Bedienungsanleitung Taurus GRECO16CR ELEGANCE (Seite 12 von 68) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

729647

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ASSEMBLING THE BASE (DESK FAN):

- To x the base into the appliance, place the

appliance face down.

- Fit the base on the main body of the appliance.

- Fix the base using the screws provided (M).

- Stand the appliance up again so as to check

that the base works properly.

FITTING THE BASE FEET (CROSS BASE

STAND FAN):

- The appliance has anti-slip base feet (V) that

support the product.

- Position the base feet on the body of the

appliance.

- Position the base feet on the body of the

appliance using the screws (Fig.1).

FITTING THE BASE (ROUND BASE STAND

FAN):

- The appliance has anti-slip base (U) that sup-

port the product.

- To assemble the base, place the appliance

face down.

- Position the base feet on the body of the

appliance.

- Position the base on the body of the appliance

using the screws (Fig.2).

- Stand the appliance up again so as to check

that the base work properly.

ASSEMBLING THE GRILL AND THE

PROPELLER:

- Fit the rear grill (G) on the motor housing (I),

matching their tting points.

- Tight the grill nut (F) that attaches the grill,

Make sure of a correct setting.

- Fit the propeller (E) On the motor shaft (H).

- Tight the nut (D) that attaches the propeller,

Make sure of a correct setting.

- Fit the front grill (C) front the rear grill (G), mat-

ching the security screw position. Fix the front

grill turning around its xing belt (A) and tight

the security screw (B) by using a screwdriver.

- Check the correct rotation of the propeller.

INSTRUCTIONS FOR USE

BEFORE USE:

- Make sure that all products’ packaging has

been removed.

USE:

- Unroll the cable completely before plugging it

in.

- Connect the appliance to the mains.

- Guide the appliance to direct the ow of air in

the desired direction.

- Turn the appliance on, by using one of the

speed selection buttons.

OSCILLATION FUNCTION:

- The oscillation function makes it possible to

direct the ow from the apparatus so that it

automatically alternates over a range of 75º.

- To activate this function, press the (J) switch.

- To deactivate this function, follow the procedu-

re for switching it on in reverse.

HEIGHT ADJUSTMENT

- The appliance height can be adjusted, it’s just

necessary to unlock the knob (Q) place the

appliance at the desired height and lock again

the knob (Q).

CARRY HANDLE/S:

- This appliance has a handle on the upper part

of the body, which facilitates comfortable trans-

portation (Fig.3).

ONCE YOU HAVE FINISHED USING THE

APPLIANCE:

- Stop the appliance, selecting position 0 on the

selector control.

- Unplug the appliance from the mains.

- Clean the appliance.

CLEANING

- Disconnect the appliance from the mains and

allow it to cool before undertaking any cleaning

task.

- Clean the equipment with a damp cloth with a

few drops of washing-up liquid and then dry.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Taurus GRECO16CR ELEGANCE Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info