Bedienungsanleitung Taurus Hexa Striker Robot (Seite 9 von 36) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

586126

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

- Put the battery in its compartment, respecting the polarity (Fig. 1)

- Close the cover of the battery compartment.

Assembling the side brushes:

- Place the side brush on the side brushes holder.

- Press until you hear a click. (Fig.2)

Instructions for use

Before use:

- Before using this product for the rst time, it is important to make a full charge

of batteries.

Use:

- Once the battery is charged, Turn the appliance on using the on/off switch.

- The appliance will begin to function automatically until its batteries run out.

- While the appliance is operating the battery charging/battery charged and

battery low indicator lamps will alternate.

- When the batteries are low, the red battery low indicator lamp will light up.

- When the deposit is full, the full deposit indicator lamp will come on and the

deposit must be emptied.

Once you have nished using the appliance:

- Turn the appliance off, using the on/off switch.

Cleaning

- Disconnect the appliance from the mains and let it cool before undertaking

any cleaning task.

- Disconnect the charger from the mains and let it cool before undertaking any

cleaning task.

- Remove the battery before starting any cleaning operation.

- Clean the equipment with a damp cloth with a few drops of washing-up liquid

and then dry.

- Do not use solvents, or products with an acid or base pH such as bleach, or

abrasive products, for cleaning the appliance.

- Do not let water or any other liquid get into the air vents to avoid damage to

the inner parts of the appliance.

- Do not submerge the appliance in water or any other liquid, or place it under

a running tap.

- Never submerge the connector in water or any other liquid or place it under

running water.

Emptying the dust box:

- Empty the dust box each time after use.

- Open the lid of the dust box. (Fig.3)

Disconnect the dust box from the appliance.

- Open the dust box emptying lid and empty its contents into a suitable rubbish

bin (Fig.4)

- Check the condition of the dust box lter and replace it.

- Close the lid of the dust box.

- Attach the dust box to the appliance.

Changing the lters:

- It is recommended that the dust box lter should be changed every three

months.

- To remove lters:

- Open the lid of the dust box. (Fig. 5)

- Disconnect the dust box from the appliance.

- Open the dust box emptying lid and remove the dust box lter from its bracket.

(Fig.6)

- To reassemble the lter, proceed with the above instructions, in reverse order.

Changing side brushes:

- To remove the side brushes

- Pull the bristles of the brush until it disengages from the side brush assembly.

- To install side brushes, proceed with the above instructions in reverse order.

Supplies:

- Supplies can be acquired from distributors and authorised establishments

(such as lters, etc. ) for your appliance model.

- Always use original supplies, designed specically for your appliance model.

Anomalies and repair

- Take the appliance to an authorised technical support service if problems

arise. Do not try to dismantle or repair without assistance, as this may be

dangerous.

For EU product versions and/or in the case that it is requested in your country:

Ecology and recyclability of the product

- The materials of which the packaging of this appliance consists are included in

a collection, classication and recycling system. Should you wish to dispose of

them, use the appropriate public recycling bins for each type of material.

The product does not contain concentrations of substances that could be

considered harmful to the environment

- This symbol means that in case you wish to dispose of the

product once its working life has ended, take it to an authorised

waste agent for the selective collection of waste electrical and

electronic equipment (WEEE)

This symbol means that the product may include a battery or

batteries; the user must remove them before disposing of the

product. Remember that batteries must be disposed of in duly

authorised containers. Do not dispose of them in re.

How to remove the batteries from the interior of the device:

It is important that the batteries are fully discharged prior to its withdrawal from

the apparatus.

To remove the batteries, once the life of the appliance, proceed as follows:

- Remove the cover of the battery compartment.

- Remove the battery from its casing.

- Close the cover of the battery compartment.

This appliance complies with Directive 2006/95/EC on Low Voltage and Directi-

ve 2004/108/EC on Electromagnetic Compatibility.

Manual Robot Quoin.indb 9 04/02/14 13:11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Taurus Hexa Striker Robot Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info