or place it under a running tap.

Self-cleaning function:

- It is important to self-clean the appliance at least once

a month to remove calcium and any other built-up mine-

rals inside the iron.

- Fill the depository to its maximum level, as indicated on

“water ﬁll” section.

- Place the iron in a vertical position, plug in to the mains

m and select the maximum temperature.

- Leave the appliance to heat up until the pilot light indi-

cates that it has reached its consigned temperature.

- Unplug the appliance and place in the sink.

- Press the self-clean button, and keep it pressed down.

- Let the water ﬂow out through the steam vents in the

base, while lightly shaking the appliance.

- Release the button after a minute or when the tank

becomes empty.

- Leave the iron in the vertical position until it has

cooled.

Anomalies and repair

- Take the appliance to an authorised technical support

service if problems arise. Do not try to dismantle or repair

without assistance, as this may be dangerous.

- If the connection to the mains has been damaged, it

must be replaced and you should proceed as you would

in the case of damage.

For EU product versions and/or in case that it is reques-

ted in your country:

Ecology and recyclability of the product

- The materials of which the packaging of this appliance

consists are included in a collection, classiﬁcation and

recycling system. Should you wish to dispose of them,

use the appropriate public recycling bins for each type of

material.

The product does not contain concentrations of substan-

ces that could be considered harmful to the environment

This symbol means that in case you wish to

dispose of the product once its working life has

ended, take it to an authorised waste agent for

the selective collection of waste electrical and

electronic equipment (WEEE)

This symbol indicates that the surface may heat

up during use.

This appliance complies with Directive 2006/95/EC on

Low Voltage and Directive 2004/108/EC on Electromag-

netic Compatibility.

Manual Geysers.indb 17 26/06/12 16:17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Taurus Geyser Titanium 2600 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info