Bedienungsanleitung Taurus PROFESSIONAL 1500 (Seite 9 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

729434

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ing, up to desired snowy level.

- We recommend working by turning on the

button in cycles of 3 seconds and repeating the

operation until you obtain the desired result.

CABLE COMPARTMENT

- This appliance has a cable compartment situat-

ed on its underside (I).

SAFETY THERMAL PROTECTOR:

- The appliance has a safety thermal device,

which protects the appliance from overheating.

- In the event of overheating, the thermal safety

mechanism will be activated and the appliance

will stop operating. When this occurs, the ap-

pliance should be disconnected from the mains

and allow it to cool down.

- Once the appliance is cool, the thermal safety

mechanism will reset by itself.

SAFETY OVERLOAD PROTECTOR:

- The appliance has another safety device which

protects the appliance from overload.

- In the event of overload, the safety mechanism

will be activated and the appliance will stop

operating. When this occurs, the appliance

should be disconnected from the mains and

allow it to cool down.

- Then press the rearming button, situated at the

bottom of the appliance, with the tip of a pen

or similar in order to reactivate the appliance.

(Fig.2)

- Wait for approximately 15 minutes before re-

connecting. If the machine does not start again

seek authorised technical assistance.

CLEANING

- Disconnect the appliance from the mains and

allow it to cool before undertaking any cleaning

task.

- Clean the equipment with a damp cloth with a

few drops of washing-up liquid and then dry.

- Do not use solvents, or products with an acid or

base pH such as bleach, or abrasive products,

for cleaning the appliance.

- Do not let water or any other liquid get into the

air vents to avoid damage to the inner parts of

the appliance.

- Never submerge the appliance in water or any

other liquid or place it under running water.

- During the cleaning process, take special care

properly into place (Fig.1).

- Put the ingredients, after having rst chopped

them into small piece, into the jar with liquid (do

not exceed the maximum marker).

- Use stirrer bar to introduce food easily.

- Put the lid on the jar; make sure it is properly

xed in place.

- Put the transparent cup in the lid.

- Connect the appliance to the mains.

- Start the appliance by turning on the ON/OFF

button (F). ATTENTION: before turn on the ON

button, be sure to set the minium speed.

- Choose desired speed using the speed regu-

lator control and start blending. ATTENTION:

hold the jar if uses high speeds.

- If you wish to add more ingredients pull out the

transparent cup.

- Add the ingredients and replace the transpar-

ent cup.

- To stop the appliance, selecting OFF option of

the button (F).

- To avoid a erce, start up of the fan, it is

advisable to start off from the lowest speed

position and, once the fan has been switched

on, progressively increase the speed to the

desired position.

ELECTRONIC SPEED CONTROL:

- The speed of the appliance can be regulated

by using the speed regulator control (G). This

function is very useful, as it makes it possible

to adapt the speed of the appliance to the type

of work that needs to be done.

ONCE YOU HAVE FINISHED USING THE

APPLIANCE:

- Stop the appliance, selecting OFF option of the

button (F).

- Unplug the appliance from the mains.

- Lift the jar from the motor body.

- Clean the appliance.

- ATTENTION: for your safety and to extend the

life of the device, the blades are not removable.

“PULSE / ICE CRUSH” FUNCTION

- The appliance works in highest speed to

achieve optimal performance.

- Turn on this button to operate and release the

button when you wish to stop operating.

- This function gives optimal result for ice-crush-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Taurus PROFESSIONAL 1500 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info